Tender For The Supply And Installation Of Open Gym At Ernakulam , E-Tender For The Supply And Installation Of Open Gym At Ernakulam , Abdominal Board/Hyper Extension Rower – Providing And Fixing Using, Minimum 80 Nb Gi B-Class Pipe For Main Frame, Minimum 32 Nb Gi B-Class Pipe For Side Frame, Minimum 25 Nb G.I. Pipes For Intermediate Pipe, Nylon 66 Injection Moulded Bearing Cap & Pipe Cap, Fully Done By First Coat Of Primer – Jotun Brad 40-50 Micron Thickness And Top Coat Of Pure Polyester Powder With 70- 80 Micron Thickness Powder Coatincluding Cost Of Concrete Foundation , All Materials, Labour, Etc All Complete As Per The Instruction Of Engineer In-Charge , . Exer Cycle - Providing And Fixing Cycle Using, 25 Nb & 40 Nb Gi B-Class Pipe For Main Frame, 32 Nb Gi B-Class Pipe For Seat Frame, 25 Nb Gi B-Class Pipe For Handle Frame, Nylon 66 Injection Moulded Bearing Cap & Pipe Cap, Fully Done By First Coat Of Primer – Jotun Brad 40-50 Micron Thickness And Top Coat Of Pure Polyester Powder With 70- 80 Micron Thickness Powder Coat Including Cost Of Concrete Foundation , All Materials, Labour, Etc All Complete As Per The Instruction Of Engineer In-Charge , Elliptical Trainer - . Providing And Fixing Using, Minimum 100 Nb G.I. C Class Pipes For Main Frame, Minimum 40 Nb G.I. Pipe For Foot Rest Pipe, Minimum 40Nb & 25 Nb G.I. Pipe For Handle, Minimum 25 Nb & 40 Nb Gi B-Class Pipe For Connecting Pipe, Lldp Rotomoulded Seat With Inbuilt Bolts 3/8 X 1.5 For Foot Rest, Nylon 66 Injection Moulded Bearing Cap & Pipe Cap, Fully Done By First Coat Of Primer – Jotun Brad 40-50 Micron Thickness And Top Coat Of Pure Polyester Powder With 70- 80 Micron Thickness Powder Coat Including Cost Of Concrete Foundation , All Materials, Labour, Etc All Complete As Per The Instruction Of Engineer In-Charge , Air Walker - Providing And Fixing Walker Single - Using, Minimum 100 Nb Gi C-Class Pipe- For Main Frame, Minimum 32 Nb Gi B-Class Pipe- For Leg Frame, Minimum 25 Nb Gi B-Class Pipe For Handle Frame, Nylon 66 Injection Moulded Casing Clamps,Lldp Rotomoulded Seat With Inbuilt Bolts 3/8 X 1.5 Foot Rest, Nylon 66 Injection Moulded Bearing Cap & Pipe Cap, Fully Done By First Coat Of Primer – Jotun Brad 40-50 Micron Thickness And Top Coat Of Pure Polyester Powder With 70- 80 Micron Thickness Powder Coat Including Cost Of Concrete Foundation , All Materials, Labour, Etc All Complete As Per The Instruction Of Engineer In-Charge , Bench With Fixed Weight - Providing And Fixing Bench With Fix Weight Using, 100 Nb G.I C-Class Pipe For Main Frame, 32 Nb G.I B-Class Pipe For Bench Frame, 20 Nb G.I B-Class Pipe For Handle Frame, Fully Done By First Coat Of Primer – Jotun Brad 40-50 Micron Thickness And Top Coat Of Pure Polyester Powder With 70- 80 Micron Thickness Powder Coat Including Cost Of Concrete Foundation , All Materials, Labour, Etc All Complete As Per The Instruction Of Engineer Incharge , Standing Twister Tripple - – Providing And Fixing Using Minimum 100 Nb Gi C-Class Pipe For Main Frame, Minimum 25 Nb Gi B-Class Pipe For Handle Frame, Lldp Rotomoulded Seat With Inbuilt Bolts 3/8 X 1.5 For Twister Disc, Minimum 25 Nb & 20 Nb Gi B-Class Pipe For Seating Frame, Minimum 80 Nb Gi B-Class Pipe For Seatingframe Stand, Minimum 80 Nb Gi B-Class Pipe For Twister Stand, Minimum 25 Nb Gi B-Class Pipe For Twister Handle Frame, Lldp