Tender For Rate Contract For Replacement Of Old And Ineffcient Submersible Pump Set Under Sub Div Rural Ii Nokha - Supply & Installation of 3 phase ISI marked submersible motor pump set offive star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. 2 7.5 KW (10 HP) & head up to 120 mtr. 3 7.5 KW (10 HP) & head above 120 mtr. 4 9.3 KW (12.5 HP) & head up to 120 mtr. 5 9.3KW (12.5 HP) & head above 120 mtr. 6 11 KW (15 HP) & head up to 120 mtr. 7 11 KW (15 HP) & head above 120 mtr. 8 13 KW (17.5 HP) & head up to 120 mtr. 9 13 KW (17.5 HP) & head above 120 mtr. 10 15 KW (20 HP) and above, head up to 120 mtr. 11 15 KW (20 HP) and above, head above 120 mtr. 12 S&F of star delta starter with MCB, Main and aux contactor, O/L relay, L/R selector switch, 3 indicating lamps, start-stop push button, control mcb with pannel with all accessories with following rating 13 11 KW 14 15 KW 15 18.5 KW 16 Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay,ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM).All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18 and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. 17 Above 10 HP and up to 15 HP 18 Above 15 HP and up to 20 HP 19 Above 20 HP and up to 30 HP 20 Supply & Fixing of ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980including making connection etc. 21 3 core 6.0 Sq.mm 22 3 core 10.0 Sq.mm 23 Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 24 25.0 Sq.mm, 3.5 core 25 35.0 Sq.mm, 3.5 core 26 Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesstraight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside,Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steelInsertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 27 80 mm HW 28 100 mm HW 29 150 mm HW 30 Providing & Fixing of double flanged, CI body, ISI marked NRV of approved make of following sizes 31 65 mm dia 32 Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 33 65 mm dia
