Tender For Khoud Milkkhanam Mursaina To Azimnagar Road - Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Including all T&P, Labour, Material, Royalty Tax but excluding GST) 2 Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401.(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 4 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 5 Providing and applying primer coat of Low Porosity with Bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70 Kg/Sqm using mechanical means as per Technical Specification Clause 502.(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 6 Providing and applying tack coat with VG-10 using bitumen distributor at the rate of 0.25 kg per sqm on the prepared granular surfaces treated with primer/Bituminous surface as per Technical Specification Clause 503.(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 7 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 to required line, grade and level to serve as wearing course on a previously prepared base by manual means, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 508 (By Manual Means)(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 8 Providing and layingType C seal coat by manual means with VG-10 sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall as per Technical Specification Clause 510( By Manual Means)(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 9 Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 10 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 R.C.C grade M 10(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 11 Laying Reinforced cement concrete pipe NP3/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2.(Including all T&P, Labour, Material, Royalty Tax but excluding GST) 12 Brick Masonry Work in cement mortar (1:4 cement & coarse sand) in foundation of Head walls complete exculding pointing and plastering as per drawing and technical specification Clause 600,1202 & 1203 (Including all T&P, Labour, Material, Royalty Tax but excluding GST) 13 Pointing with Cement Mortar (1:3) on brickwork as per technical specification Clause 613.3 & 1204 (Including all T&P, Labour, Material, Royalty Tax but excluding GST)
