Tender For Annual Rate Contract For Strengthening Of Various Storage Rwr In Sub Division Ramgarh - 1 Pwd Bsr 2022 2 3.1 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost O, jaisalmer-Rajasthan

Tender For Annual Rate Contract For Strengthening Of Various Storage Rwr In Sub Division Ramgarh - 1 PWD BSR 2022 2 3.1 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 3 6.1 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 4 12.1 Plaster on new surface on wall in cement sand mortar 1:3including racking of joints etc. complete fine finish 25 mm thick 5 9.30 150 cm high fencing of precast R.C. posts of 15cmx15cm tapered to 10x10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth posts to be strutted with same R.C. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete 6 12.3 SINGLE FLAT BRICK LINING WITH 250 MICRON LDPE FILM:- Preparing surface levelled & dressed to proper slope & laying over it on sand properly rammed and watered in 2 Layers of 5 cm each. Providing and laying 250 micron LDPE filmas per ISS:2506-1984 including overlapping on the finished surface of compactedsand. Over LDPE film 15 mm thick cement sand mortar 1:3 shall be provided and laid which shall be cured properly. Over the base mortar single layer Ist class brick lining incement sand mortar 1:3 shall be provided with joints not more than 8 mm wide and curing shall be done for 14 days. This also includes providing weedicides & anti-termite treatment, complete work as per technical specifications. 7 Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamel paints.

INR 500 /-

INR 15000.0 /-

INR 7.50 Lakhs /-