Tender For Road Signage Work On Major District Roads Other District Roads Urban Roads In Jhansi District - Supply, Fixing & Eraction Of Built Up Cantilever Structure 6M Span Comprising Of One Vertical Post Of 6.00M Height Made Up Of 300 Mm Nb Heavy Class , jhansi-Uttar Pradesh

Tender For Road Signage Work On Major District Roads Other District Roads Urban Roads In Jhansi District - Supply, fixing & eraction of built up Cantilever structure 6m span comprising of one vertical post of 6.00m height made up of 300 mm NB heavy class MS pipe as vertical memver welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure disign & drawing with one fo steel primer and two costs of syntheitc enarnel plant. The work inculdes condtruction of RCC founcation of size 90*90M of requrired depth as per site condition for built up structure including Earth work in ecxcavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinformcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevent clauses of MORT&H specificatio section 800 and IRC 67 2010 complete in all respect. The Rates shall include cost of design fabrication, supply, transporatioin Local shifting Erection of Signage structure using crane, inclusive of all T&P machine, material and labore reuired ofr proper completion of work as per direction of Engineer-in-Charge. (Excluding cost of GST). 2 Providing & fixing of Reflective signs with a corrosion resistant 3mm thick aluminium composite face to be fully covered with High Intensity prismatic sheeling type XI as per IRC-67:2010 reflective sheeling with MS angle frame of 35x3. (Excluding cost of GST). 3 TRAFFIC SIGNS - SINGLE CHEVRON (SIGN BOARD) Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to th ground by means of properly designed foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. (Excluding cost of GST). 4 Retro-reflectorised Traffic sign as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate fo having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner remova, adhesion, impact resistance, specular floss adn fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International / Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should be obtained from Indian conditon within 3 years of launching of product by the manufacture in abroad, Alternatively, a certificate conforming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so dedires, could seek for a performance guarentee which be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67-2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7. Proof of the same in form of government report shall be uploaded while quoting tender. (As per LKO SOR SI No-18, P-57)60 cm Circular with diffinitation plate (20cm X 60cm) Speed limit (Excluding cost of GST). 5 60 cm equilateral triangle with definition plate (20cm X 60cm)(Excluding cost of GST). 6 45X90 cm (Left/Right) Two Way (Excluding cost of GST). 7 60 mm x 45 mm rectangular with diffinitation plate (20cm X 60cm). (Excluding cost of GST). 8 Stop Sign (Excluding cost of GST).

INR 860 /-

INR 100000.0 /-

Refer document