Tender For 15/8 Tm Marg Ke Km-358 Se Inayatnagar Road- Construction Of Sub Grade And Earthern Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads Transporting To Sites, Spreading, Grading To Required Slope And Compacted To , moradabad-Uttar Pradesh

Tender For 15/8 Tm Marg Ke Km-358 Se Inayatnagar Road - Construction of sub grade and earthern shoulders with approved material obtained from borrow pits with all lifts and leads transporting to sites, spreading, grading to required slope and compacted to meet requirement of table 300.2 including all labour, material, T&P etc complete but excluding GST. 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 Kn in stages to proper grade and camber applying and brooming stone screening / binding material to fill up the interstics of coarse aggregate, watering and compacting to the required dencity. Grading 3 as per technical specification clause 405including all labour, material, T&P etc complete but excluding GST. 3 Providing and applying Tack coat with bitumen VG-10 using Bitumen pressure distributer @0.30 kg. per sqm on the prepared dry and hungry bitumenious surface cleaned with Hydraulic broom as per Technical specification Clause 503. including all labour, material, T&P etc complete but excluding GST. 4 Providing, laying and rolling of open graded P.C. of 20mm thickness composed of 13.2mm to 5.6mm aggregates eigher using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previously prepared base i/c mixing in a suitable plant, laying and rolling with a three wheeld 80-100 kN static roller capacity, finished to required level and gredes to be followed by seal coat of eigher Type C as per Technical Specification Clause 508 including all labour, material, T&P etc complete but excluding GST. 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 including all labour, material, T&P etc complete but excluding GST.

INR 854 /-

INR 194000.0 /-

Refer document