Tender For Mgnregs Material Supply, 1 Mgnregs Material Supply 1.01 100 Mm Channel Shoulder 2.5 M Long 1.02 100 Mm S.C.I. Trap With Vent Heel 1.03 15 Mm C.P.Brass Tap 1.04 15 Mm Ptmt Bib Cock 1.05 200 Mm Aluminium Aldrop 1.06 35 Mm Thick Factory Made, Palakkad-Kerala

Tender For Mgnregs Material Supply, 1 MGNREGS Material Supply 1.01 100 mm channel shoulder 2.5 m long 1.02 100 mm S.C.I. trap with vent heel 1.03 15 mm C.P.brass tap 1.04 15 mm PTMT bib cock 1.05 200 mm Aluminium aldrop 1.06 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) 1.07 Acrylic exterior paint 1.08 Adjustable span ESO+SI (2.35-3.40) 1.09 Adjustable telescopic prop 3 m (2.02-3.75m) 1.1 Aluminium T or L Sections 1.11 Anodised Aluminium butt hinges 100x75x4 mm 1.12 Anodised Aluminium handles 125 mm with plate 175 X 32 mm 1.13 Anodised Aluminium tower bolt (barrel type)300x10 mm 1.14 Beam clamp 300-380 mm (450-1070 mm) 1.15 Binding wire 1.16 Black colour dark shade pigment 1.17 Black Japan 1.18 Bone Meal 1.19 Brass 100 mm mortice latch and lock with 6 levers without pair of handles 1.2 Brass bib-cock-15 mm dia 1.21 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 1.22 Bright finished or black enameled mild steel screws 20 mm 1.23 Bright finished or black enameled mild steel screws 40 mm 1.24 C.I. bracket for wash basin and sinks 1.25 C.P. brass waste 32 mm 1.26 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. 1.27 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 1.28 Chromium plated Brass screws 20 mm 1.29 Chromium plated Brass screws 25 mm 1.3 Chromium plated Brass screws 30 mm 1.31 Coarse Sand (zone III) 1.32 Column clamp 450x1070 mm 1.33 Corner angle 45x45x5 mm 1.50 m long 1.34 Corner angle 45x45x5 mm 2.50 long 1.35 Cowdung 1.36 Deharadun white lime 1.37 Double clip (bridge clip) 1.38 Exterior primer 1.39 Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile 1.4 Fine sand (zone IV) 1.41 Flats exceeding 10 mm in thickness 1.42 Flats up to 10 mm in thickness 1.43 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 1.44 Float glass sheet of nominla thickness 5.5 mm (weight not less than 13,50 Kg/ sqm) 1.45 Flushing Cistern P.V.C. 10 Its capacity (low level) (white) (with fittings, accessories and flush pipe) 1.46 Galvanized steel L or J hooks 1.47 Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm 1.48 GI chicken mesh 1.49 GI pipe 40mm dia 1.5 GI pipe 50mm dia 1.51 GI trafford profile sheet 0.35mm thick 1.52 Grafted Mango Sapling 1.53 Green Net 75% shade 1.54 Hard board 6 mm thick 1.55 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 1.56 Hollock ballies 125 mm diameter 1.57 Interlocking C.C. paver block (60 mm thick, M-30) 1.58 Interlocking C.C. paver block (80 mm thick, M-30) 1.59 Iron hooks & eyes 100 mm 1.6 laterate stone of size 40x20x15cm 1.61 M.S. Tube 40 mm dia 1.62 Manglore tiles 20mm thick 1.63 Metal Primer (U.G.) 1.64 Mild steel hooks 1.65 Mild steel plates 1.66 Mild steel rivets 1.67 Mild steel round bar 12 mm dia and below 1.68 Mild Steel round bar above 12 mm dia 1.69 Mild steel sheets for tanks 1.7 Mild steel sheets with bolts and nuts to rest on pintels 1.71 Mild steel tubes electric resistant or induction butt welded 1.72 Mild steel tubes hot finished welded type 1.73 Multi surface paint 1.74 Neoprene / EPDM rubber gasket 1.75 Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock 1.76 Plastic emulsion paint 1.77 Polyethylene water storage tank with cover and suitable locking arrangemnet 1.78 Polyurethene bags 1.79 Portland Cement 1.8 Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm 1.81 Powder coating 50 microns on aluminium sections 1.82 Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement 1.83 Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS:12823 (exterior grade) 12 mm thick 1.84 Premium acrylic emulsion of interior grade, having VOC content less than 50gm/litre 1.85 Prop 2 m (2-3.5m) 1.86 PVC bend 110 mm dia 1.87 PVC Bend 63 mm dia 1.88 PVC Bend 75mm dia 1.89 PVC door Elbow 110 mm dia 1.9 PVC door Elbow 63 mm dia 1.91 PVC Elbow 110 mm dia 1.92 PVC Elbow 63 mm dia 1.93 PVC Elbow 75mm dia 1.94 PVC End cap 63 mm dia 1.95 PVC pipe 110 mm outer dia 6kgf/cm2 1.96 PVC pipe 150 mm outer dia 6kgf/cm2 1.97 PVC pipe 25 mm outer dia. 10kgf cm2 1.98 PVC pipe 50 mm outer dia.6kgf/cm2 1.99 PVC pipe 63 mm outer dia . 6kgf/cm2 2 PVC Pipe 63 mm outer dia 4kgf/cm2 2.01 PVC pipe 75 mm outer dia 6kgf/cm2 2.02 PVC Reducer 63x50 mm dia 2.03 PVC Socket/coupling 110 mm dia 2.04 PVC Socket/coupling 75 mm dia 2.05 PVC Tee 63x63x63 mm dia 2.06 PVC vent cowl 75 mm dia 2.07 Quarry waste 2.08 Rawl plug 50 mm (designation 10 nos) 2.09 Rectangular shape 453x357 mm Mirror with Plastic moulded frame 2.1 Red oxide zinc chromate primer 2.11 Second class kail wood in planks 2.12 Second class kail wood in scantling 2.13 Single clip 2.14 Solid blocks of size 30x20x15cm 2.15 Solid blocks of size 30x20x20cm 2.16 SOLID BLOCK 40x20x20 2.17 Special primer (C.W) 2.18 Stainless steel kitchen sink without drain board 470x420 mm bowl depth 178 mm 2.19 Stone Aggregate : 10 mm 2.2 Stone Aggregate : 40 mm 2.21 Stone Aggregate :20 mm 2.22 Stone Aggregate(sing size): 06 mm nominal size 2.23 Stone for masonry work 2.24 Structural steel such as tees , angles , channels and R.S. Joists 2.25 Sundries 2.26 Synthetic enamel paint in black or chocolate shade 2.27 Through and bond stone size 24 X 24 X 39cm 2.28 Twisted steel/deformed bars 2.29 Vibrator (Needle type 40 mm) 2.3 Vitreous china flat back wash basin 550x400 mm 2.31 Vitreous China flat back wash basin 630x450 mm 2.32 Vitreous China orrisa type w.c. pan size 580 mm 2.33 Vitrified floor tile 60x60 cm 2.34 Wall form panel 1250x450xmm 2.35 Wall form panel 1250x500mm 2.36 Water proofing cement paint 2.37 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre 2.38 welding by electric plant 2.39 wire nails

INR 2950 /-

INR 50000.0 /-

INR 50 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document-1	0 KB
Click here to download tender document	Tender Document-1	0 KB