}

Tender For Ward 12 Palika Ki Bhoomi Ki Boundary Wall And Shade Work - Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M Inwidth Or 10 Sqm On Plan), Including Dressing Of , shamsabad-Uttar Pradesh

Nagar Palika Parishad has published Tender For Ward 12 Palika Ki Bhoomi Ki Boundary Wall And Shade Work - Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M Inwidth Or 10 Sqm On Plan), Including Dressing Of . Submission Date for this Tender is 11-03-2025. Wall construction Tenders in shamsabad Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

47530681
Corrigendum : Tender For Ward 12 Palika Ki Bhoomi Ki Boundary Wall And Shade Work - Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M Inwidth Or 10 Sqm On Plan), Including Dressing Of
Open Tender
Indian
Uttar Pradesh
Shamsabad
11-03-2025

Tender Details

Tender For Ward 12 Palika Ki Bhoomi Ki Boundary Wall And Shade Work - Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, for all lift, including getting out the excavated soil and disposal ofsurplus excavated soil as directed, within a lead of 50 m. DSR 2.8 2 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8graded stone aggregate 40 mm nominal size derived from natural sources)DSR 4.1.8 3 Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement :6 coarse sand) : DSR 6.1.2 4 Brick work with common burnt clay F.P.S. (non modular) bricks of superstructure class designation 7.5 in superstructure above plinth level up tofloor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6coarse sand) DSR 6.4.1 5 Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floorfive level, excluding cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominal size derivedfrom natural sources) : DSR 5.2.2 6 Centering and shuttering including strutting, propping etc. and removal ofform for Foundations, footings, bases of columns, etc. for mass concreteDSR 5.9.1 7 Suspended floors, roofs, landings, balconies and access platform withwater proof ply 12 mm thick DSR 5.9.20 8 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources :3 graded stone aggregate 20 mm nominal size derived from naturalsources).DSR 4.1.2 9 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level/above plinth (TMT bars of grade Fe-500D or more.DSR 5.22.6 10 12mm Cement plaster with cement mortar in proportion of 1:4 cement &coarse sand of single coat for interior plastering upto floor two levelincluding internal rounded angles chamfers, and rounded angles notexceeding 80mm. In girth and finished even and DSR 13.4.1 11 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources :3 graded stone aggregate 20 mm nominal size derived from naturalsources).DSR 4.1.2 12 Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc.,including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted withspecial shaped washers etc. complete.DSR 10.16.3 13 Providing corrugated G.S. sheet roofing including vertical / curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (up to any pitch inhorizontal/ vertical or curved surfaces), excluding the cost of purlin 14 Distempering with 1st quality acrylic distemper (ready mixed) having VO content less than 50 gram/litre 15 Add 18% GST

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 05-03-2025 date extenshion oo Date 11-03-2025
2 22-02-2025 date extenshion Date 05-03-2025

Key Value

Document Fees
INR 1250 /-
EMD
INR 61000.0 /-
Tender Value
INR 12.05 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail