Tender For Pond Rejuvenation In Village-Bhatta,Yea. Wc-06- Cleaning Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1M Aboveground Level And Removal Of Rubbish Up To Distanc, Gautam Buddha Nagar-Uttar Pradesh

Tender For Pond Rejuvenation In Village-Bhatta,Yea. Wc-06 - Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m aboveground level and removal of rubbish up to distance of 50m out side the periphery of the area cleared 2 Pumping out water by Diesel pump of discharge capacity of4000 lts per hour including fuel operator , suction & delivery pipes of size 4 X 4 length 150 as per direction of Engineer in Charge 3 Item code morth 301Excavtion in soil usinghydraulics excavator and tippers with disposal upto 1000 metersExcavation for road workin soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopesin accordance withrequiremements of lines , grades and cross section and transportation to the embankment locationwithin all lifts and lead upto 1000 meters 4 Add extraa for sludge/mud/liquid 50% of item no. 3 5 cement concrete with 4cm gauge approved stone ballast coarse sand and cement in the proportion of 8:4:1 including supply of all material labour tools and plants etc required for all completion of work (item code 5.4.3) 6 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-charge1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 7 Steel Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level thermo mechenically treated bars 8 Centering and shuttering including strutting, propping etc. and removal of form for: foundation, footing, bases of column, etc for mass concrete 9 Centering and shuttering including strutting, propping etc. and removal of form for: wall including attached pilasters, butteres, plinth and string couses 10 Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landing balconies and access platform 11 Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs & break in floors and walls under 20cm wide 12 Laying non-pressure NP2 class R.C.C Pipe jointed with stiff mixture of cement mortar in the proportion of 1:2(1 cement : 2 coarse sand ) including testing of joints etc. complete 13 Cement concrete with 4cm gauge approved stone ballast coarse sand and cement in the proportion of 8:4:1 including supply of all material labour tools and plants etc required for all complation of work (item code 5:4;3) 14 M-150 brick work in 1:6 cement & fine sand 1.25F.M mortar in foundationand plinth including supply of all materials labour complection of the work UPPWD SOR 303 15 Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 includding suply of all material labour tools and plants etc required for proper completion of the work. 16 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-charge1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 17 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DAR/10.25.2/Based on UPPWD/SOR-2020)) 18 Supplying and stacking at site 90mm to 45 mm size stone aggregate 19 Supplying and stacking at site 53mm to 22.4 mm size stone aggregate 20 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 21 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). 22 12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) 23 Providing orange colour safety footrest of minimum 6 mm thick plastic encapsulated as per IS :10910 on 12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mmx25mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between proteyded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

INR 1795 /-

INR 122500.0 /-

INR 61.21 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB