}

Tender For , Work Of Conversion Of Regional To Piped Wss Bansroli To Provide Fhtcs Including One Year Defect Liability Period Under Tehsil Bayana Under Jjm In The Jurisdiction Of Phed Division Bayana Distt. Bharatpur. Work Of Conversion Of Regional To Pip, bayana-Rajasthan

Public Health Engineering Department has published Tender For , Work Of Conversion Of Regional To Piped Wss Bansroli To Provide Fhtcs Including One Year Defect Liability Period Under Tehsil Bayana Under Jjm In The Jurisdiction Of Phed Division Bayana Distt. Bharatpur. Work Of Conversion Of Regional To Pip. Submission Date for this Tender is 20-02-2025. Water Supply Project Tenders in bayana Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

47691900
Tender For , Work Of Conversion Of Regional To Piped Wss Bansroli To Provide Fhtcs Including One Year Defect Liability Period Under Tehsil Bayana Under Jjm In The Jurisdiction Of Phed Division Bayana Distt. Bharatpur. Work Of Conversion Of Regional To Pip
Open Tender
Indian
Rajasthan
Bayana
20-02-2025

Tender Details

Tender For , Work Of Conversion Of Regional To Piped Wss Bansroli To Provide Fhtcs Including One Year Defect Liability Period Under Tehsil Bayana Under Jjm In The Jurisdiction Of Phed Division Bayana Distt. Bharatpur. Work Of Conversion Of Regional To Piped Wss Bansroli To Provide Fhtcs Including One Year Defect Liability Period Under Tehsil Bayana Under Jjm In The Jurisdiction Of Phed Division Bayana Distt. Bharatpur. - 1 Costruction and commissioning of tube well 2 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. 3 Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 4064/1 or amended upto date of approved make including cost of all material andlabouras per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia.65 mm dia 4 Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg.including all jointing material as per specification with safety cover. 5 Provision for P,L,J of Rising Main with Earth work, valve chamber 6 Providing, supplying, lowering & laying in standard lengths HDPE PE-80PN-6 Pipes conforming to IS- 4984: 1995 with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flangec joint and specials jointing pipe by butt fusion welding method, including all taxes (Centraland local) transportationand freight charges, inspection charges loading/ unloading charges, stacking the same in closec shade duly protecting from sunrays and rains, including cost of labour and material,specials (Tee, bend etc satisfactory, hydraulic testing etc. complete as pei technical specifications and direction of Engineer-in- charge, (excluding earth work) (supply upto 90 mm dia coil & above 90mm dia straight length in 6 M.)Note: Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.90 MM HDPE PE80 P10 7 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter.All kinds of soil 90 mm HDPE 8 Provision for P,L,J of distribution pipe line with Earth work, valve chamber 9 Providing, supplying, lowering & laying in standard lengths HDPE PE-80PN-6 Pipes conforming to IS- 4984: 1995 with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flangec joint and specials jointing pipe by butt fusion welding method, including all taxes (Centraland local) transportationand freight charges, inspection charges loading/ unloading charges, stacking the same in closec shade duly protecting from sunrays and rains, including cost of labour and material,specials (Tee, bend etc satisfactory, hydraulic testing etc. complete as pei technical specifications and direction of Engineer-in- charge, (excluding earth work) (supply upto 90 mm dia coil & above 90mm dia straight length in 6 M.)Note: Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 10 75 MM HDPE PE80 PN6 11 90 MM HDPE PE80 PN6 12 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter.All kinds of soil up to 125 mm HDPE 13 Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesof approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitablesupport structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 14 80 mm 15 100 mm 16 Road Repair 17 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 18 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 19 FHTC 20 Providing service connection as per technical specification and standard drawing as per relevant IS code (amenued up to date) from all kind of water mains up to con*rmer meter premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishingof cement concrete,WBM, J3lack top etc. of all thickness; cutting of CC road/jhiri by using a concretC Glitter machine; dcpositirg and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitti::g duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS/PVC clamp with saddle piece, gunmetal ferrule 4.0 mm (ISI make) , valve (IS: 778) and specials with MDPE pipG PE 80 PN 12.5 as per ISO 4427 below ground level and P&F Gl pipe 15 mm dia class B (ISI mark) above ground level in the premises for fixing tap ( max. lengt2.0 mtr),PDF a 15 mmBib cock with foam flow chrome plated with compl te brass body including brass handle having good quality with wt 300 to 325 gm ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect ink luding labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer!s property in such a v ay that it should be accessible for inspection to VWSC, PHED and any or hGr authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in case of concrete/bitumin ›‹is roads where minimum depth shall be 20 cm.For detailed specifications, of MDPE pipes please refer section Technical Specifications of bid document. General specifications af MDPE pipes shall be,as under: • The raw material shall be virgin PE 80 Blue compt und and comply with the requirements of ISO/Directive of testing material :90i 0 with minimum required strength of 8 Kg/sq.cm.• The raw material shall be Food grade quality Pressure rating shall be 12.5 Bar. The pipes shall bear ISO marking.Average length up to 05 mtr 20 mm dia MDPE pipe a d 02 mtr 15 mm GI pipeclass B. 21 Data entry of exisying FHTC in rural area under JJM on website ejalshakti.gov.in; incudes visiting the vilage for collecting basic data consumers like i.e. Adhar no , ration card , voter ID , BPL card , PAN card, Driving licence, Passport, antyodaya card, mobile no etc.and entering the detail on above website. The cost also includes computer and operator.

Key Value

Document Fees
INR 1000 /-
EMD
INR 40300.0 /-
Tender Value
INR 20.15 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail