Tender For Lathe Fabrication And Ms Specials Work In Section Jen Under Sub Division Bandikui, bandikui-Rajasthan

Tender For Lathe Fabrication And Ms Specials Work In Section Jen Under Sub Division Bandikui-- 1 Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concerns store own his cost. 2 80 mm dia 3 100 mm dia 4 125 mm dia 5 150 mm dia 6 200 mm dia 7 250 mm dia 8 300 mm dia 9 Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concerns store own his cost. 10 32 mm 11 50 mm 12 Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department 13 32 mm 14 40 mm 15 50 mm 16 65 mm 17 80 mm 18 100 mm 19 150 mm 20 Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job. 21 At Workshop 22 On Site 23 Providing, Fabrication of Mild SteelPlane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect. 24 Supplying and fixing of MS Rods for different sizes of sluice valveand should be supplied as according to size of old rods including material and finishing for the following sizes. 25 Sluice Valve Size 80mm 26 Sluice Valve Size 100mm 27 Sluice Valve Size 125mm 28 Sluice Valve Size 150mm 29 Sluice Valve Size 200mm 30 Sluice Valve Size 250mm 31 Sluice Valve Size 300mm 32 Supplying of Chuck Nut for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes. 33 Sluice Valve Size 80mm 34 Sluice Valve Size 100mm 35 Sluice Valve Size 125mm 36 Sluice Valve Size 150mm 37 Sluice Valve Size 200mm 38 Sluice Valve Size 250mm 39 Sluice Valve Size 300mm 40 Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes. 41 Sluice Valve Size 80mm 42 Sluice Valve Size 100mm 43 Sluice Valve Size 125mm 44 Sluice Valve Size 150mm 45 Sluice Valve Size 200mm 46 Sluice Valve Size 250mm 47 Sluice Valve Size 300mm 48 Supplying ofMS Rods and Chuck Nut (Complete Set) for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes. 49 Sluice Valve Size 80mm 50 Sluice Valve Size 100mm 51 Sluice Valve Size 125mm 52 Sluice Valve Size 150mm 53 Sluice Valve Size 200mm 54 Sluice Valve Size 250mm 55 Sluice Valve Size 300mm 56 Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D)including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm).2 dia. Size (50 mm)

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	24-02-2025	date corrigendum	Date	06-03-2025

INR 500 /-

INR 9800.0 /-

INR 4.90 Lakhs /-