Tender For Item List Of Non-Schedule Items For L.I. Scheme, Minor Irrigation Division, Sahibganj, Pakur-Jharkhand

Tender For Item List Of Non-Schedule Items For L.I. Scheme, Minor Irrigation Division, Sahibganj-10/12 H.P. D.C.(PMSM/BLDC/SRM) Solar pump. Supplying Installation and Commissioning charge of Solar Module Mounting (Galvanised Steel) surface structure (for 50 kW) having Hot deep galvanised ofZinc thickness 80micron and as per IS4759 with C Channel & anti theft with nut bolt of grade SS304,which should also withstand high wind velocity upto 150km/hr or as per MNRE. 2 50kWp SPV module of 330wP or higher rating, which must have Specification as per IS 14286/IEC 61215 .The module must have to quilifyIS/IEC 61730 part I & II (or having mechanical load test of 5400Pa) for safety purpose.Module to Module wattage mismatch in SPV Array shall be +/-3% and to qualify IEC TS 62804-:2015 for the detection of potential induced degradation and warranted for output wattage not less than 90% in 10yrs and 80% at the end of 25yrs as per MNRE. 3 Arrangement of Lightening Arrestor excluding Earthing for 50kW & 5 no. of 10HP DC Solar Pump. 4 Supplying ,installation and commissioning charge of Module and Structure for 50kW. 5 Maintenance for atleast 5 years or as per MNRE guidelines for 50kW SPV and 5 nos of 10HP Solar Pump with all accessories. 6 10 H.P. D.C.(PMSM/BLDC/SRM) Solar pump set ofhaving performance with respect to Total Head,Maximum Current,Capacity,Voltage Range etc as per MNRE guidelines. 7 SPV controller/VFD integrated with GPRS,having MPPT ,Protection IP 65 or above as per MNRE to run 10HP DC Solar pump. 8 Array junction box (IP 65 or above ) as per MNRE for 50 kW SPV. 9 Miscllaneous Accessories for Installation of 10H.P.D.C. Solar Pump 10 Solar cable 4 mm2usedas per IS 694 or as per MNRE. 11 copper cable 25 mm2 used as per IS 694 or as per MNRE. 12 Materials for water supply work. 4 dia M.S. pipe TATA (C-Class) 13 6 M.S. pipe TATA(C-Class) 14 10M.S. PipeTATA (C-Class) 15 4 dia G.I. Flange 6mm thick.(I.S.I. Standard) 16 4x 8/10 Reducerthickness 6mm(I.S.I. Standard) 17 10(250mm) M.S. Flange 6mm thick.(I.S.I. Standard) 18 10(250mm) M.S. bend 6mm thick.(I.S.I. Standard) 19 4 M.S. Tee 6mm thick.(I.S.I. Standard) 20 4 PVC Tail piece.(I.S.I. Standard) 21 4 M.S. bend 6mm thick.(I.S.I. Standard) 22 4 M.S. Ball Valve(I.S.I. Standard) 23 4 dia G.I. pipe TATA (C-Class) 24 6 G.I. pipe TATA(C-Class) 25 10 G.I. PipeTATA (C-Class) 26 4 dia G.I. Flange 6mm thick.(I.S.I. Standard). 27 4x 8/10G.I. Reducerthickness 6mm(I.S.I. Standard) 28 10 (250mm)G.I. Flange 6mm thick.(I.S.I. Standard) 29 10 (250mm) G.I. bend 6mm thick.(I.S.I. Standard) 30 4 G.I. Tail piece.(I.S.I. Standard) 31 4 G.I. Ball Valve.(I.S.I. Standard) 32 4 D.I. Tee (I.S.I. Standard) 33 4 D.I. Tail piece.(I.S.I. Standard) 34 4 D.I. bend(I.S.I. Standard) 35 4 D.I. Ball Valve.(I.S.I. Standard) 36 HDPE Fittings(Confirming IS 4984/14151/12788/13488) Suitable for HDPE pipe of Material grade-PE80-PN10. HDPE TEE(Dia. in mm). 100 mm. 37 150 mm. 38 250 mm. 39 HDPE AIR RELESE VALVE. 100 mm. 40 150 mm. 41 250 mm. 42 HDPE Tail piece. 100 mm. 43 150 mm. 44 250 mm. 45 HDPE bend 45 Degree. 100 mm. 46 150 mm. 47 250 mm. 48 HDPE bend 90 Degree. 100 mm. 49 150 mm. 50 250 mm. 51 HDPE REDUCER. 100 mm. 52 150 mm. 53 250 mm. 54 HDPE END CAP. 100 mm. 55 150 mm. 56 250 mm. 57 HDPE FLANGE. 100 mm. 58 150 mm. 59 250 mm. 60 HDPE DRESSER COUPLER. 100 mm. 61 150 mm. 62 250 mm. 63 HDPE BALL VALVE. 100 mm. 64 150 mm. 65 250 mm. 66 HDPE GATE VALVE. 100 mm. 67 150 mm. 68 250 mm. 69 Solvent Cement(Pidilite)(I.S.I. Standard) 70 M-Seal Epoxy compound (Pidilite) 71 Add 18% GST (In Basic Rate must fill 18) 72 Add 1% Labour Cess (In Basic must Rate fill 1)

Refer document

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB