|
| 1 | Excavation in trenches inany type of soil not exceeding 1.5 mtr wide and n.exe 1.5 mtr depth including getting out all as specified and directed.Note : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing new jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/ per day will be imposed to contractor till rectification of defects. In this aspectGE decision will be final , conclusive and binding. |
| 2 | Returning filling in any type ofsoil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed. |
| 3 | Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all asspecified and directed. |
| 4 | M&L providing sand cushioning with a layer of clean, dry, fine sand for protection of electric cable laid in trenches/ducts, punned down to desired thickness complete all as specified and directed.(Note: For payment purposes only punned down thickness of sand shall be measured ) |
| 5 | Supply and laying sub class ‘B’, bricks, in cable trenches, as cable protection complete all as specified and directed. |
| 6 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured,2core with reduced neutral conductors (2 core), nominal cross sectional area of main conductor 16 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed. |
| 7 | Supply and Laying galvanized steel tubing,40 mm bore, light grade, in trenches or fixed to poles/Walls etc, for cable protection, with and including taking out existing unservieable complete all as specified and directed. |
| 8 | Horizontal boring of holes, under road/ pavement / hard standing etc.,not exceeding 10 Metres in length, in any type of soil, suitable for passing through upto 40 mm bore, galvanised steel tubing,complete all as specified and directed. |
| 9 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Single pole & neutral with 100 amps rated bus bar, 415Volt door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43,IK 09, Conf to IS 8623-1&3 , IEC 61439-3, having Neutral and earth bar , cable ties for cabel management, fully shrouded neutral bar, reversible door option, blanking plate including fixing the DB box flush in wall of any type and making good the distrubed surface to match asthe existing withall as specified and directed by Engr-in-charge. Note : (i) MCCB and DB box shall be of same make. |
| 10 | S & F circuit breakers (MCB), two pole with one protected pole (SPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current32 to 63 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. |
| 11 | S & F circuit breakers (MCB), single pole (SP), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6A to 32 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. |
| 12 | Taking down ceiling fan, sealing cable end,dismantling blades ,removing fan and blades with and incldingdisconnecting the electric supplyfromany site, checking for its electrical defect and opening fans for checking of mechanical defect afterdismantling of fan, carry out repair/over hauling including removing dust and grease, and cleaning of internal mechanical parts of fan with lubricant as per OEMs specification, checking of alignment of shaft, oiling and greasing, checking of worn out bearing and other defective parts, , condenser etc and re-assembling, and connecting/refixing of fans in its original position , replacement of defective parts,re-assembling, including testing and commissioning, by providing newGI nut bolt, lock washer and lock/split pin complete all as specified with and including taking outswitches and fan regulators to store for re-fixing completeall as specified and directed. |
| 13 | Materials and Labour for point wiring with 1.50 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade single core laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ ceiling including sunk type pressed steel terminal boxes 60mm deep , conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI marked) for mounting switches/regulator etc and including 1.50 Sq.mm (Nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade , single core, earth continuity conductor connected to common earth dolly for one light/fan point controlled by one switch including taking down carefully existing copper/aluminium point wiring (light, fan, socket or point) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc removing materials from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed |
| 14 | Supply and Hanging, ISI marked ceiling fan, 1200 mm sweep with down rod, canopy, fan blades,safety wireand connected accessories, BEE 5 Star Rated, Service value not less than 7.00 all as per Model “TECHNIX BLDC ” of Make ‘USHA’ or equivalent Model of Make ‘Bajaj’/’Cromptron Greaves’/’Havells or approved ADG(NEI) group I make’, and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan complete all as specified and directed |
| 15 | Hanging only ceiling fan and connecting up including provision of down rod upto 1.5mnot less than 12mm , with necessary clamps , nuts , bolts and welding work if required including cutting/drillingof existing Roof/false ceiling board and provision of hanging arrangement including1.5 Sqmm PVC insulated unsheathed multistranded (green colour) copper conductor cable 1100 volts grade, 3 core, earth continuity conductor cable from ceiling rose or connector to fan complete all as specified and directed. |
| 16 | S & F switch, 6A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed. |
