|
| 1 | Rig |
| 2 | Drilling and boring pilot hole in any soil strata by deep drilling / high power rig, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the pilot hole properly as per specification [(IS: 2800) (part-I)] and direction of the Engineer-in-charge.A. With contractor\"s high power rig |
| 3 | I) Up to 250 mtr.i) 320 mm dia |
| 4 | II. Beyond 250 mtr. and up to 375 mtr.i) 320 mm dia. |
| 5 | III. Beyond 375 mtr. and up to 500 mtr.i) 320 mm dia. |
| 6 | IV. Beyond 500 mtr. i) 320 mm dia. |
| 7 | Reaming of pilot hole to an enlarged bore hole in any soil strata by deep drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly as per specification (IS:2800)(part-I)] and direction of the Engineer-in-charge.A. With contractor\"s high power rig |
| 8 | I) Up to 250 mtr.i) From 320 mm dia. pilot hole to 550 mm bore hole. |
| 9 | ii) From 320 mm dia. pilot hole to 460 mm bore hole. |
| 10 | II) Beyond 250 mtr. and up to 375 mtr.i) From 320 mm dia. pilot hole to 460 mm bore hole |
| 11 | III) Beyond 375 mtr. and up to 500 mtr.i) From 320 mm dia. pilot hole to 460 mm bore hole |
| 12 | IV) Beyond 500 mtr.i) From 320 mm dia. pilot hole to 460 mm bore hole |
| 13 | Washing of enlarged bore hole of 460 - 550 mm dia. in any soil strata by deep drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly including lifting of drill pipes as per specification [(IS:2800)(part-I)] and direction of the Engineer-in-charge.A. With contractor\"s high power rig |
| 14 | Providing and Lowering of ERW pipe conforming to IS : 3589-2001(with latest revision) with deep drilling rig including painting with anti-corrosive bitumastic paints, fixing of M.S. ring, welding of all joints etc. complete after washing of the bore hole as per specification [(IS:2800)(part-I)] and direction of the Engineer-in-charge.A. With contractor\"s high power rig |
| 15 | i) 300 mm dia. ERW housing pipes. |
| 16 | ii) 200 mm dia. ERW blind pipes. |
| 17 | iii) 200 mm dia. ERW slotted pipes. |
| 18 | Providing and fixing of bail plug (made with 8 mm thick MS sheet) by welding with blind pipe including applying of anti-corrosive bitumastic paint as per specification [(IS:2800)(part-I)] and direction of the Engineer-in-charge.i) For 200 mm dia. ERW pipes |
| 19 | roviding and fixing of reducing socket (made with 8 mm thick MS sheet) by welding with blind pipe including applying of anti-corrosive bitumastic paint as per specification [(IS:2800)(part-I)] and direction of the Engineer - in - charge.A. With contractor\"s high power rigi) 300 X 200 mm dia. |
| 20 | Providing & Shrouding of the deep tube well assembly with washed pea gravels (2.0-4.75 mm effective size) as per specification (IS:4097) using deep drilling rig and direction of the Engineer-in-charge. A. With contractor\"s high power rig |
| 21 | (i) With pea gravels obtained from Durgapur, West Bengal. |
| 22 | With pea gravels obtained from Golaghat, Assam. |
| 23 | Providing and fixing of housing clamp (made with 12 mm thick MS sheet) by welding with blind pipe including applying of anti-corrosive bitumastic paint as per specification [(IS:2800) (part-I)] and direction of the Engineer - in - charge. |
| 24 | i) 300 mm dia. |
| 25 | ii) 200 mm dia. |
| 26 | Washing and development of tube well by using air compressor and testing of the well as per specification (IS: 11189) and direction of the Engineer-in-charge.A. With contractor\"sair compressor |
| 27 | i) Using air compressor of 300- 450 cfm output for DTW (Upto 200 mtr. pipe assembly) |
| 28 | ii) Using air compressor of 1100 cfm output for DTW (beyond 200 mtr. pipe assembly) |
| 29 | Providing and fixing of well cap (made with 8 mm thick MS sheet) by welding with blind pipe including applying of anti-corrosive bitumastic paint as per specification [(IS:2800 (part-I)] and direction of the Engineer-in-charge. |
| 30 | i) For 300 mm dia. ERW pipes. |
| 31 | ii) For 200 mm dia. ERW pipes. |
| 32 | Charges for electro-logging for ground water exploration related to potable drinking water purpose bore well (200-550 mm dia.) using a microprocessor based digital multiprobe bore well logger and submission of acquired data in the shape of numerical as well as graphical and determination of lithologgy and static graphic co-relation of aquifer, effective porosity and permeability,location of water bearing and saturated water zone and its corresponding discharge and also guidance for setting up of tapping zone etc. complete as per direction of the Engineer-in-charge (all necessary equipments relating to electro-logging should have to be arranged by the agency) |
| 33 | (i) BGL upto 250.00 mtr. |
| 34 | (ii) BGL beyond 250.00 mtr and upto 457.00 mtr. |
| 35 | (ii) BGL beyond 457.00 mtr and upto 600.00 mtr. |
| 36 | Providing and filling of the abandoned pilot hole of deep tube well with available materials obtained from pilot hole/sand/earth/any other suitable materials as per specification and direction of the Engineer-in-charge.(i) with available materials obtained from pilot hole (50%) and sandy earth (50%) |
