Tender For Maintenance And Renovation Of Existing Canteen - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil 3 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with: 4 Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 5 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below 6 Brick work with concrete solid bricks of class designation in superstructure above plinth level up to floor V level in all shapes and sizes in :6.4.1 Cement mortar 1:4(1 cement : 4 coarse sand) 7 Supplying and fixing Steel doors with window frames using good quality steel for work area opening including all cost of materials and labour charges conveyance etc.. Complete. 8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(plinth beam) 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) 9 Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). (Lintel) 10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Mild steel and Medium Tensile steel bars 11 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers (For Plinth beam) 12 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers(For Lintel) 13 Providing G.I. sheet roofing including squre pipe with painting including all cost of materials and labour charges conveyance etc..complete. 14 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 15 12mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) 16 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 17 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with igment of matchingshade complete. 18 grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-Charge. size of tile 600x600 mm 19 Providing the false ceiling work in dining hall,gust room and wash area ceiling in using PVC board with steel with painting including all materials and labour charges conveyance etc..complete 20 new work (two or more coats) with a base coat of whiting 21 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer 22 wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: two or more coats on new work 23 painting steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 24 Electrification charges including all cost of materials and labour charges conveyance etc. complete 25 Water supply management works required sanitary itoms, plumbing itoms, septic tank, waste disposal pit including all cost of materials and labour charges conveyance etc. complete 26 Miscellaneous and unforeseen items 27 Door, Window & Ventilator in steel Frame and Shutter work Including all fittings, in wet area with PVC doors, accessories and fitting charge etc includes. 28 Entry door 29 Ordinarory door 30 Loby door 31 Glass door 32 Window 3
