|
| 1 | Surface dressing of the ground including removing vegetation andnequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 3 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. completelevels. Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm |
| 4 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work |
| 5 | Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar,ladder, railings, brackets, gates and similar works |
| 8 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 9 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 10 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 11 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 12 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 13 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 14 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm |
| 15 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 16 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes |
| 19 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall |
| 20 | 15 mm dia nominal bore |
| 21 | 20 mm dia nominal bore |
| 22 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 23 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete : |
| 24 | 15 mm nominal bore |
| 25 | 20 mm nominal bore |
| 26 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter |
| 27 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 28 | 15mm nominal bore |
| 29 | 20 mm nominal bore |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 31 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 32 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 33 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 34 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 35 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 36 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 37 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 38 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 39 | Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks |
| 40 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 41 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 42 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar |
| 43 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 44 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transportincluding loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, completeas per directions of Engineer-in-charge. |
| 45 | P/F CP Trap Jali of approved make etc complete |
| 46 | Providing and fixing C.P. brass pillar cock (ISImake) 15 mm nominal bore. |
| 47 | P/F hand shower (Health Facuet)(ABS Body) with 8 mm dia 1 meter longflexible tube and wall hook(Cera make) cat no.F8030107AB or equivalent make complete.in all respect. |
| 48 | P/F CP brass two way bib cock 15 mm nominal bore of approved make |
| 49 | Repair and replacement of cistern syphon with approved quality. |
| 50 | P/F Tank Nippale 15 to 20 mm dia. of approved quality(ISImake) |
| 51 | P/F CPVC ball valve 20 mm dia.(Supereme make or equiavlent) of approved quality |
| 52 | P/F CPVC F T A/ M T A with reducer sokit 20 mm dia. of approved quality(ISImake) |
| 53 | Charges for disconnecting and loading / unloading the PVC water storage tank500 to 1000 ltr capacity from terrace to Engineering store Maurice Nagar as directed by engineer-in-charge |
| 54 | P/F CP brass waste jali for wash basin / sink/32 mm dia nominal bore etc complete |
| 55 | P/F CP brass jet sprayISI marked for EWC pan with nut bolts etc complete. |
| 56 | Repair the damaged GI pipe line with required GI pipe and fittings etc complete as per direction of Engineer –in-charge (15 to 25 mm) |
| 57 | P/F gun metal gate valve 15 mm dia. of approved quality(DRP make) |
| 58 | Repair of kota stone flooring i/c dismantling stopping seepage / blockage etc complete as per direction of Engineer in-charge. |
| 59 | Removal blockage like road gully chamber, sewer manhole complete as per direction of Engineer in-charge. |
| 60 | Cleaning of roof, vertical rain water pipe, spout, sunshade also and necessary removal of vegetation complete in allrepsect as per the direction of Engineer-in-charge. |
| 61 | Repair of SCI pipe line in shafti/c taking out and fixing SCI pipe, lead joint etc with necessary repair complete 75 mm to 100 mm dia nominal bore |
| 62 | Providing and fixing glass door lock of approved make with screws, fittings etc complete as per direction of Engineer in-charge. |
| 63 | P/Fwooden cupboard of depth upto 450 mm with shelves, top, bottom, sides & shutters with19 mm thick commercial board (Duro/ Centuary or equivalent)and cover with 1 mm thick laminate i/c 6 mm thick commercial ply (Duro/ Centuary or equivalent) on back, teak wood beading on edges, multipurpose lock, polishing and painting etc all complete as per direction of Engineer-in-charge (Measurement will be made for front portion only) |
| 64 | P/F19 mm thick Commercial board cupboard shutter with second class teck wood frame necessary board shelves, sunmica on front face shutter, painted from inside with necessary brass handles / knob hinges, megnet catcher etc i/c painting and polishing etc. complete(Measurement will be made of front portion only) |
| 65 | Providing and fixing 0.80 mm thick aluminium sheet over the door withnails and screws and washer etc. complete in all respect as per direction of Engineer in-charge. |
| 66 | P/F CP brass waste jali for wash basin / sink/32 mm dia nominal bore etc complete |