Plastic- Twister Disc, Nylon 66 Injection Moulded Bearing Cap & Pipe Cap, Fully Done By First Coat Of Primer – Jotun Brad 40-50 Micron Thickness And Top Coat Of Pure Polyester Powder With 70- 80 Micron Thickness Powder Coat Including Cost Of Concrete Foundation , All Materials, Labour, Etc All Complete As Per The Instruction Of Engineer In-Charge , Leg Press/Leg Exercise - Providing And Fixing Using Minimum 100 Nb Gi C-Class Pipe For Main Frame 100 Nb Gi Bclass Pipe Leg Frame : 32 Nb Gi B Class Pipe Handle Frame : 25 Nb Gi B Class Pipe Clamps :Nylon 66 Injection Moulded Casing Foot Rest : Lldp Rotomoulded Seat With Inbuilt Bolts 3/8”X1.5’.Pipe Cap : Nylon 66 Injection Moulded.Bearing Cap :Nylon 66 Injection Moulded. Bearing Housing And Pin – Seamless Pipe And Round Ba Bearings : Permanent Sealed Of Reputed Make (Fag/Skf) Powder Coat : Done By Pure Polyester Powder With 70-80 Micron Thickness Powder Coat Including Cost Of Concrete Foundation , All Materials, Labour,Etc All Complete As Per The Instruction Of Engineerin-Charge , Pull Ups/Hand Exercise- Rproviding And Fixing Using Minimum 100 Nb Gi C-Class Pipe For Main Frame Galvanised Steel, Fastners :Stainless Steel 304 Grade With Polycaped Post Top Cap : G.I. Post Of Wall Thickness 3Mm Handle Frame Size : 32Mm/1.25” Od Gi Post Of Wall Thickness 3 Mm Powder Coat : Done By Pure Polyester Powder With 70-80 Micron Thickness Powder Coat Including Cost Of Concrete Foundation , All Materials, Labour, Etc All Complete As Per The Instruction Of Engineer In-Charge , Hand Rower/Rower - Providing And Fixing Rider - Using, Minimum 100 Nb Gi C-Class Pipe- For Main Frame, Minimum 32 Nb Gi B-Class Pipe For Seat Frame, Minimum 40 Nb & 25 Nb B Class Gi B-Class Pipe For Handle Frame, Minimum 32Nb & 25Nb Gi Bclass Pipe With Two Handles For Leg Rest, Lldp Rotomoulded Seat With Inbuilt Bolts 3/8 X 1.5 For Foot Rest & Seat Rest, Nylon 66 Injection Moulded Bearing Cap & Pipe Cap, Fully Done By First Coat Of Primer – Jotun Brad 40-50 Micron Thickness And Top Coat Of Pure Polyester Powder With 70- 80 Micron Thickness Powder Coat Including Cost Of Concrete Foundation , All Materials, Labour, Etc All Complete As Per The Instruction Of Engineer Incharge , Chest Press Cum Shoulder Press- Chest Press Cum Shoulder Press – Providing And Fixing Using Minimum 100 Nb Gi C -Class Pipe For Main Frame 100 Nb Gi Bclass Pipe Leg Frame : 32 Nb Gi B Class Pipe Handle Frame : 25 Nb Gi B Class Pipe Clamps :Nylon 66 Injection Moulded Casing Foot Rest : Lidp Rotomoulded Seat With Inbuilt Bolts 3/8”X1.5’.Pipe Cap : Nylon 66 Injection Moulded. Bearing Cap :Nylon 66 Injection Moulded. Bearing Housing And Pin – Seamless Pipe And Round Ba Bearings : Permanent Sealed Of Reputed Make (Fag/Skf) Powder Coat : Done By Pure Polyester Powder With 70-80 Micron Thickness Powder Coat Including Cost Of Concrete Foundation , All Materials, Labour, Etc All Complete As Per The Instruction Ofengineer Incharge . Horse Rider –Product Dimension L97cm(302Ft)*W 55 Cm(1.8Ft)*H120 Cm(4Ft) Material- Galvanized Steel Fastners-Stainless Steel 304 Grade With Polycapedpost Top Caphigh Density Aluminium Sitting Seat Polyethylene.Handle Grips-Hd Rubber Coatedpostsize- 115Mm/4.5”Od G.I Post Of Wall Thickness 3Mm Powder Coating-80 Micron Akzo Nobel Electrostatic Coated Area Required-Length 150Cm(5Ft)*Width 150Cm(5Ft)
