Tender For Proposed Boundary Wall And M.S. Slider Gate At District Jail Kanpur Dehat (U.P.) - Excavation Of Foundation In Ordinary Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 Meter And Including Filling, Watering And Ramming O, kanpur-Uttar Pradesh

Tender For Proposed Boundary Wall And M.S. Slider Gate At District Jail Kanpur Dehat (U.P.) - Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) 4 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 5 R.C.C. (M-20) work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Beam excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and excluding necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item. 6 R.C.C. work in R.C.C.Raft foundation and footingwithapproved stone ballast.(Using1:1.5:3Mix concrete) 7 R.C.C. work in R.C.C. columns in 1:1.5:3 having strength not less than M-20. Above Plinth 8 R.C.C. work in R.C.C. columns in 1:1.5:3 having strength not less than M-20. Below Plinth 9 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks. 10 M-150 brick work in 1:6 (one cement and six coarse sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. 11 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:6 (1 cement : 6 coarse sand) 12 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand 13 Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 14 Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) 15 Centering and shuttering including strutting, propping etc. and removal of form for all heights : (a) Foundations, footings, bases of columns, etc. for mass concrete. 16 (b) Lintels, beams, plinth beams, girders, bressumers and cantilevers. 17 (c) Columns,Pillars, Piers, Abutments, Posts and Struts. 18 P/Fixing M.S. Work For Grill 10mm Sqmm. Including all complete. 19 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes. 20 GST Extra as per applicable

INR 5900 /-

INR 25000.0 /-

Refer document