|
| 1 | Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil. |
| 2 | M&L for PCC 1:2:4type B-2(40mm graded aggregate) as in walls or retaining walls, any thickness,size or shape columns, pillars and posts (incl caps and base). |
| 3 | S&FMild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square 10mm dia nut,exc 5cm but n exc 10cm long. |
| 4 | M&L for W -Beam / Threi beam Metal crash barrier single/ double side guard rail cold rolled section having minimum yiels strength 2400kg/Sqcm having width of 312/510 mm and depth of corrugulation 83mm with hot dip galvanized of zinc coating @ 550gr/Sqm |
| 5 | M&L for Mild steel U Sectionwith web and flanges cut to shape for base of metal crash barrier including base plate, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under \"Structural Steel\") complete all specified and directed. |
| 6 | Surface dressing n exc 15 cm deep in soft/ dense soil complete all as specified and directed by engr in charge |
| 7 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil |
| 8 | Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil. |
| 9 | M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc. |
| 10 | M&L for cement concrete type D-2, 1:4:8in Cement concrete in draft wall , filling and mass concrete complate all specified and directed |
| 11 | M&L for MS TMT bars12mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 12 | M&L for MS TMT bars 08 mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders. |
| 13 | M&L for Reinforced cement concrete nominal mix type B0 1:2:4 Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all specified and directed |
| 14 | M&L for re-inforced cement concrete 1:2:4 type B-0(12.5 mm graded aggregate) as in columns, pillars etc complete. |
| 15 | M&L for re-inforced cement concrete 1:2:4 type B-0(12.5 mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete. |
| 16 | M&L for Reinforced cement concrete nominal mix type B0 1:2:4 using 12.5mm stone aggreggate for chajjascomplete all specified and directed |
| 17 | S&F of Formwork square or rectangularto sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. |
| 18 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete all as specified and directed. |
| 19 | S&F of Formwork to chullah hoods, chajjas, troughs and similar items including edgecomplete all specified and direted |
| 20 | S&F of Formwork square or rectangularto sides of pillars, posts, struts, piers, columns and stanchions complete all specified and direceted |
| 21 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete. |
| 22 | M&L for rendering 10 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement all as specified and directed. |
| 23 | M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finshed rough to receive tiles complete all as specified and directed. |
| 24 | M&L rendering 15 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement . |
| 25 | M&L for rendering 15 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement. |
| 26 | M&L for preparing newly plastered surfaces of walls and applying three coats of white wash. |
| 27 | M&L for newly plastered surfaces of walls and applying two coats of cement based paint,over a coat of primer complete all as specified and directed. |
| 28 | S & F roof trusses (framed), trussed, purlines, crane grantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance piecces, cleats, plates etc confirming to Fe.290.Gde-E-165. |
| 29 | M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 30 | S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed. |
| 31 | S&F Pre-Painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed. |
| 32 | Returning/filling in including spreading, levelling, watering and well remming in hard/dense soil. |
| 33 | Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point. |
| 34 | M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface. |
| 35 | M & L 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base, including form work complete as as specified and directed by Engineer-in-Charge |
| 36 | M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in sub base of floorings. |
| 37 | M & L for screed bed or bedding layer of15 mm thick for laying floor finishes in CM (1:4 ) complete all specified and directed |
| 38 | M&L for 20 mm thick screed bed in CM 1:6 for laying floor tiles . |
| 39 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set with grey cemnt and no pigment, jointed and pointed in neat cement slurry in floor as specified and directed. |
| 40 | M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation. |
| 41 | S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces. |
| 42 | M & L for 2 nd class Hard wood plain fillets, square, rectangularor triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm. |
| 43 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 44 | S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified. |
| 45 | S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets decorative end supports etc complete all as directed” |
| 46 | M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement. |
| 47 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete |
| 48 | S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed. |
| 49 | M&L for 2nd classhard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 50 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc |
