|
| 1 | GENERAL SUMMARY |
| 2 | \"The tenderer is advised to work out their own lump sum rate duly considering the quantity of old material and quantity of various items considered under schedule \"B\" \". |
| 3 | Lump sum price worked out by the contractor against Schedule ‘A’Part- I (BUILDING WORKS)for the following building works:- |
| 4 | (a) Lump sump amount worked out by the contractor for construction of sewage sump well of 4.00 metre dia and 7.50 metre depth complete all as specified and as shown on drawings. |
| 5 | (a) Lump sump amount worked out by the contractor for the construction of block of pump house building including ramp, platform etc as specified and shown in drawing Nos WD/BPL/18/2010, Sheet No. 1/1, CEBZ/TD/99/2010 , structural drawing, TD drawings, schedule of finishes, given specifications and as per quantities attached as SCHEDULE ‘A’ PART – I \"Appx-A\", etc complete all as specified and as directed. |
| 6 | Lump sum price worked out by the contractor for EXCAVATION ANDEARTH WORKas listed in Schedule ‘A’Part- II (Ref prepriced schedule attached seperately) |
| 7 | Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’Part- III (Ref prepriced schedule attached seperately) |
| 8 | Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’Part- IV (Ref prepriced schedule attached seperately) |
| 9 | Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’Part- V (Ref prepriced schedule attached seperately) |
| 10 | Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’Part- VI (Ref prepriced schedule attached seperately) |
| 11 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’Part- VII (Ref prepriced schedule attached seperately) |
| 12 | PRIME COST SUMProvide Prime cost sum for \"Design, supply erection, commissioning and testing of complete water supply automation system including cabling, instrument panel, motorized remote control valves, water level sensor and indicators, battery backup etc all as required and directed including earthing, civil work etc\" for Sch \"A\" Part-I Serial Item No.1 complete.(i)Add/deduct_________________%(Contractor to quote lumpsum amount which will be converted to percentage over/below)Note:- Amount quoted by the contractor shall not exceed 15% above the amount inserted in Col-6.however contractor may quote lower amount than inserted in Col-6.If contractor quotes amount more than 15% then it will be reduced/revised to 15% only. |
| 13 | SCH \"A\" Pt - VIII (MISCELLANEOUS PARTS) |
| 14 | S&F, Gun metal stop valve, half turn with lever arm, screwed both ends for iron pipe 20mm dia. |
| 15 | S&F, Stop valve, fancy, angular type, brass chromium plated, screwed down, high pressure, screwed both ends for iron pipe 15mm dia. |
| 16 | S&F brass chromium plated, shower rose of dia, not less than 50mm with swivel joints and arm length not than 150mm screwed for iron pipe 15mm dia. |
| 17 | Supply & laying in trenches, aligning and jointing of NP-2 class, RCC pipes 150 mm bore dia with socket & spigot ends, ISI Marked (IS-458), with rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of rubber gaskets, lubricants etc), testing of the sewer pipe line with water test (including cost and conveyence of water to site) etc complete as specified and directed. |
| 18 | Supply & laying in trenches, aligning and jointing of NP-2 class, RCC pipes 200 mm bore dia with socket & spigot ends, ISI Marked (IS-458), with rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of rubber gaskets, lubricants etc), testing of the sewer pipe line with water test (including cost and conveyence of water to site) etc complete as specified and directed. |
| 19 | Supply & laying in trenches, aligning and jointing of NP-2 class, RCC pipes 250 mm bore dia with socket & spigot ends, ISI Marked (IS-458), with rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of rubber gaskets, lubricants etc), testing of the sewer pipe line with water test (including cost and conveyence of water to site) etc complete as specified and directed. |
| 20 | Supply & laying in trenches, aligning and jointing of NP-2 class, RCC pipes 300 mm bore dia with socket & spigot ends, ISI Marked (IS-458), with rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of rubber gaskets, lubricants etc), testing of the sewer pipe line with water test (including cost and conveyence of water to site) etc complete as specified and directed. |
| 21 | Laying only in trenches, aligning and jointing of NP-2 class, RCC pipes 150 mm bore dia with socket & spigot ends, ISI Marked (IS-458), with rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of rubber gaskets, lubricants etc), testing of the sewer pipe line with water test (including cost and conveyence of water to site) etc complete as specified and directed. |
| 22 | Laying only in trenches, aligning and jointing of NP-2 class, RCC pipes 200 mm bore dia with socket & spigot ends, ISI Marked (IS-458), with rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of rubber gaskets, lubricants etc), testing of the sewer pipe line with water test (including cost and conveyence of water to site) etc complete as specified and directed. |
| 23 | Supply & laying in trenches, aligning and jointing of NP-2 class, RCC pipes 250 mm bore dia with socket & spigot ends, ISI Marked (IS-458), with rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of rubber gaskets, lubricants etc), testing of the sewer pipe line with water test (including cost and conveyence of water to site) etc complete as specified and directed. |
| 24 | Laying only in trenches, aligning and jointing of NP-2 class, RCC pipes 300 mm bore dia with socket & spigot ends, ISI Marked (IS-458), with rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of rubber gaskets, lubricants etc), testing of the sewer pipe line with water test (including cost and conveyence of water to site) etc complete as specified and directed. |
| 25 | M & L for preparation of newly plaster wall of over head tank including dome and soffits of any height surfaces & applying two coats of cement base paints over one coat of exterior wall primer complete all as specified and diirected |
| 26 | S & F roof trusses (framed), trusses, purlin, crane gantries, rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections) including distance pieces, cleats etc (welded/riveting) conforming to Fe-410-W (Gde-E250) quality \"A\" complete all as specified and directed. |
| 27 | M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces of any description, over 10cm in width or girth,not otherwise complete all as specifed and directed. |
| 28 | S & F mild steel plates plain, 5 mm thick for manhole cover plates complete all as specifed and directed. |
| 29 | S & F 32 mm GI pipe medium grade galvanised with all fittings and fixed complete all as specifed and directed. |
| 30 | S & F 25 mm GI pipe medium grade galvanised with all fittings and fixed complete all as specifed and directed. |
| 31 | M & L for hardcore of gauge n.exc 63 mm, with broken stone or boulders seposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specifed and directed |
| 32 | M & L 75 mm thick cement conceret 1:2:4 type B-2, using 40 mm graded stone aggregate complete all as specifed and directed |
| 33 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CMM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specifed and directed. |
| 34 | S & F exhuast fan electric single phase AC 240 Volts 50 Hz supply, heavy duty, corrosion resistant suitable for areas containing corrosive fumes, 450 mm weep siize 4 pole with louvers and connecting, including provision of 3 core bexible PVC insulated multi-stranded copper conductor of sign 0.50 Sqm from ceiling connector to fan complete all as specifed and directed. |
| 35 | S & F of MCB, 240V, breaking capacity 10 KA, with characteristic \"B\", 18-8828 marked, Single pole, 2/2.5 Amp complete all as specifed and directed |
| 36 | S & F of MCB, 240V, breaking capacity 10 KA, with characteristic \"B\", 18-8828 marked, Single pole, 5/6 Amp complete all as specifed and directed |
| 37 | Supply, lay, connecting and testing complete of ductile Iron pressure pipe (151 marked) (15-8329-2000, Reaffirmed-2005 Edition 4.1) of 200 mm bore with spigot and socket ends, suitable for push on joints in standard working lengths supplied with rubber gasket duly \"ISI marked for water, class-K-7 with camant mortar lining Inside and metalic zinc coating with finishing layer of bluminous paint on outside the pipe without polyethylene sleeve but including \"Push-on- joint supplied with \"151\" marked EPDM rubber gasket conforming to 15-5382-1985 (Reaffirmed-2003) with dual hardness of Type-2 (Bulb) and Type-5(Heel) quality complete all as specifed and directed. |
| 38 | Supply, lay, connecting and testing complete of ductile Iron pressure pipe (151 marked) (15-8329-2000, Reaffirmed-2005 Edition 4.1) of 150 mm bore with spigot and socket ends, suitable for push on joints in standard working lengths supplied with rubber gasket duly \"ISI marked for water, class-K-7 with camant mortar lining Inside and metalic zinc coating with finishing layer of bluminous paint on outside the pipe without polyethylene sleeve but including \"Push-on- joint supplied with \"151\" marked EPDM rubber gasket conforming to 15-5382-1985 (Reaffirmed-2003) with dual hardness of Type-2 (Bulb) and Type-5(Heel) quality complete all as specifed and directed. |
| 39 | Supply, lay, connecting and testing complete of ductile Iron pressure pipe (151 marked) (15-8329-2000, Reaffirmed-2005 Edition 4.1) of 100 mm bore with spigot and socket ends, suitable for push on joints in standard working lengths supplied with rubber gasket duly \"ISI marked for water, class-K-7 with camant mortar lining Inside and metalic zinc coating with finishing layer of bluminous paint on outside the pipe without polyethylene sleeve but including \"Push-on- joint supplied with \"151\" marked EPDM rubber gasket conforming to 15-5382-1985 (Reaffirmed-2003) with dual hardness of Type-2 (Bulb) and Type-5(Heel) quality complete all as specifed and directed. |
| 40 | Labour charges of laying only DI Pipe 250 mm dia class K-7 with spigot and socket ends complete all as specifed and directed. |
| 41 | Taking down the existing DI Pipe line 200 mm dia with fittings with spigot and socket ends and testing the serviceability of DI pipe lines and relaying with repairs the same location complete all as specifed and directed. |
| 42 | Labour charges of laying only DI Pipe 200 mm dia class K-7 with socket and spigot ends complete all as specifed and directed. |
| 43 | Taking down the existing DI Pipe line 150 mm dia with fittings with spigot and socket ends and testing the serviceability of DI pipe lines and relaying with repairs the same location complete all as specifed and directed. |
| 44 | Labour charges of laying only DI Pipe 150 mm dia class K-7 with socket and spigot ends complete all as specifed and directed. |
| 45 | Taking down the existing DI Pipe line 100 mm dia with fittings with spigot and socket ends and testing the serviceability of DI pipe lines and relaying with repairs the same location complete all as specifed and directed. |
| 46 | Labour charges of laying only DI Pipe 100 mm dia class K-7 with socket and spigot ends complete all as specifed and directed. |
| 47 | Supply, lay, connecting and testing complete of ductile iron pressure pipe fittings (ISI marked) (IS-9523-2000, Reaffinned-2003) with spigot and socket ends, suitable for push on joints, supplied with a rubber gasket duly ISI marked for water, gas and sewage suitable for DI pipe class-K-7 with cement mortar lining inside as per Annexure-C of IS-0623-2000 and metallic zinc coating with finishing layer of bituminous paint on outside the asing as per Annexure-C of IS-9523-2000 without polyethylene sleeve but including \"Push-on-joint\" supplied with ISI marked EPDM rubber gasket conforming toIS-5382-1985 (Reaffirmed-2003) with dual hardness of Type-2 (Bulb) and Type-5(Heel) quality complete all as specifed and directed. |
| 48 | Fixing onlyCI Reflux valve200 mm dia (NRV)of dismantling and testing, connecting and testing reflux valve with bypass arrangementandflanged ends drilled suitable for bore of pipe complete with nuts, bolts, washers, rubber gasket, etc complete all as specifed and directed. |
| 49 | Supplying, fixing and testing of CI reflux valve (NRV) (ISI Marked) with by pass arrangement suitable for 150mm dia Ranged joint complete with nuts, bolts and washers complete all as specifed and directed. |
| 50 | Fixing onlyCI Reflux valve150 nmm dia (NRV)of dismantling and testing, connecting and testing reflux valve with bypass arrangementandflanged ends drilled suitable for bore of pipe complete with nuts, bolts, washers, rubber gasket, etc complete all as specifed and directed. |
| 51 | Fixing only electric driven centrifugal pumpset 15 LPS, 45 M head comprising casing pump including dismantling the pump set and electric motor checking the servicebility, greasing , revarnishing and reassembling testing and commissioning complete all as specifed and directed. |
| 52 | Fixing only electric driven centrifugal pumpset 15 LPS, 35 M head comprising casing pump including dismantling the pump set and electric motor checking the servicebility, greasing , revarnishing and reassembling testing and commissioning complete all as specifed and directed. |
| 53 | Fixing and loweringonly electric driven vertical submersiblepumpset 15 LPS, 35 M headpump including dismantling the pump set and electric motor checking the servicebility, greasing ,and reassembling testing and commissioning complete all as specifed and directed. |
| 54 | Supplying, lowering and testing of Gl water tubing 80mm bore, heavy grade with and including all fittings long threaded heavy grade socket in length of 3 metre with leak proof jointing materials and jointing as column pipe, lowering in bore well all as required and complete all as specifed and directed at site |
| 55 | Supply and fixing holding power clamp 02 Nos on tube well for column pipe fabricated out of MS flat Iron 100X10mm made to shape, drilling with and Including nuts, bolts & washers etc complete all as specifed and directed. |
| 56 | Supplying, fixing and testing of cast iron reflux valve (NRV) sultable for 80mm dia flanged joint complete with nuts, bolts and washers complete all as specifed and directed. |
| 57 | Supplying, fixing and testing of slim seal butterfly Rs valve with iron wheel head, both ends flanged for Iron pipe and fixed complete with nuts, bolts and washers complete all as specified for 80mm complete all as specifed and directed. |
| 58 | S&F, Pressure gauge diaphragm type up to 10 Kg/Sqcm complete all as specifed and directed. |
| 59 | Installation, testing and commissioning only outdoor type, floor mounted, LT panel board, cubicle type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved copper bus bar of rating 200 Amps for phases and neutral installed on porcelain insulators after removing the existing rusted portion of MS sheet andduly powder coated painted, replacing the hinges and checking the serviceability of the completePanel board including making serviceable the existing in store panel and rewiring if any requirement of accessories to replacement testing , commissioingcomplete all as specified and directed. The panel shall be dust and vermin proof IP-54 class protection and made out of 3.15mm CRCA MS sheet and 40X40X6mm thick MS angle iron frame work, front opening type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including Internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS-694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sqmm and comprising of followingsNote: Cost required to make the LT panel serviceable shall deemed to be included in quoted rates by the contractor. |
| 60 | Item 9.46 contd/-...INCOMINGS(a) MCCB 415 Vol. 63 Amp, rating 4 Pole Service Breaking Capacity 25 KA-1 NoOUTGOINGS(b) MCCB 63 Amps, four pois, 415 voa, 25 KA nipturing capacity-01 No (Outgoing)(c) Digital 0-100 Amps, 96mm x 96mm Square dial flush type, ISI marked with selector switch 3way and current transformer -01 Set.(d) Digital 0-500 Amps, 96mm x 96mm Square dial flush type, ISI marked with rotary selecter switch 3way-01 Set.(e) Phase indicating LED lamps (R-Y-B) -01 Set(f) Supply & fixing of fully Automatic star delta starter suitable for submersible pump set mentioned in No 8.36 here-in-before completeunder voltage and overload protection. Single phase preventer and mounting in main electnc panel and also including necessary wiring with PVC insulated and unsheathed copper conductor cable multistranded of suitable size, concealed in light grade GI or fexible pipe all as spected and directed-01 No Each |
| 61 | Installation, testing and commissioning only Indoor type, floor mounted, LT panel board, cubicle type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved copper bus bar of rating 200 Amps for phases and neutral installed on porcelain insulators after removing the existing rusted portion of MS sheet andduly powder coated painted, replacing the hinges and checking the serviceability of the completePanel board including making serviceable the existing in store panel and rewiring if any requirement of accessories to replacement testing , commissioingcomplete all as specified and directed. The panel shall be dust and vermin proof IP-54 class protection and made out of 16mm CRCA MS sheet and 25X25X6mm thick MS angle iron frame work, front opening type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including Internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS-694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sqmm and comprising of followingsNote: Cost required to make the LT panel serviceable shall deemed to be included in quoted rates by the contractor. |
| 62 | Item 9.48 contd/-...INCOMINGS(a) MCCB 415 Volts, 100 Amp, rating 4 Pole, with thermal magnetic base release, Service Breaking capacity 25KA-1 No.(b) Digital multi function Panel Mounted Meters for Energy metering, monitoring and management system suitable for LT 3 phase 4 wire applicatons, using micro-controllers and non volatile memory and providing anti tamper features and communication facitlity athigh accuracy with accuracy for active energy as per IS:13779:99/IEC-61036, CL 1.0 operating temperature -10 to + 55°C, relative humidity 95% non condensing, 96x96x86 mm or nearer size 3 line backlit display of 6 digit each to display voltage, current, active power, reactive power, apparentpower factor frequency and other meters, digit height 8 mmX4.8 mm, Protection 2x IP-54 with all necessary CTs, PTs and rument, fuses and wiring Make HPL SOCOMEC del Ctem/A2 or equivalent- 1 NoOUTGOINGS(c) MCCB, 63 Amps, triple pole, 415 volts, 25 KA caturing capacity-02 Nos (Outgoing).(d) MCCB, 63 Amps, triple pole, 415 volts, 25 KA caturing capacity-02 Nos (Outgoing).(e) Supply & fixing Automatic star delta starter suitable for centrifugal pump set mentioned in items 8.34 & 8.35 here-in-before above complete with under voltage and overload protection, Single phase preventer and mounting in main electric panel and o including necessary wiring with PVC Insulated unsheathed copper conductor cable multistranded of suitable size, concealed in light ide GI or flexible pipe all as specified and directed. |
| 63 | Supply, installtion and testing of Altoch Dosing System (Model ADS - I) or equivelent comprising Non-metallic solution tank of capacity 100 ltrs with motor driven agitator to maintain uniform suspension throughout the tank with PE/FRP Lid & Level Gauge along with Single Phase Electric motor and Agitator with shaft & blade in Plastic - mounted on Tank.Lid must have port hole for pouring Calcum Hypochlorite and water when necessary.Lid must have provision for mounting dosing pump on the lid/wall alongwith Decrin Dosing Pump, (Model 96NGQ51 or equivelent) comprising motor driven reciprocating pump chemical feeder for injecting Calcium Hypochlorite employing motor-driven reciprocating chemical pump having output of 2 U.S. GPD to 40 U.S GPD and adjustable high pressure of up to 100 PSI all complete. |
| 64 | Dismantling,theexsiting the soundproof canopy Diesel Engine Driven Generating Set capable of delivering 62.50 KVA, water cooled, 415 Volts (AC three phase, 4 Wire system of supply) 50 HZ at power factor 0.8 minimum from existing location, Water cooling system, exhasust system, cylinder head assy, alternator, Dynamo, Complete fuel control system alongwith fuel injector, fuel injection pump, lubricating system, starting system and cleaning the all accessories,and replacing the engine gasket, cleaning the radiator assembly, drain out the existing lubricating oil, oil pump, calibriation of fuel injection pump alongwith fuel injector, replacing of Oiland fuel filter, cleaning the fuel tank, servicingthe all moving parts and reassembling the all accessories , rewiring the starting system,replaced genset control panel, replaced the sound proof sponzy kit, Control battery 12V, re surfacing the rusted canopy complete, repainting complete portion,refilling the radiator coolent, Engine oil ,testing the DG set various load capacity testing and commissioningof manufacturer or OEM Manufactured complete all as specified and directed. |
| 65 | Fixingandonlyincluding testing and commissioning offactory made and tested, indoor type, floor mounted, LT panel board, cubicle type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved copper bus bar of rating 200 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 1.6mm CRCA MS sheet and 25X25X6mm thick MS angle iron frame work, front opening type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS-694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sqmm. removing the existing rusted portion of MS sheet andduly powder coated painted, replacing the hinges, defective contactor etc and checking the serviceability of the completePanel board including making serviceable the existing store panel and rewiring if any requiredcompleteall as specified and directed Note:To Make the LT panel serviceable deemed to be include in quoted rates by the contractor |
| 66 | Item 9.52 contd/-...INCOMINGS(a)MCCB 415 Volts, 125 Amp. rating 4 Pole, Service Breaking Capacity 25 KA-1 No.OUTGOINGS(b) MCCB, 100 Amps, four pole, 415 volts, 25 KA capturing capacity-02 Nos.(c) Digital multi function Panel Mounted Meters for Energy metering, monitoring and management system suitable for LT 3 phase 4 wire applications, using micro-controllers and non volatile memory and providing anti tamper features and communication facility at high accuracy with accuracy for active energy as per IS-13779.99/EC-61036, CL 1.0, operating temperature -10 to +55°C, relative humidity 95% non condensing, 96X95X86 mm or nearer size, 3 line backlit display of 6 digit each to display voltage, current, active power, reactive power, apparent power, power factor frequency and other parameters, digit height 8 mmX4.8 mm, Protection index IP-54 with all necessary CTs, PTs and instrument, fuses and wiring Make HPL SOCOMEC model ClemfA2 or equivalent-1 No.(e) Phase indicating LED lamps (R-Y-B)-01 Set.(f) Supply & fixing of fully Automatic star delta starter suitable for pump set mentioned in item No 30 here- in-after complete with under voltage and \"overload protection, Single phase preventer and mounting In main electric panel and also including necessary wiring with PVC insulated and unsheathed copper conductor cable multistranded of suitable size, concealed in light grade GI or flexible pipe all as specified and directed-02 Nos Each. |
| 67 | Fixingandonlyincluding testing and commissioning ofactory made and tested, outdoor type, floor mounted, LT panel board, cubicle type suitable for 415 volls, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved copper bus bar of rating 200 Amps for phases and neutral Installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 3.15mm CRCA MS sheet and 50X50X6mm thick MS angle iron frame work, front opening type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC Insulated multi stranded copper conductor cable 1100 Volt grade IS-694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sqmm. removing the existing rusted portion of MS sheet andduly powder coated painted, replacing the hinges, defective contactor etc and checking the serviceability of the completePanel board including making serviceable the existing in store panel and rewiring if any requiredcompleteall as specified and directedNote:To Make the LT panel serviceable deemed to be include in quoted rates by the contractor. |
| 68 | Item 9.54 contd/-...INCOMINGS(a) MCCB 415 Volts, 100 Amp, rating 4 Pole, Service Breaking Capacity 25 KA-1 NoOUTGOINGS(b) MCCB, 63 Amps, four pole, 415 volts, 25 KA rupturing capacity-02 Nos (Outgoing).(c) Digital multi function Panel Mounted Meters for Energy metering, monitoring and management system suitable for LT 3 phase 4 wire applications, using micro-controllers and non volatile memory and providing anti tamper features and communication facility at high accuracy with accuracy for active energy as per IS-13779.99/EC-61036, CL 1.0, operating temperature -10 to +55°C, relative humidity 95% non condensing, 96X96X86 mm or nearer size, 3 line backlit display of 6 digit each to display voltage, current, active power, reactive power, apparent power, power factor frequency and other parameters, digit height 8 mmx4.8 mm, Protection Index IP-54 with all necessary CTs, PTs and instrument, fuses and wiring Make HPL SOCOMEC model CtemfA2 or equivalent-1 No(e) Phase indicating LED lamps (R-Y-B)-01 Set(f) Supply & fixing of fully Automatic star delta starter suitable for pump set mentioned in item No 31 & 32 here- in-after complete with under voltage and \"overload protection, Single phase preventer and mounting In main electric panel and also including necessary wiring with PVC insulated and unsheathed copper conductor cable multistranded of suitable size, concealed in light grade GI or flexible pipe all as specified and directed-02 Nos Each. |
| 69 | Fixing only electric driven Non clogging sewage centrifugal pump of discharge 60Cum per hours and 40 metre head horizontal shaft single suction pump with back pullout type design and suitable for solid size upto 65mm impeller made of phosphor bronze, deep groove bell bearings, including electric motor of suitable capacity class F insulation 415V, 50Hz, suction size 150mm and delivery size 150mm bore, complete and mounted on common MS base frame and foundations of the pump set including PCC foundation, MS bolts with nuts and anti vibration pads including dismantling the pump set and electric motor checking the servicebility, greasing , revarnishing and reassembling including making serviceable the existing pump ,testing and commissioning complete all as specifed and directed.Note:To Make the Pumpserviceable deemed to be include in quoted rates by the contractor. |
| 70 | Supply and install Non clog sewage centrifugal pump of discharge 60Cum per hours and 40 metre head horizontal shaft single suction pump with back pullout type design and suitable for solid size upto 65mm impeller made of phosphor bronze, deep groove bell bearings, including electric motor of suitable capacity class F insulation 415V, 50Hz, suction size 150mm and delivery size 150mm bore, complete and mounted on common MS base frame and foundations of the pump set including PCC foundation, MS bolts with nuts and anti vibration pads including following accessories: (a)Cl foot valve fixed with leather washer of suitable size, lift and swing single door IS-4030 marked (b)Pressure gauge diaphragm type upto 50 Kg/Sqcm-01 No(c)Priming arrangement of pump set by providing GI pipe 20mm dia medium grade, gate valve etc from service tank to suction pipe (Not more than 10m away) with all fittings etc complete-01 Job |
| 71 | Fixing only electric drivencentrifugal pump set of capable of delivering 13.90 LPS at 45 meter head comprising of horizontal split casing pump CI body with bronze impellers, stainless steel shaft, operating at 1440/1450 RPM coupled through a flexible coupling to a SPDP electric motor 1440/1450 RPM, 3 phase, 415V, 50Hz to match with the capacity of pump complete and mounted on common MS base frame and foundations of the pump set including PCC foundation, MS bolts with nuts and anti vibration pads, Pressure gauge diaphragm type upto 50 Kg/Sqcm-01 No, Cl foot valve fixed with brass flap of suitable size, lift and swing single door IS-4030 ISI marked including nuts, bolts and washers.elc complete all as specified and directed as per OEM. recommendations. including dismantling the pump set and electric motor checking the servicebility, greasing , revarnishing and reassemblingincluding making serviceable the existing pump ,testing and commissioningcomplete all as specifed and directed.Note:To Make the Pumpserviceable deemed to be include in quoted rates by the contractor. |
| 72 | Fixing only electric driven centrifugal pump set of capable of delivering 6.95 LPS at 45 meter head comprising of horizontal split casing pump CI body with bronze Impellers, stainless steel shaft, operating at 1440/1450 RPM coupled through a flexible coupling to a SPDP electric motor 1440/1450 RPM, 3 phase, 415V, 50Hz to match with the capacity of pump complete and mounted on common MS base frame and foundations of the pump set including PCC foundation, MS bolts with nuts and anti vibration pads, Pressure gauge diaphragm type- upto 50 Kg/Sqcm 01 No. Ci foot valve fixed with brass flap of suitable size, lift and swing single door IS- 4030 ISI marked including nuts, bolts and washers etc complete all as specified and directed as per OEM recommendations. including dismentling thepump set and electric motor checking the servicebility, greasing , revarnishing and reassemblingincluding making serviceable the existing pump ,testing and commissioning complete all as specifed and directed. Note:To Make the Pumpserviceable deemed to be include in quoted rates by the contractor. |
| 73 | S&F, PVC insulated, single core copper conductor Rs cable of size 10 Sqmm, 1100V grade Including cables complete and connection to submersible pump set complete all as specifed and directed. |
| 74 | S&F, PVC Insulated, single core copper conductor cable of size 50 Sqmm, 1100V grade Including cable lugs complete and connection to submersible pump set complete all as specifed and directed. |
| 75 | M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundations, couping of poles etc including fair finishing the exposed surface even and smooth with out using extra cement and necessary form work complete all as specified and directed |
| 76 | (SEWAGE TREATMENT PLANT) |
| 77 | Design, Supplying, installation, testing & commissioning of Sewage Treatment Plant based on Moving Bed biological Reactor (MBBR) Technology of capacity 250 Cum/day including all civil electro-mechanincal units shall be from E-in-C approved OEM as mentioned from OEMs of STP. Note:- Descriptionshall beread in conjuction with the detailsgiven here-in-after. P&I and Hydraulic diagram shall besubmittedbythe contractoras perdesigngiving completedetails of civilunites, mechanical units, pumps, valves pipes, etcas per standard format for approval of Accepting officerthrough GE within on e month of work order to commencementof work.(A) CIVIL UNITS (I) 1 No Bar screen chamber in RCC construction.(ii) 1 Nos Oil & Grease trap chamberin RCC construction (iii) 1 No Equalisation tank in RCC construction(iv) 2 Nos moving bed reactor tanks construct in series in RCC construciton (vi) 1 No chlorine contact tank in RCC construction(vii) 1 No Filterfeed tank in RCC construction (viii) 4 Nos sludge drying beds in brick masonry construction complete with media & Sand(ix)1 No operatorroom of 12 Sqm area with toilet facilityas per specification given in particularspecifications.NOTE:- The structural design and drawing shall be got vetted from any IITs/NITs/Government Engineering College before execution of work by the contractor. |
| 78 | Item 9.64 contd.../-(B) MACHANICAL EQUIPMENTS/MACHINARIES & ELECTRICAL COMPONENTS(i) 1 No fineBar screen as per given specification.(ii) 1 set of UPVC Air gridforEqualisation tank(iii)2 Noscentrifugal self priming sewage pumps.(iv) 2 Nos Air blower with motor and its accessories.(v)2 sets of SS Air grid for MBBR reacotrsas perdesign (vi) 02 lot of MBBR media asper design requirement(vii)1 Lot of Tube settlermedia as per design requirement (viii)2 sets of Hydro-dosing system, each set comprising of tank (HDPE) & Dosingpump.(ix)2 Nos centrifugalmonoblock filter feed pumps (x) 1 No dual media filter (FRP) completewith multiport valve and media as required (xi) 1 No Activatedcarbon filter (FRP) completewith multiport valve and media as required(xii)1 Lot of UPVC Air grid fortreated water tank(xiii) 1 Lot of inter connecting pipe line network incluidng all n ecessary fittings and valves for efficient functioning of intire shceme all as per design and specification as per approved P&I and Hydraulic diagram approvedby Accepting officer (xiv) 1 Lot of instrumentations comprising of 1 No pressure guage for each pump and blower & filters 3 Nos level control switches 1 Nos auto desludge valve & 2 Nos air rotameters.(xv) 1 No electricalpanel for electricalunits of sewage treatment plant.(xvi) 1 No electricaldabling from STP Panel to various treatmentplant drivers with suitable cables |
| 79 | Item 9.64 contd.../-Notes:- 1. The inlet sewage/raw sewage characteristics likely to be as mentioned below:-(a) BOD - 200 to 275 mg/ltr (b)COD- 550 to600 mg/ltr (c)TSS- 350 to 450 mg/ltr (d)PH - 06-09(e) Oil & Grease- 20 mg/ltr (f)Coliform- 10^6-10^7MPN/100ml2. The system shall becapablefo treating the sewage soas to meetthe outleteffuent quality as per under mentionedstandards:-(a) BOD - <10 mg/ltr (b)COD- <150 mg/ltr (c)TSS- <10 mg/ltr (d)PH - 6.5 - 8.5(e) Oil & Grease- <10 mg/ltr (f)Coliform- <100 MPN/100ml(g) Residual chlorine > 1mg/Ltr3. The parametes mentionedabove except residualchlorine shall be gottested form NABL certifiedlaboratory for approval fo GE beforehanding over the work to MES |
| 80 | Note :-All drawings are tentative and only for the purpose of site plan. |
