|
| 1 | Dismantling of UG cable any size duly disconnecting all electrical connections including taking down all accessories complete all as specified & directed. |
| 2 | Supply, laying, jointing and testing XLPE insulated, PVC bedded, Galvanized steelstrip or wire armoured underground heavy duty electric power cable with stranded aluminum conductor 1100 volts grade, laid in trenches/ duct/ on pole including all necessary fixing arrangement such as lugs, glands end termination etc of cross sectional area 35 Sqmm 3.5 core complete all as specified and directed. |
| 3 | All as per item No - 02.00 here in above but of size 50 Sqmm x3.5 core complete all as specified and directed. |
| 4 | All as per item No-02.00 here in above but of size 70 Sqmm x3.5 core complete all as specified and directed. |
| 5 | All as per item No-02.00 here in above but of size 95 Sqmm x3.5 core complete all as specified and directed. |
| 6 | All as per item No-02.00 here in above but of size 120 Sqmm x3.5 core complete all as specified and directed. |
| 7 | Excavation in trenches, not exceeding 1.50m wide and not exeeding 1.50m in depth for foundations, trenches of cable or pipe lines etc or and getting out in soft/ loose soil complete all as specified and as directed. |
| 8 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed. |
| 9 | Removing excavated materials (soil) to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and directed. |
| 10 | M&L for sand cushioning with coarse sand in trenches for protection of underground electric cable, spread to uniform 23 cm thickness and punned down gently to 18 cm after spreading over the cable complete all as specified and directed. Note : Punned thickness shall be measured. |
| 11 | Supply and laying well burnt sub class \"B\" old size bricks, laid flat dry, in trenches with width of the bricks laid to the axis of cable for cable protection complete all as specified and as directed. |
| 12 | M&L for Cleaning the area including uprooting of weeds/grass and removing creepers from fencing or poles/ posts and brooming the complete area of sub stationaround panels, transformers and four pole structures all as specified & directed. |
| 13 | S & F in repair GI pipe “Light Grade” in trenches, under floors, roads, along poles or walls including suitable size clamps for protection of cables and sealing ends complete all as specified for the following sizes of pipes :- |
| 14 | (a) 50 mm bore |
| 15 | (b) 80 mm bore |
| 16 | Dismantling of steel pole/struts of any size & type duly disconnecting all electrical connections including taking down cross arms/ ACSR conductors etc. complete all as specified & directed. |
| 17 | Supply, erecting and fixing in true vertical position GI poles complete with GI base plate, finial taper plug,bolts,nuts & screws as specified type 410 SP-31 (9.0 metres long), including earthwork for 60x60cm pit of 1.65m depth and PCC 1:4:8 type D2 bed 15cm at bottom and PCC 1:3:6 type C2 till ground level and PCC 1:2:4 type B1 for coping above ground for 30cm including removal of excavated earth to a distance n.exc 50m and depositing complete all as specified and directed. |
| 18 | Dismantling of MCCBs ofany size any type duly disconnecting all electrical connections including taking out all accessories complete all as specified & directed. |
| 19 | S & F MCCB 63 Amps, 4 Pole, 16 KA breaking capacity, Adjustable Thermal & Adjustable magnetic setting complete all as specified and directed. |
| 20 | All as per item No 17.00 above but with fixed thermal and magnetic type. |
| 21 | S & F MCCB 100 Amps, 4 Pole, 16 kA breaking capacity,\"A\" Frame size, Adjustable Thermal & Fixed magnetic setting complete all as specified and directed. |
| 22 | All as per item No 19.00 above but with fixed thermal and magnetic type. |
| 23 | S & F MCCB 125 Amps, 4 Pole, 25 kA breaking capacity,\"A\" Frame size, Adjustable Thermal & Adjustable magnetic setting. |
| 24 | All as per item No 21.00 above but with fixed thermal and magnetic type complete all as specified and directed. |
| 25 | S & F MCCB 160 Amps, 4 Pole, 25 KA breaking capacity, Adjustable Thermal & Adjustable magnetic setting complete all as specified and directed. |
| 26 | All as per item No 23 above but with fixed thermal and magnetic type. |
| 27 | S & F MCCB 200 Amps, 4 Pole, 35/36 KA breaking capacity, Adjustable Thermal & Adjustable magnetic setting complete all as specified and directed. |
| 28 | All as per item No 25.00 above but with fixed thermal and magnetic type. |
| 29 | S & F MCCB 250 Amps, 4 Pole, 35/36 KA breaking capacity, Adjustable Thermal & Adjustable magnetic setting complete all as specified and directed. |
| 30 | All as per item No 27.00 above but with fixed thermal and magnetic type. |
| 31 | S & F MCCB 350 Amps, 4 Pole, 36 KA breaking capacity, Adjustable Thermal & Adjustable magnetic setting complete all as specified and directed. |
| 32 | M & L for increasing height of existing LT panel after disconnecting exist incoming/ ougoning cables of any size and specification of earthing, earthwork are demolishing of existing PCC foundation taking out existing place and refixing the existing LT panel/UG cable/MCCBs by increasing the height of PCC foundation of existing panel including 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.Note : PCC for foundation will be measured and paid seperately |
| 33 | S&F Surge protection device TP+N, 320V, 20kA to be fixed in LT panel boards complete all as specified and as directed. |
| 34 | S&F MCB, SPN DB, 8 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars, earth bar, neutral links complete including blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed including dismentling taking down unsvericeable one complete all as specified and directed. |
| 35 | S&F MCB, SPN DB, 12 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars, earth bar, neutral links complete including blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed including dismentling taking down unsvericeable one complete all as specified and directed. |
| 36 | S&F VTPN DB, MCCB incomer, 4 ways double door, Metal door, IP-43 IK 09 in 250A rated copper bus bars,earth bar,neutral links, no. of module DPX 250+12complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces including taking down old unsv ones complete all as specified and directed. |
| 37 | S&F VTPN DB,MCCB incomer, 8 ways double door,Metal door, IP-43 IK 09 in 250A rated copper bus bars, earth bar, neutral links, no. of module DPX 250+24complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces including taking down old unsv ones complete all as specified and directed. |
| 38 | M&L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level, connected to galvanised earth lead of GI strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note :- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50mm thick reinforced with 8mm dia TMT bar @ 140mm C/C both ways, 10mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc. |
| 39 | Dismantling and removing existing U/S LT Panel board , indoor/outdoor type from any site after disconnectingelectrically incl removal from site and making good of disturbed surface complete all as specified and directed. |
| 40 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 600 Amp copper bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories. |
| 41 | IN COMING :-(a) MCCB four pole 415 Volts AC Supply 400 Amp, open execution, thermal magnetic release type, breaking capacity 36 KA - 01 Nos. (b) Change Over on load front operated type four pole 415 Volts AC Supply 400 Amp, open execution, thermal magnetic release type, breaking capacity 36 KA - 01 Nos. (c) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-400 Amps) and frequency - 01 No(d) RYB LED indicating lamp panel mounting type (Set of three) - 01 No.OUT GOING :-(a) MCCB 4 Pole 415 Volts, 250 Amp, 25 KA rating, open execution, thermal magnetic release type-01 Nos.(b) MCCB 4 Pole 415 Volts, 200 Amp, 25 KA rating, open execution, thermal magnetic release type-02 Nos.(c) MCCB 4 Pole 415 Volts, 160 Amp, 25 KA rating, open execution, thermal magnetic release type-02 Nos.(d) MCCB 4 Pole 415 Volts, 63 Amp, 16 KA rating, open execution, thermal magnetic release type-02 Nos.(e) MCB SPN 6-32 A, 240 Volts, \"C\" curve, 10 KArating thermal magnetic release type-04 Nos. |
| 42 | Dismantling and removing of existing U/S LT Panel board/Feeder pillar box , indoor/outdoor type from any site after disconnectingelectrical acces such as any type of cable, MCCBs/MCBs and Volt/ammeter removal from site and making good of disturbed surface complete all as specified and directed. |
| 43 | Supply, install, commissioning and testing LT Main panel as per suitable size, indoor with canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 1275 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories (LT Main Panel) :- |
