}

Tender For Renowned Warrior Avanti Bais Gate Place Is Near Village Sijari On Mauranipur-Garautha Road - Excavation In Soil Mixed With Moorum/Shingle/Kankar Requiring The Use Of Special T&P Such As Pickaxes, Subbals Etc.Including Lift Upto 1.5 Metre (5 Ft, Jhansi-Uttar Pradesh

Rural Engineering Department has published Tender For Renowned Warrior Avanti Bais Gate Place Is Near Village Sijari On Mauranipur-Garautha Road - Excavation In Soil Mixed With Moorum/Shingle/Kankar Requiring The Use Of Special T&P Such As Pickaxes, Subbals Etc.Including Lift Upto 1.5 Metre (5 Ft. Submission Date for this Tender is 10-03-2025. Excavation Work Tenders in Jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

47725722
Tender For Renowned Warrior Avanti Bais Gate Place Is Near Village Sijari On Mauranipur-Garautha Road - Excavation In Soil Mixed With Moorum/Shingle/Kankar Requiring The Use Of Special T&P Such As Pickaxes, Subbals Etc.Including Lift Upto 1.5 Metre (5 Ft
Open Tender
Indian
Uttar Pradesh
Jhansi
10-03-2025

Tender Details

Tender For Renowned warrior Avanti Bais gate place is near village Sijari on Mauranipur-Garautha road - Excavation in soil mixed with moorum/shingle/kankar requiring the use of special T&P such as pickaxes, subbals etc.including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.Si. No.-252 pg-36 2 Cement concrete with 4 cm.gauge approved stone ballast, approved coarse sand and cement in the proportion of 8 : 4 : I including supply of all materials, labour and T & P etc. required for proper completion of the work. S.i no-281 Pg-38 3 R.C.C work with cement approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in footing of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour& T&P etc. required for proper completion of the work. Binding wire cost being included. 4 R.C.C work with cement approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in coloum of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour& T&P etc. required for proper completion of the work. Binding wire cost being included in the item. As in Item no.288(1st) 5 R.C.C work with cement approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in lighter beam of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour& T&P etc. required for proper completion of the work. Binding wire cost being included in the item. As in Item no.285(1) 6 R.C.C work with cement approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in slab excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour& T&P etc. required for proper completion of the work. Binding wire cost being included in the item. 7 First class brick work in 1:6 cement and fine sand of 1.25 FM. mortar in super structure and plinth and above including supply of all materials, labour and T & P etc. required for proper completion of the work.303+309 8 Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & overlapping & hooks. 9 12 mm Cement plaster in 1:4single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extra for mixing any additive.Si no-17.58(iii) 10 providing and applying white cement based putty of average thickness 1mm, of apporved brand and manufacturer, over the plastered wall surface to prepare even and smooth complete. S.I. (13.8) 11 Finishing walls with water proofing cement paint of approved make & quality on new work with three coat to give to give an even shade including supply of all materails labour and T&P etc. Requried for proper completion of work.(S.I. No. 660+661) . Page No. 46 12 Supply and fixing of 80 mm thick precost cement concrete block pavement 13 Earth work cutting or filling including all complete For Service Road 14 Construction of granular sub base by providing well graded material, spriding in uniform layers with motor grader on prepared surface mixing by mix in place method with roatvetor at OMC .and compacting with smooth wheel roaller to achieve the desiersd density, complet as per technical specification Clause 401 15 Providing, laying spreading and compacting stone aggregates of specific sizes to water bound macadom specification including spreading in uniform thickness hand packing, rolling with smooth wheel roller 80 - 100 KN in stages to proper grade and camber, apploying and brooming, stone screening to fillup the interstices of coarse aggregate, watering and compacting to the required density .Grading 3 as per technical specification class 405 16 Black granite polished in big slab S.I. 18IV+S.I. No. 14.81 Page No. 10 (2600+273=2873.00) 17 supply and fixing Sign board complete 18 Wiring point for Light with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit pipe cancealed in the wall complete as earthwire drawn inside the conduit with modular type switch . Including all materials , labour T&P etc required for proper complition of work. SI 131 C + 187 C 19 Wiring point for Plug with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit pipe cancealed in the wall complete as earthwire drawn inside the conduit with modular type switch . Including all materials , labour T&P etc required for proper complition of work. SI 134 C + 187 C 20 S/F ofPower Plug with 20A/250Volt flush typemodular switch and 5 pin 20A/250V flush type universal modular socket switch on concealed M.S. box . Including all materials , labour T&P etc required for proper complition of work. SI 1139 A 21 Supply andWiring of Submain with two number 2.5 sq mm FRLSH PVC insulated 1100 V grade multi strand (M/S) single corecopper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduitconcealed in wall complete in all respect. Including all materials , labour T&P etc required for proper complition of work. SI 1304 C 22 S/F of 6 Amp to 32 Amp SPMCB (10KA) C curvecomplete in all respect. Including all materials , labour T&P etc required for proper complition of work. SI 1002 ,CAT B 23 S/F ofLED Light with metal heavy duty box type batten light fitting 1x22Watt suitable for up to 1x22 watt LED Polycabonate tube light complete including tube complete in all respect. Including all materials , labour T&P etc required for proper complition of work. SI 1413 CAT - AA 24 S/F of Surface / flush mounting4 way SPN Distribution board with additional metal door without MCB (Miniature Circuit Breaker) complete in all respect. Including all materials , labour T&P etc required for proper complition of work. SI 1025 A ,CAT A

Key Value

Document Fees
INR 2354 /-
EMD
INR 83000.0 /-
Tender Value
INR 16.55 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail