|
| 1 | EROSION PRONE GUARD WITH CLAMPAS PER DRAWINGNO.WBPDCL/BKTPP/BM-II/17;STAGE-II;01SET=01 NOGUARD + 02 NOS CLAMP# FOR ECONOMISERTUBE(OD:44.5 MM);90 DEG.BEND,TY |
| 2 | TUBE GUARD TH2.5,SS304 FOR TUBE OD76.1 # # FOR SCREEN TUBEAdditional Data:Straight tube gaurd for screen tube, Semicircular in crosssection, ID-77mm, Thk-2.5 mm, Length- 1000mm, Material-SS304 |
| 3 | TUBE GUARD TH2.5,SS304 FOR TUBE OD44.5 #Additional Data:Straight tube gaurd for steam cool wall tube, Circular in crosssection,height from centre-15mm, ID-40mm, Thk-2.5 mm,Length- 500mm, Material-SS304 |
| 4 | TUBE GUARD TH2.5,SS304 FOR TUBE OD63.5 #Additional Data:Straight tube gaurd for furnace tube, semi-circular in crosssection, ID-65mm, Thk-2.5 mm, Length- 1000mm,Material-SS304 |
| 5 | U-CLAMP FOR FINAL SUPER HEATEROF UNIT#4&5 AS PER DRG NOWBPDCL/BKTPP/BM-II/46.RNAdditional Data:Unit-4 OH 2025 |
| 6 | WASHER SIZE-OD70 MMXI.D34 MMXTH.7MM FORECONOMISER COIL HANGER PIN OF BOILER STAGEMATERIAL- EN-24 |
| 7 | HANGER PIN WITH WASHER,MATERIAL-EN-24 FORECONOMISER COIL HANGER OF BOILER STAGE-IONE SET CONSISTS OF ONE HANGER PIN(SIZE-32 MM.DIA.X100 MM LENGTH)+ TWO WASHERS(SIZE-OD70MMXI.D34 MMXTH.7MM),MATERIAL-EN-24 |
| 8 | SEALING NET #MATERAIL-SS-304,MESH SIZE-8MMX8 MM,WIRE DIA.-1MM,STANDARD WIDTH-4 FT# FOR BOILER PRESSUREPARTS |
| 9 | WIRE MESH #WIRE DIA.-3 MM,GRIT SIZE:50X50 MM,MATERIAL-MS#FOR BOILER PRESSURE PARTS REFRACTORYREINFORCEM |
| 10 | PLATE,MATERIAL:EN-8 #THICKNESS-6 MM,WIDTH-25 MM,MINIMUM LENGTH-1M# FOR LTSH & ECONOMIZER PANEL |
| 11 | ROD,CIRCULAR CROSS SECTION,OD10X1000L MMMATERIAL-MS |
| 12 | ROD,CIRCULAR CROSS SECTION,OD4X1000L MMFOR MATERIAL-MS |
| 13 | MS ROD,DIA:8MM |
| 14 | NET OF 5 MM SS WIRE FOR BAH TROUGH SEAL FORBOILER BAH TROUGH SEALLENGTH-1800 MM,WIDTH-350 MM,SEIVE SIZE-14X14 MM,WIRE DIA-5 MM,MOC:SS-304.RN |
| 15 | RE-HEATER MALE FOR BOILER#Additional Data:Reheater male with female support |
| 16 | M.S. FLATS, 65 X 12MM #Additional Data:Make- Sail/Tata/Jindal |
| 17 | CAP SKETCH NO.-WBPDCL/BKTPP/BM/171FOR SCREEN TUBE |
| 18 | CAP FOR WATER WALL TUBEOF UNIT#4&5 AS PER DRG NO WBPDCL/BKTPP/BM/36.RN |
| 19 | CAP,SKETCH NO.-WBPDCL/BKTPP/BM/114FOR LTSH & ECONOMISER TUBE |
| 20 | DRIVING ROLLER PIN WITH NUT,WASHER,BUSH FOR36\" GRAVIMETRIC COAL FEEDERAS PER SKETCH NO.- WBPDCL/ BKTPP/BM/203 |
| 21 | FLEXIBLE CONNECTOR FEMALE ## FOR PLSH OF BOILER |
| 22 | FLEX CONCTR (MALE) FOR PLSH OF BOILERDRG NO.-WBPDCL/BKTPP/BMFOR PLATEN SH OF BOILER |
| 23 | GUARD SKETCH NO.-WBPDCL/BKTPP/BM/110FOR ECONOMISER TUBE,Additional Data:Unit-4 OH 2025 |
| 24 | EROSION PRONE GUARD WITH CLAMPSTAGE-II;AS PER DRAWINGNO.WBPDCL/BKTPP/BM-II/16;1SET=01 NO GUARD + 02NOS CLAMP# FOR ECONOMISE TUBE(OD:44.5 MM);90DEG.BEND,TYPAdditional Data:Unit-1 OH 2025 |
| 25 | PLATE THICKNESS-6 MM,WIDTH -10 MM ## FOR FURNACE WATER WALLAdditional Data:Unit-1,2,4 OH 2025 |
| 26 | CAP FOR LTSH TUBEOF UNIT# 4&5 AS PER DRG NOWBPDCL/BKTPP/BM/33.RN |
| 27 | Soot Blower Guide pipeAdditional Data:(size- OD- 98 mm X ID- 90 mm X Length- 140 mm),Material - SS-310 for Unit-4 OH.HSN:8486 |
| 28 | soot Blower guide pipeAdditional Data:(size- OD- 98 mm X ID- 90 mm X Length- 140 mm),Material - SS-310 for Unit-2 OH.HSN:8486 |
| 29 | Economiser support barAdditional Data:bar width- 30mm, thickness-6mm, Material-SA387 Gr12 cl2, (to be supplied in length of 3 metre)for Unit-1 OH HSN:9801 |
| 30 | Economiser support barAdditional Data:bar width- 30mm, thickness-6mm, Material-SA387 Gr12 cl2, (to be supplied in length of 3 metre) for Unit-2 OH HSN:9801 |
| 31 | BOILER,DIPPER PLATE # DRG NO.MM(BA)-I/34# FOR TOUGH SEALING OF BOILER,U#1,2,3&4 |
| 32 | Economiser U-clampAdditional Data:Support U clamp: 75 mm length x 6thk, material- SA387GR12,CL2Drawing Ref-ECOL/01 HSN:9801 |
| 33 | Economiser U-clampAdditional Data:Support U clamp: 75 mm length x 6thk, material- SA387GR12,CL2Drawing Ref-ECOL/01 HSN:9801 |