| 17 | S&Fmodular electronic fan regulator 120 watt 2 module suitablefor 1200/1400 mm sweep energy saving fans(BLDC) ,ISI marked and with all connected accessories complete all as specified and directed. |
| 18 | Fixing only in repair fan regulator , switches and sockets and connecting complete in new location complete all as specified and directed. |
| 19 | Supply and fixGI Pipe 40mm medium grade with all connectedfittings fixed to walls/ceilings including necessery masonary /drilling/welding works complete as per site condition all as specified and directed. |
| 20 | Supply and fix 3mm thick plastic laminated sheet cover (ISI marked) of size 175mm x 225mm for mounting switches / regulatoretc and refixing the existing items complete all as specified and directed. |
| 21 | Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 2.5. Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including stove enamelled steel conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 2.5.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring including Conduit fittings etc and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed. |
| 22 | Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including stove enamelled steel conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring including Conduit fittings etc and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed. |
| 23 | Supply and Fix, Heavy Duty Air circulator, 600 mm sweep, 1440 RPM, Single Phase, 230 V, 50 Hz, all as per Model “Turbo Force Wall” of Make ‘Havells’ or equivalent Model of Make ‘Bajaj’ /’Cromptron Greaves’/’USHA’ with metal frameand connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fanwith complete with , complete all as specified and directed. |
| 24 | S & F (3 pin and 3 pin) with common earthing pins, combined switch socket outlets, 6A & 16A, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B complete all as specified and as directed. |
| 25 | Material and labour for welding and necessery connection for fixing wall fan in iron/hard wall surfaces including flat iron tube required size as per required at site condition,with and including clamps and nut bolts etc and connected fittings complete all as specified and directed. |
| 26 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, Single pole & neutral with 100 amps rated bus bar, 415Volt door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43,IK 09, Conf to IS 8623-1&3 , IEC 61439-3, having Neutral and earth bar , cable ties for cabel management, fully shrouded neutral bar, reversible door option, blanking plate including fixing the DB box flush in wall of any type and making good the distrubed surface to match asthe existing withall as specified and directed by Engr-in-charge. Note : (i) MCCB and DB box shall be of same make. |
| 27 | S & F circuit breakers (MCB), single pole (SP), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6A to 32 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. |
| 28 | S & F circuit breakers (MCB), Single pole with three protected pole (SPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage 220 V three phase, rated frequency 50 Hz, Rated current 6A to 32 A,, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. |
| 29 | Supply and Fix Triple pole metal encolsure with 6 pin Industrialsocket complete with one triple pole MCB 63 Amps, 415V, conforms to IS 8623-1 & 3, IEC 61439-1&3 suitable for surface and flush mounting and socket conforms to IS 8804 including necessery fixing arrangements clamps nut bolts etc complete all as specified and directed. |
| 30 | Supply and Fix Triple pole metal encolsure with5 pin indistrial socket socket complete with one triple pole MCB 32 Amps, 415V,conforms to IS 8623-1 & 3, IEC 61439-1&3 suitable for surface and flush mounting and socket conforms to IS 8804 including necessery fixing arrangements clamps nut bolts etc complete all as specified and directed. |
| 31 | Supply and Fix Double pole and metal encolsure with3 pin industrial socket complete with one SPN MCB 32 Amps, 230V,conforms to IS 8623-1 & 3, IEC 61439-1&3 suitable for surface and flush mounting and socket conforms to IS 8804 includingnecessery fixing arrangements clamps nut bolts etc complete all as specified and directed. |
| 32 | Materials and Labour for four single core FRLSH PVC insulated unsheathed cable 25.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including stove enamelled steel conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 2x6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring including Conduit fittings etc and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed. |
