}

Tender For Pond Rejuvenation In Village-Sakka,Yea .Wc-06 - Cleaning Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1M Aboveground Level And Removal Of Rubbish Up To Distanc, Gautam Buddha Nagar-Uttar Pradesh

Yamuna Expressway Industrial Development Authority has published Tender For Pond Rejuvenation In Village-Sakka,Yea .Wc-06 - Cleaning Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1M Aboveground Level And Removal Of Rubbish Up To Distanc. Submission Date for this Tender is 27-02-2025. Lake Development Tenders in Gautam Buddha Nagar Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

47805403
Tender For Pond Rejuvenation In Village-Sakka,Yea .Wc-06 - Cleaning Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1M Aboveground Level And Removal Of Rubbish Up To Distanc
Open Tender
NCB
Uttar Pradesh
Gautam Buddha Nagar
27-02-2025

Tender Documents

Tender Details

Tender For Pond Rejuvenation In Village-Sakka,Yea .Wc-06 - Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m aboveground level and removal of rubbish up to distance of 50m out side the periphery of the area cleared 2 Pumping out water by Diesel pump of discharge capacity of4000 lts per hour including fuel operator , suction & delivery pipes of size 4 X 4 length 150 as per direction of Engineer in Charge 3 Item code morth 301Excavtion in soil usinghydraulics excavator and tippers with disposal upto 1000 metersExcavation for road workin soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopesin accordance withrequiremements of lines , grades and cross section and transportation to the embankment locationwithin all lifts and lead upto 1000 meters 4 Add extraa for sludge/mud/liquid 50% of item no. 3 5 Laying non-pressure NP2 class R.C.C Pipe jointed with stiff mixture of cement mortar in the proportion of 1:2(1 cement : 2 coarse sand ) including testing of joints etc. complete 6 Cement concrete with 4cm gauge approved stone ballast coarse sand and cement in the proportion of 8:4:1 including supply of all material labour tools and plants etc required for all complation of work (item code 5:4;3) 7 cement concrete with 4cm gauge approved stone ballast coarse sand and cement in the proportion of 8:4:1 including supply of all material labour tools and plants etc required for all completion of work (item code 5.4.3) 8 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-charge1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 9 Steel Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level thermo mechenically treated bars 10 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DAR/10.25.2/Based on UPPWD/SOR-2020)) 11 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 12 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). 13 Centering and shuttering including strutting, propping etc. and removal of form for: foundation, footing, bases of column, etc for mass concrete 14 Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, Beam, plinth beam, griders, bressumers and cantilevers 15 Centering and shuttering including strutting, propping etc. and removal of form for: Column, pillare, Piers, Abutments, Posts and Struts

Key Value

Document Fees
INR 840 /-
EMD
INR 28000.0 /-
Tender Value
INR 13.87 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail