Tender For Providing Painting, False Ceiling, Vitrified Tiles And Fly Mesh Works At Ground Floor And First Floor Of Sgsd Building, Ecil, Hyderabad - 1 1 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-incharge. 2 2 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 3 3 Removing the existing white or colour wash by grinding and sand papering and preparing the surface smooth, removal of unserviceable material etc., as per the direction of Engineer-in-charge. 4 4 Removing the existing PVC sheet and stacking of serviceable material and disposal for unserviceable material within 1KM lead. 5 5.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 6 6.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 7 6.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 8 7.1 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper 9 8.1 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides 10 9.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 11 9.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 12 10 Extra for etching of float glass panes in aluminium work in approved pattern as per the directions of Engineer-in-charge. 13 11.1 Providing and fixing powder coated aluminium handles, (minimum thickness of powder coating 50 micron) of required colour or shade, with necessary screws etc. complete : 125mm 14 12.1 Providing and fixing powder coated aluminium tower bolts (minimum thickness of powder coating 50 micron) of required colour or shade, with necessary screws etc. complete : 300x10 mm 15 13 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 16 14 Providing and fixing of Daiken/Armstrong mineral fibre false ceiling with hot dipped galvanized steel grid work, surface chemically cleaned capping perfectly pre-finished in baked polyster paint, main tees of size 33x24x0.5mm thick at every 1.2m centre to centre perimeter with L-angle 24x24x0.5mm thick to form a grid of size 600x600mm and suspending the grid from RCC roof using 12 guage GI wire and rawl plug at every 1200mm intervals wherever required and laying Daiken/Armstron mineral fibre acoustic ceiling tiles pattern of size 600x600x14mm over the formed grid etc., complete and as directed by Engineer-in-charge. Note: False ceiling tiles not laid at the place of electrical fittings should be handed over to department. 17 15.1 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 18 16 Supplying and fixing vertical venetian blinds 4 width as per user s requirement with necessary accessories and approved colour etc., complete and as directed by Engineer-in-charge. 19 17 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make: JK putty / Birla Putty. 20 18.1 Distempering with 1st quality acrylic distemper (ready made) VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer s specification. Make: Asian / Berger/Nerolac / Indigo One or more coats on old work 21 19.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Make: Asian/Berger/nerolac/indigo One or more coats on old work 22 20.1 Wall painting with premium acrylic emulsion paint of interior grade, VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats 23 21.1 Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). 24 22.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer 25 23.1 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315 brand logo embossed on the body / plate with double spring mechanism and door weight up-to 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece MS sheet outer box with slide plate etc., complete and as directed by Engineer-in-charge. With stainless steel cover plate minimum 1.25mm thickness. 26 24.1 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm 27 25 Providing and applying shrinkage crack filler of Dr.Fixit crack x paste or other equivalent material including opening the loose part of the existing crack, making the same in V-shape in required depth and width, cleaning the grooved by removing dust, oil, grass, loose particals etc., press the crack filler into the crack one time only with a spatula or putty knite and level the surface etc., completed all as per manufacturer s specifications and as per direction of the Engineer-in-charge.