| 51 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0. |
| 52 | S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.complate all specified and directed |
| 53 | S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 54 | S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed complete all as specified and directed. |
| 55 | S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed |
| 56 | S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type. complate all specified and directed |
| 57 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 58 | S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed |
| 59 | S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed. |
| 60 | M&L for PCC 100mm thick, type B-2, 1:2:4 (using 40mm graded sone agg) in sub-floors, sub-base, floors and pavings etc.complate all specified and directed |
| 61 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortor 1:4 complete all as specified and directed by in charge. |
| 62 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified. |
| 63 | M & L for 350 x 250 x 7 mm/450 x 350 x 7 mm thick glazed coloured ceramic tiles on vertical surface of wallset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. complete all as specified and directed. |
| 64 | M & L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 65 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 66 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed over 10mm thick rendering in CM (1:4) on brick or concrete walls surfaces as backing coat complete all as specified and directed. |
| 67 | M & L for providing 4mm thick \"E\" Board in ceiling with galvanised iron snap frame of \"T\" section 24 x 38 x 0.70 mm wall/ceiling angle 25x25x0.35mm thick and hanging with 4mm GI wire all fixed arrangement will be done as per manufacturer instruction incl two coat of oil bound distemper anirected.d one coat of white wash complete all as specified and directed by engr in charge. |
| 68 | M&L rolled mild steelfor Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentFe- 290 (Gde E- 165).complate all specified and directed |
| 69 | M&L forPreparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of black japan paint over a coat of red oxide complete all specified and directed. |
| 70 | S&F Mild steel flat ironas in hold fasts; complete all as specified. |
| 71 | Supply & fix sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 72 | M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall all as specified and directed. |
| 73 | M&L for newly plastered surfaces of walls and applying two coats of oil bound destemper,over a coat of primer complete all as specified and directed. |
| 74 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 75 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frameshall be covered with heat moulded plain colour PVC \"C\" channelhaving a PVC sheet strip of 20mm width stuckinside with solventcementfor stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frameat siteas per specification & drawing complete all as specified and directed. |
| 76 | S&F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed. |
| 77 | S&F 15mm bore angle stop valves, fancy type chromium plated, screwed down, high pressure,screwed both ends for iron pipe or for unions & fixed complete all as specified and directed. |
| 78 | S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cmlong between fllanges complete all as specified and directed. |
| 79 | S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all specified and directed. |
| 80 | S& F PVC connections 15 mm size, 450 mm long with PTMT nuts complete all as specified and directed. |
| 81 | M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 82 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 83 | S&F PVC (SWR) bends any radius with access door, 75mm dia complete all as specified and directed. |
| 84 | S&F600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board fixed t wooden plugs with chromium plated brass screws and cup washers all as specified and directed |
| 85 | S&F Vitreous china urinals, bowl type 465x355x265 mm white, providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. |
| 86 | S&F vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting standincluding 32mm waste fittings, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 87 | S&F 15mm fancy type chromium platedpillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 88 | M&L for swivel shower rose of PTMT any colour for fixing with 15mm pipe.(Min Wt 40gms) all as specified and directed complete all as specified and directed. |
| 89 | M & L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 90 | S & F framed work such as grills, gratting,framed brackets of angles or tees with web and flange cut to shapeetc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes stagging,gatesand similar work con-forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 91 | S&F Rotational mounded polythene water storage tank of 750 ltrs capacity,(multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I. complete all as specified and directed. |
| 92 | S&F ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipes of 20 mm dia or brass ferrule and fixed, all as directed. |
| 93 | S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed complete all as specified and directed. |
| 94 | S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings forwater supply pipes fixed to walls complete all as specified and directed. |
| 95 | S& F 20 mm bore galvanised steel tubes medium grade with all fittings for water supply pipes fixed to walls complete all as specified and directed. |
| 96 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 97 | S&F PVC (SWR) bend any radius 110 mm bore complete all as specified and directed. |
| 98 | M&L 150mm bore Concrete bed (PCC 1:4:8 type D2)to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 99 | Material & labour for light/fan Point wiring with 1.5 sqmm (nominal are) PVC insulated unshealhed (FRSH), 1100 volts grade multi straanded copper conductor in and including PVC casing capping of adequate size with all fittins and accessories including PVC boxes for housing the swithches (Make of box prestoplast Prestoleak), including PVC insulated and unsheathed (FRSH) single core multi strainded copper conductor cable of size 1.5 mtr green in colour as earth continuity conductor connected to common earth colly upto ceiling rose/ light point complete all as specified and directed. |
| 100 | All as per item No. 99 here in before One 3 pin socket outlet, 6 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 101 | All as per item No 99 here in before but for one 3 piin socket outlet 5 amps three pin controlled by one switch on independent board coplete all as specified directed. |
| 102 | All as per item ser No 99here in beforebut for 3 pin 15 Amps socket outlet independent board drawn from DB and including PVC insulated multi stranded copper conductor 2.5 sqmm 1100 volts grade and wire earth continuity wire 2.5 sqmm PVC insulated copper wire (Green) (FRLSH) including PVC casing and capping complete all as specified and as directed. |
| 103 | M & L for point wiring for one scket outlet 5 Amp on independent board with 4 sqmm (nominal area), PVC insulated unsheathed (FRLSH) 1100 volts grade multi stranded copper conductor in and including PVC casing cpping of adequate size PVC insulated and unsheathed (FRLSH) single core multi stranded copper conductor cble of size 4 sqmm green in colour as earth continuity conductor connected to common earth colly complete all as specified and directed |
| 104 | S &F for socket outlet 2 in 1, 5 pin, 5 Amp flush type univeral all as specified and directed Make: Havells/Anchor/legrand/Crabtree |
| 105 | S &F for socket outlet 2 in 1, 5 pin, 15 Amp flush type univeral all as specified and directed Make: Havells/Anchor/legrand/Crabtree |
| 106 | Supply & fixiing switch piano flush type (ISI marked) single pole, one way 15 Amp 240 volts complete all as specified and direted Make Anchor/Legrand/Crabtree |
| 107 | Supply & fixiing switch piano flush type (ISI marked) single pole, one way 5 Amp 240 volts complete all as specified and direted Make Anchor/Legrand/Crabtree |
| 108 | Supply and fixing ceiling rose surface bakelite 65mm x 50 mm two to three terminals complete all as specified and directed Make Anchor/Legrand/Crabtree |
| 109 | Supply and fixing regal baten for LED Tube universal btten for G13, T8 lamps including making electric connection from ceiling rose to tube light fitting inicluding photon ultra plus LED tubelight 20W (single side connection) ultra bright LD Polycrbonate Tubelight with 10% THD with max high eficiency suited for installation in existing T8 Tubelight with G13 lamp holder to give glre three light with integrated erections driver incl taking down OIG unsv one completd all as directed by Engr-in-Charge |
| 110 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. Make : Havells/Philips/Crompton |
| 111 | S&F sheet metal enclosure for DBs SPN 4 way,with 200 amp rated bus bar Double door complete all as specified and directed. . |
| 112 | Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS 8623 III, IP 43 protection shrouded neutral lilnk & earth br and cement foil protetor, 8 way 240 Volt incl fixing on suitable size of PVC rectangular plastic laminated sheet complete all as specified and directed Make: havells/BB/Shneider/Legrand |
| 113 | Supply and fixing miniature circuit breaker (MCB) SPN 32 Amp, 240Volt, 10 KA, \"C\" curve in the MCB DB complete with connection testing and commissioning as specified and directed. |
| 114 | S&F MCB SP having breaking capacity 10KA, 6 to 32 Amps, \"C\" curve, 240 V complete all as specified and directed Make Havells/L&T/indoasian |
| 115 | S&F MCB SPN having braking capacity 10KA, 40-63 Amps, C curve 240 Vcomplete all as specified and directed. Make :- Havells/L&T/Indoasian |
| 116 | S&Fof 1100 Volts grade heavy duty ISI marked cable PVC insulatedmulti stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , ofsize 16 Smm 2 core. |
| 117 | S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections. |
| 118 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 119 | Supply and fixing lamp holder, insulated body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden boardcompleteall as specified and directed. |
| 120 | S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha0.85 (min). Make- Havells/Crompton/Syska |
| 121 | Supply and fixing LED light fitting 1 x 10 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. Make : Havells/Philips/Crompton |
