}

Tender For Supply Of Electrical Items As Per Annexure-D At Sonari Lignite Project, Rsmml, Ceu Lignite Office, Barmer - Providing & Fixing Of 240/415 V Residual Current Orcuit Breaker (Rccb) Conforming To [15:12640-1)/ Iec 61008-1 Rated & Kv Impulse Withst, Jaipur-Rajasthan

Rajasthan State Mines And Minerals Limited has published Tender For Supply Of Electrical Items As Per Annexure-D At Sonari Lignite Project, Rsmml, Ceu Lignite Office, Barmer - Providing & Fixing Of 240/415 V Residual Current Orcuit Breaker (Rccb) Conforming To [15:12640-1)/ Iec 61008-1 Rated & Kv Impulse Withst. Submission Date for this Tender is 07-02-2025. Electrical Products Tenders in Jaipur Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

47502778
Tender For Supply Of Electrical Items As Per Annexure-D At Sonari Lignite Project, Rsmml, Ceu Lignite Office, Barmer - Providing & Fixing Of 240/415 V Residual Current Orcuit Breaker (Rccb) Conforming To [15:12640-1)/ Iec 61008-1 Rated & Kv Impulse Withst
Limitted
Indian
Rajasthan
Jaipur
07-02-2025

Tender Documents

Tender Details

Tender For Supply Of Electrical Items As Per Annexure-D At Sonari Lignite Project, Rsmml, Ceu Lignite Office, Barmer - Providing & Fixing of 240/415 V Residual current orcuit breaker (RCCB) conforming to [15:12640-1)/ IEC 61008-1 rated & KV impulse withstand voltage truly current operated and shall operate on CBCT mechanism, provision for pad lock, mis operation 10.000 up to 63 A rating and 5000 for 100 A rating and minimum phase termination capacity of 35 sqmm. rigid wire, IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required RCCB 63 Amp. 4 Pole RCCB 100 Amp, 4 Pole Providing & Fixing of 150 certified company made TP&N, 415 VAC-23A front handle operated switch disconnector fuse unit, cubical type, without metallic enclosure (For Panel Mounting), as per PWD specification for electrical Works conforming to 15/IEC 60947-3:1999 in existing panel Widi HBC fases including making connections with lugs, testing etc as required SPU (Switch Fuse Unit), 63 Amp. 3 Pole with Handle Providing & Fixing of 240/415 V AC MCB with positive isolation of 10kA breaking capacity (B/C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS BH28(1996)/conforming to IEC 60898-1 2002, IEC 60947- 2, low watt lasses, trip free mechanism, energy limiting of class 3 as per IEC, minimum phase termination capacity of 35 sq.mm. conductor line load reversibility, IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 up to 20 A rating and 10.000 up to 63 A. 5000 for 80 A & above rating including making connections, testing etc. as required. Single pole MCB 6A to 32 Amp Double pole MCB 64 to 32 Amp Lightening Arrester, S/S Heavy duty 9 KV, 10 KA Pipe Earthing as per IS:3043-1987 with 3.0 Mtr Lang, 40 m dia. B class G1. Pipe 15: 1239 (Part-1) 2004, Equivalent to BS: 1387 with perforated holes of 12 mm dia including all accessories like nut, boits, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm. Bottom Dia 300 to 350 mm. and Height 250 to 300 mm and embodying the pipe complete with alternate layers salt and coke) charcoal. All as per pre approved by Engineer in charge Providing and fixing 180 cm high fencing with angle iron post size 50x50xtimm placed at every 3 meters apart and 45cm in ground embedded in cement concrete 1.3.6 [30x30x60cm) corner and every 10th post to the strutted with 50x50x6 mm angle iron provided with. 6 horizontal lines and 2diagonals of Gl. harbed wire between twn post fitted and fixed with Gl. Staples meluding each works in excavation ete complete Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/welding, jointing shall be done by overlapping and with 2 set of Brass (for Cu strip)/Gt (for G1 Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. All as per pre approved by Engineer in charge 25x3 mm copper strip 30mm x 6mm Alum. Strip Providing & Fixing of ISO Certified company made lightsing conductor finial as per PWD specification for electrical Works as per IS 2309-1989 made out of 25 mm dia 300 mm long copper solid rod having single prong at top with 85 mm dia, 3 mm thick copper base plate including holes etc. complete as required. All as per pre approved by Engineer in charge

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
INR 1.34 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Notice 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail