Various Civil Works In Luv Kush Vatika Samai Mata Range Banswara - Earth work in excavation/ by mechanical means (Hydraulic Excavator) manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed: Ordinary ruck Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of contering and shuttering - All work up to pliath level. MIO grade Nominal Mix 1:3:6 (1 cement: 3 course sand: 6 graded stone aggregate 1 20mm nominal size). Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 (1-Cement: 6-Sand). Providing and fixing up to floor five level pre cast cement concrete string or lacing courses, copings, bed plates, anchor blocks, windows sills, shelves, louvers steps, staircases, etc. including carriage, hoisting and setting in position with cement mortar 1:3 (1 cement: 3 coarse sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surface, including all T & P, curing etc. complete: M15 grade Nominal Mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Plaster on new surface on walls in cement sand mortar 1:4 Including racking of joints etc. complete fine finish: 25 mm thick. Finishing with neat cement (punning). Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft hases of columns etc. Centering & shuttering with plywood or steel sheets including strutting, propping bracing hoth ways with steel Columns, pillars, posts and struts etc. Providing and laying in position specified grade of cement coticrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 prade Nominal Mix / Desten Mix Earth work in excavation by mechanical means (Hydraulic excavator) manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and liff upto 1.5 m, disposed earth to be levelled and neatly dressed: AB kinds of soll Maxican (Carpet) grass tiles (2X2 size) for development of garden, including levelling of soil and spreading of manure Supply of dry manure including loading unloading.transportation & stacking at site. Compost Coarse sand (zone III) Stone chippings/screenings 4.75 mm nominal size Brick work in partition in super structure upto five storey 7cm, thick (brick on edges) using bricks of class designation 75 in: Cement mortar 1:3(1 cement: 3 coarse sand) Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to 15:1786) Thermo-mechanically Treated hars (Conforming of relevent IS code) Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 14 (1) cement: 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) with 10% fimely grounded hydrated lime by volume of cement Extra for plastering done on moulding comices or architraves including neat finish to line and level: In one coat Wall painting with Royal Play point with various types of designs as approved of approved brand and manufacture to give an even shade including all scaffalding. Two or more coats on New work including preparation of base with primer, putty lippy etc. Complete in all respect. Spray painting in approved shade and approved quality with Duco paint of required colour to give even shade with two or more couts by compressor including sand papering, NC putty filler coat etc complete in all respect as per design given by Engineeer incharge on new work. SITC of Dewatering Submersible Motor Pump set, motor should be iEZ class as per IEC 60034-2-1: 2007, IEC 60034-30:2008, 512615:2011, with SS Impeller, body, shaft, mechanical seal itc. jas requirest. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL/CPRI/ERDA accrediated lab тури test certificate before execution. All as per pre approved by Engineer in charge For additional technical parameters of products/ work. refer Annexure A attached with this 85 3.0 HP 3-0, 15-20M, 1810-126) LPM Providing & Fixing of HDPE pipe Confirming το 15:4984:2021 for water supply suitable for submersible & jet pump with requited fittings le sockel, elbows, tee etc. complete in all respect. All as per pre approved by fingineer in charge. For additional technical parameters of products/ work refer Annexure A attached with this 858 for vertical installation 150 mm OD 6kg/cm2 Providing and laying in position cement concrete including curing, compaction dic complete in specified grade excluding the cost of centering and shuttering All work up to plinth level. M15 grade Nominal Mix 1:2:4 (1 coment: 2 course sand 4 graded stone aggregate 20mm nominal size). Providing and laying of paver block an per 18 15658:2006 (Indian standard for precast concrete block for paving-specification) and IRC SP-63-2004 (guidelines for the use of interlocking concrete block pavement) M-35.00mm thick to be used in light traffic (Light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 KN laden weight, or an equivalent up to 0.5 million standard axles (MSA) for a design life of 20-years A standard asle is defined as a single axle load of 816 KN ilke pedestrian plazas, shopping complexes ramps, car parks, office driveways bousing colonies, office complexes, rural roads with low volume traffic, farm housen heach sites, sourist resorts, local authority footways residential roads, etc. Category A Denated units to key into each other on four faces zigrag shape as per IRC SP 63:2004
