Tender For In Hariparvat Zone, Under Swachh Bharat Mission-2024, Work Of Installing Sculptures, 2D Painting Near Khandari Chauraha And Khandari Campus. - Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50, agra-Uttar Pradesh

Tender For In Hariparvat Zone, Under Swachh Bharat Mission-2024, Work Of Installing Sculptures, 2D Painting Near Khandari Chauraha And Khandari Campus. - Dismantling Tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm.(Chapter No.15 DSR Code-15.23.2 Page No.241) 2 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (Chapter No.15 DSR Code-15.25 Page No.241) 3 Cartage of Earth/Malva upto 8km distance etc all complete. (Chapter No.1 DSR Code-1.1.2 Page-83) 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 Coarse sand (zone-lll) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources etc all complete. (Chapter No.4 DSR Code-4.1.10 Page-103) 5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) (Chapter No.6 DSR Code-6.1.1 Page-127) 6 Cement plaster in Coarse sand :12mm cement plaster of mix : 1:4 (1 cement : 4 Coarse sand) (Chapter No.13 DSR Code-13.4.1) 7 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (Chapter No.5 DSR Code-5.1.2 Pg- 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars. (Chapter No.5 DSR Code-5.22.1 Pg-118) 9 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (22.40-53mm) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. 10 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-35 grade with approved colour design and pattern. (Chapter No.16 DSR Code-16.91.2 Page-261) 11 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in 1:2:4 (1 cement : 2 Coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources etc all complete. (Chapter No.4 DSR Code-4.1.3 Page-103) 12 Supply of Pre-cast RCC Slab size 900x500x150mm etc all complete. (As per Market Rate) 13 Fixing of R.C.C Slab etc all complete. (NS) 14 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 15 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 16 Making ornamental 2D Painting with special design make by specialist painter laying of two coat birla white putty and design by asian paint including all material etc. all complete. (NN Approved) 17 Total(A) 18 Add amount for Estimate Figure match 19 Say Amount

INR 500 /-

INR 83281.0 /-

Refer document