| 33 | Supply, installation, testing and commissioning of maintenance free (Four spikes) chemical earthing systemusing17.2mm dia, 3000mm long (drawn vertically) high tensile low carbon steel circular rod, molecularly bonded with copper onouter surface (minimum copper bonding thickness of 250 microns)meeting the requirements of under writers laboratories (UL) 467-2007 or latest with 250mm long copper strips of size (50X3)mm, exothermally welded on top of electrode complete including augering (boring) 100-125mm dia hole as required for electrode in any type of soil and back filling with chemical compound earth enhancing back filled compound as per IEEE 80 2000 clause 14.5b, conforming to IEC 62561-7, min quantity ofcompound used 40 Kg per electrode and minimum 62 Kg earth enhancing back filled compound as per IEEE 80 2000 clause 14.5b, conforming to IEC 62561-7 required for mixing with soil for pit to pit interconnection or more quantity of BFC if required to achive less than one ohms, However extra chemical is required to fill the hole around the rod, same shall be arranged by the contractror at his own cost and cost of the same is deemed to be included in the unit rate of this item) conforming to IEEE/BS standrads with agricultural soil for each pit and pit to pit interconnection, incl HDPE pit cover light weight made out of high quality polymer with lid made of HDG steel and U-clamp copper nut & bolt & gun metal body 1 No. per electrode required for joining all three electrodes complete all as specified and as directed. Note:- (i) The work of earthing shall be carried out by authorised trained rep of OEM. (ii) The acceptable earth resistance at earth busbar/ test point shallbe below 01 ohm, if earth resistance value below 01 ohm not come, contractor has to make additional earthing with interconnection to same earthing, Cost for additional earthing and interconnection to same earthing with copper strip will not paid seprately. (iii) The procedure mentioned here-in-before for one earth pit shall be repeated for other earth pits. (iv) Copper strip 20x3.15 mm required for joining these four electrodes in loop shall be measured and paid seperately . (v)The distance between two successive earth electrodes shall not be less than 3 metres.(vi) The rate quated shall also be included the following elements: (a)Complete earthwork including drilling holes for electrode.(b) Earhing electrode-04 only (c) Backfilling carbon based ground enhancing compound (GEC) (d) Pit cover light weight made out of high quality polymer with lid made of HDG steel. (e) Agricultural Soil required for each pit and pit to pit interconnection |
| 34 | Make : Copper electrode : True Power Earthing Pvt Ltd. Model No. MTPCBR (3 MTR Long, ) Product code CE -E-003 or equivelant make. Back fill compound : Marconite : Product of Carbon International Ltd. UK.\"Marconite\"electrically conductive aggregate, to be used as backfillto enhance the effect of earth electrode or OEM recommendation and suitable for rock and all type of ground conditionhaving low resistivityup to 0.001 Ohm meter, inert PH material, Corrosion free green product in bag of 25 Kg each) Note :-(i) Design of earth electrode should be of Strip -in-pipetechnology .(ii) Contractor have to submit literature of earth electrode and get the make approved of GE before procurement. (iii) The earth electrode shall be CPRI approved.(iv) Contarctor has to fill pure back fill compound all around the earth electrodein 300 mm bore up to full depth of bore. (v) Copper strip will be laid below 20 cm from ground level and connecting the test point through plinth protection using HDPE pipe for protection, necessary cost of repair to plinth protection and brazing and welding deemed to be included in the item. (vi) Contarctor shall submit the test report of earthing after completing the work of earthing.(vii) Contractor shall remove and disposed off the soil excavated from boring and clear the site before completion of work.(viii) Contractor has to submit the test certificate of electrode and back fill compound before claiming the payment. (ix).The cost ofCopper strip of size 20X3.15 mm from top of earth plate upto 7.5 meter above ground level is deemed to be included in the unit rate of above item.and copper strip beyond 7.5 RM will be measured seperately. |
| 35 | Supply and fixing copper strip of size 20 x 3.15mm as earth continuity conductor or main earthing lead fixed on \"V\" typeporcelain insulator, 4 BM, heavy duty ( ceramic bus bar supportinsulator off whitecolour ofsuitable for mounting strip of 20 mm wide x 3 min thick) saddle to wall, buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3 mm copper strip brazingto each joints and connected with by providingbrassnut boltsand washer all as specified and directed by Engr in Charge. Note : Insulators shall be provided on every 50 cm. (Minimum 2 x insulators to be provided in every 1 x metre of strip and rate of the same deemed to included in quoated rates) |
| 36 | M&L in repair for Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed incl 3 Nos 8mm dia 25mm long hexagonal head screws for fixing strips to test point including necessary fixing arrangement to fix test point terminal block in junction box complete all as specified and directed. |
| 37 | Supply and Fix in repair, Cable Junction Box, IP66 ‘halogen free and weather proof’, size 210 mm (W) x 260 mm (H) x 117 mm (D), with knock outs for cable entry for cable size 16-35 sq mm with 03 (Three) Nos.Grommets, IP 65, cable entry M 32,of Make “Hensel”KM8350 or equivalent Model of Make ‘Sintex Industries Ltd’/\"C&S Electric Ltd\",fixed to wall/ pole with suitable aluminium strip clamp 25 X 3 mm, nuts, bolts and washers, including provision of 15 Amps,4 pole,open bakelite terminal block connector,complete all as specified and directed. |
| 38 | M&L for cutting the road/hard standing and making good disturbed surface by using PCC type C2 (1:3:6) by using 20 graded stone aggregate for the fixing the pipe complete all as directed by the Engr-in-Charge at site. |
| 39 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) |