| 122 | Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. Make : Havells/Philips/Crompton |
| 123 | S&F metal plug and socket assembly, SPN sheet metal enclouser with a two pin and earth plug and socket complete with one SP, MCB 20Amp \"C\" curve fixed flush to wall/other surface complete all as specified and directed. |
| 124 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm |
| 125 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, copper winding of sweep 300 mm including necessary elect connection all as specified and directed by Engr in charge. |
| 126 | S&F of new generation energy saving and environmental friendly long life LED building securitylight made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed. |
| 127 | Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inletoutlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etcincluding making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge |
| 128 | S&F for switch socket combination multiporpose 2 in 3 pi, 6 and 16 Amp flush type universal,5 in 1,240 volts all as specified and directed. |
| 129 | Supplying and fixing 1100 volt grade heavy duty cable PVC insulated aluminium conductor served with inner sheathed of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, two single core cable flat or circular multistranded 6 sqmm complete all as specified and directed |
| 130 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core |
| 131 | Material and Labour for Sand filling under the trenchesfloors or in foundations including watering and consolidation all as specified and directed. |
| 132 | Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm,factory madeof specified make , complete all as specified and directed. |
| 133 | Supply and fix Gun-metal, globe or gate valves,of size 25 mm dia with iron wheel head, screwed both endssuitable for GI Pipe for iron pipe and fixed all as specified and directed . |
| 134 | M & L for GI Pipe connection of size 25 mm dia ,Cutting existing steel tubing for alterations or additions Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) if necessarily done in position without taking down all as specified and directed. |
| 135 | M&L for PCC 1:3:6 Type C2 for mass concrete with 40 mm gradede coarse agreegete complete all as specified and as directed. |
| 136 | M&L for 100 mm thick PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in sub base flooring complete all as specified & directed. |
| 137 | Supply, installation testing & commissioning of solar Hot water system (Flat Plate Collector) based on indirect transfering of heat, thermosyphon circulation, non pressurised system of capacity 1000 LPD with suitable electric backup 3 KW on both sides including accessories including a sensor,required for autocut, dual working on solar and electricity as per manufactre design, and recommendation complete all as specified and directed.Note:- Rate of solar includs cost of electric backup, stainless hotwater tank with puf insulation and aluinium cladding 22 SWG, gauges, meters and protection device with necessary mounting, clamping of complete installation etc included in cost but does not include the cost of cold water tank, cold water piping and hot water piping |
| 138 | S & F incl leakage testing galvanised steel water tubing medium grade 40 mm dia bore with all fittings such as bends, elbow, socket, reducer etc,connecting pipe to PVC tank through connectors as required at site, laid under floor / trenches all as specified & directed. |
| 139 | S&F Gun metal stop/gate valves of 40 mm bore, (class I), ISI marked with iron wheel head, screwed both ends for iron pipe, ISI marked complete all as specified and directed . Make :- Zoloto /Jindal/Sant |
| 140 | S&F Gun metal stop/gate valves of 25 mm bore, (class I), ISI marked with iron wheel head, screwed both ends for iron pipe, ISI marked,complete all as directed . Make :- Zoloto /Jindal/Sant |
| 141 | M&L for lagging to GI pipe of 25 mm diaused inwater supply or plumbing all round with,40 mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 with 0.01mm aluminium foil wrapping over minaral wool and securing foil with screws/ clamps all as specified & directed. |
| 142 | M&L for lagging to GI pipe of 20 mm diaused inwater supply or plumbing all round with, 40mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 with 0.01mm aluminium foil wrapping over minaral wool and securing foil with screws/ clamps all as specified & directed. |
| 143 | S&F 15 mm bib tap cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge. |
| 144 | Taking down and cutting existing 40 mm GIpipe and inserting TEE 40x40x40 mm etc making connection of GI distribution branch with GI main complete all as specified and directed |
| 145 | S&F PVC water storage tanks of 5000 ltrs capacity rotational moulded (3 layered cylindrical vertical with closed top) ISI marked hoisted and fixed in position complete all as specified and directed. |
| 146 | Ball brass valves, high pressure, with polythene float and flynut complete of GI pipe of size 40 mm dia, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 147 | S&F of framed work such as grill, grating etc with end of bars houldered or riveted or forged into spikers, framed guared bar, barred iron doors, framed balusters, water tank staging and similar work confirming to Fe 290-0 Gde E-165 complete all as specified and as directed. |
