Miscellaneous Civil Work At Bzduss Ltd., Bhilwara - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 2007 onde) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/e fixing the pipe with clamps at I metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 20mm nominal size 25 mm nominal size P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality/make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Plain Toe 110mm dia P&F rigid PVC pipe fittings (15: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87,5 110mm dia Carriage Of Material Earth, Sand, Lime, Morrum manure or sludgel Km Lead Providing and laying in position cerment concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar): 6 (1 cement: 6 coarse sand) Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & 15:15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 600mm x 1200mm Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement: 3 coarse sand) jointing with white cement mortar 1:2 (1white cement: 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Rajasthan Black Above 3601 Cm2 Slabs Providing and fixing factory made of uPVC Extruded section having an overall dimension as below (tolerance+/-Imm) with wall thickness 2.0mm+/-0.2mm,corners of the door frame to be mitred and welded of plastic galvanized brackets and stain less steel screws. The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19x19mm and 1mm+/-0.1mm wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge. Extruded section profile size 42x50 mm Providing and fixing to existing door frames 30mm thick factory made polyvinyl chloride (PVC) door shutter made of stiles and rails of a uPVC hollow section of size 60x30 min and wall thickness 2mın +0.2mm with inbuilt decorative moulding edging on one side. The stiles and rails mitred and joined and the corners by means of M.S.galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0mmand stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 25x20 mm and Imm +/- 0.1mm wall thickness. The lock rail made up of H section, a uPVC hollow section of size 100x30 mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means of plastic/galvanized M.S.tube U cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 610mm,having overall thickness of 20mm and 1mm+/- 0.1mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers.complete as ner manufacturers. Wiring of light point/ fan point/exhaust fan point/call bell point with 1.5 sq mm nominal size FR PVC Insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC Insulated unsheathed flexible copper earth conductor 1.1 kV grade (15:694) in recessed 15 marked MMS 15:55:37 P-III) virgin material PVC conduit & its ISI marked (15:3419-1988) accessories, round tiles, 1.2 mm thick Hat Dipped Galvanized Modular Box with earth terminal, 204 Modufar switch, Modular face plate with grid plate, 3 pin ceiling rose/Holder 13 way connector, screws, making connections, Testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical Wiring accessories refer Chapter E-04, E-05 & E-07 For additional technical parameters of product/work refor Annexure A attached with this BSR Short point (up to 3 mtr.) Medium point (up to 6 mitr Long point (up to 10 mtr. Wiring of 3/5 pin 6 amp. Ught plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC Insulated unsheathed flexible copper sarth conductor 1.1 kV grade 15:694) in recessed 151 marked MMS ( 15:9537 PIII) PVC conduit & its 15 marked (15:3419-1988)accessories, Hot Dipped Galvaniased Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A moduler socket, Modular face plate with grid plate, screws. making connections, testing etc. as required For specification of copper Conductor, Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E-04, E-058E-07 For additional technical parameters of product/work nefer Annexure A attached with this RSR On board Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular bos of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of 151 marked modutar 16 amp. Switch (5:3854) and 6/16 amp. socket outlet (15:1293) making connection, testing etc as required. For specification of Wiring accessories refer Chapter E-07 related item & For additional technical parameters of product wark refer Annexure A attached with this BS Providing & Fixing of B Star nated copper wounded double hall bearing capacitor start, sluminum body Metallic blade ceiling fan Conforming to sil the performance requirements laid down in 15 374:2018 including all amendments, as spplicabile & Carry B licensing marking) with down rad up to 80 cm with secondary support safety cable steel roped cotter pin with 3x15 sqmm pvc insulated flexible copper conductor making connection heating s required. Al as per gre approved by Engineer in charge. For additional technical parameters of products/ work nefer Annexure A attached with this BSR 1200 mm Sweep BEE 3 Star rated (ervice value501x5.5) Providing & Fixing of IP 20 box made out frum 1.2mm thick CRCA sheet steel with depth of miniman 30 mm and finished with powder coating and suitable for mounting LED tube including side covers, holders, intermal wiring to illuminate the single sided connection LED tube. (Without tube). All as per pre approved by Engineer in charge For additional technicul parameters of products work tofer Annexure A attachod with this BSR Suitable for 4 LED The shape fisturs for single rod Providing & Fixing of modular type 120 W Step Fan regulator duly 151 marked (15 11037:1984) wit CM/L no: printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating, including all as per pre approved by Engineer in charge, making connections, testing etc as required. For additional technical parameters of product/work refer Annexure A attached with this BSR 5 step fan regulator 2 Module 360 digree rotating Providing & Fixing of -20 LED Res/Surface Mourtai Round/Sqaure SMD Mid Power LED Downlight with power coxied die-cast aluminum hasing with UV Stabilond non whiff with 15 compense 2.5 V surge protected brated driver, with Short & Open croat protection, having efficiency 85% System Liemen efficacy fr 330 Im/watt, THD 10%, 2025, сад,e of mininum 50000 Barning Hours with, 70% of intl Lumen mainated the CCT 3000/4000K/ 5700 6000/500 ANSI masimum power consumption should not more than the specified rating and Mixture shall be of 15 staredaril and trade mark certif TCA Manufactur Word Mark Name Trave Embossing Screen rinting on houting OEM must have t own in house NABE last for al testing facilities for LEO atures M79 & UMBC) cartficate/Report bor DM shu beste. All as per pre approved by Engtreer in things For additional technical parameters of productth rats an washers.complete as per manufacturers spectation and direction of eng Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/C/D tripping characteristic as per type of load and sita requirement) 4 KV impulse withstand voltage, 151 marked 15 8828(1996)/conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as por IEC, minimum phase termination capacity of 35sq.mm., conductor line load reversibility, IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 opto 20 A rating and 10,000 upite 63 A, 5000 for 80 A & above rating including making connections, testing etc, as required. DEM shall have submit NABL/CPRI/ERDA accrediated lab type tast reports & All as per pre approved by Engineer in charge For additional technical parameters of product/work refer Annexure A attached with this BSR Single pole MCB (With B/C) curve tripping Characteristics) Providing & Fixing of 240/415 V isolator S marked 15:13947-400/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV Impulse withstand voltage, true contact indication, Red colour dolly/lever shall have single mould covering over all poles for operation two position din rail mounting, minimum phase termination capacity of 35sq.mm. IP 20 contact protection and fitted in existing distribution board sheet including making connections, testing etc. as required, OEM shall have submit NABI/CPRI ERDA accrediated lab type tast reports & All as per pre approved by Engineer in charge. For additional technical parameters of product/work rafer Annexure A attached with this BSR Double pole isolator 63 A rating 6 A to 32 A rating Demolishing cement concrete manually by mechanical means including disposal of material within 50 metres lead se per direction of Engineer in-sharge 1:3:6 or richer mis Earth work in excavation by mechanical (Hydraulic Excavator y manual means in foundation wenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of hotzar, lill in 1.5 π. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplas excavated soil s directed with in a lead of 50 meter. All kinds of oils Providing and laying in position cement concrete including curing, compaction complete in specifiest grade excluding the end of cernering and shuttering All work up to plinth level. 141cm graced stone aggregate 40 mm nominal size Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix/Design Mix Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation footings, strap beam, raft, bases of columns etc. Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code)