| 44 | IN COMING :-(a) ACB-850 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos. (b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-850 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No.OUT GOING :-(a) MCCB-320 Amp, 4 pole, 36KA Adjustable Thermal & Adjustable Magnetic setting, 415 V, 50 Hz AC - 01 Nos(b)MCCB-250 Amp, 4 pole, 25KA Adjustable Thermal & Adjustable Magnetic setting, 415 V, 50 Hz AC - 01 Nos.(c) MCCB-100 Amp, 4 pole, 25KA Adjustable Thermal & Adjustable Magnetic setting, 415 V, 50 Hz AC - 02 Nos.(d) MCCB-63 Amp, 4 pole, 16KA Adjustable Thermal & Adjustable Magnetic setting, 415 V, 50 Hz AC - 02 nos.(e) MCB SPN 6-32 A, 240 Volts, \"C\" curve, 10 KArating thermal magnetic release type-06 Nos. |
| 45 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 375 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories (LT Feeder Pillar Box No 1) :- |
| 46 | IN COMING :-(a) MCCB-320 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos. (b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-850 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. |
| 47 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 100 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories (LT Feeder Pillar Box No 2) :- |
| 48 | IN COMING :-(a) MCCB-63 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos.(b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-63 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. |
| 49 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 300 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories (LT Feeder Pillar Box No 1(A)) : - |
| 50 | IN COMING :-(a) MCCB-200 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos. (b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-200 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. |
| 51 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 300 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories (LT Feeder Pillar Box No 1(B)) :- |
| 52 | IN COMING :-(a) MCCB-200 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos. (b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-200 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. |
| 53 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 60 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories (LT Feeder Pillar Box No 1(C)) :- |
| 54 | IN COMING :-(a) MCCB-40 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos. (b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-40 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. |
| 55 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 240 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories (LT Feeder Pillar Box No 1(D)) :- |
| 56 | IN COMING :-(a) MCCB-160 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos. (b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-160 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. |
| 57 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 188 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories (LT Feeder Pillar Box No 1(E)) :- |
| 58 | IN COMING :-(a) MCCB-125 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos. (b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-125 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. |
| 59 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 188 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories. (LT Feeder Pillar Box No 1(F)) |
| 60 | IN COMING :-(a) MCCB-125 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos(b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-125 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. |
| 61 | Supply, install, commissioning and testing LT feeder pillar box as per suitable size, outdoor with slopping canopy at top, manufactured by a CPRI approved factory, self supporting structure and compartmentalized type, dust & weather proof, protection IP 55, front and rear operated double doorwithnecessary locking arrangement made of 50x50X6mm, with four legs grouted to PCC (1:2:4) type B1 MS angle iron frame work and CRCA sheetof 3.15 mm thick duly phosphating process and treatment of panel with anti-corrosive zinc based primer paint and finally powder coating the panel, after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase,4 wire system and shall be complete with suitable capacity 150 Amp aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles, glands and complete wiring arrangement suitable to equiped complete with earthing terminals comprising of the following accessories. (LT Feeder Pillar Box No 1(G)) |
| 62 | (A) IN COMING :-(a) MCCB-100 Amp, 4 pole, 415 Volt, Manual draw out type with microprocessor release of capacity- 01 Nos. (b) Digital Voltage Meter (0-500 Volts), Ammeter with CTs and selector switch (0-100 Amps) and frequency - 01 No(c) RYB LED indicating lamp panel mounting type (Set of three) - 01 No. |
