Tender For Provision Of 6Xseptic Tanks At Various Locations Of 12Rr Under Age (I) Bhalra; 1 Excavation over areas not exc. 1.5m deep in any type of soil and getting out,complete all as specified and as directed. 2 Excavation over areas exc. 1.5m deep and n. exc 3m deep in any type of soil and getting out,complete all as specified and as directed. 3 Excavation in trenches n exc 1.5m wide and n exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, complete all as specified. 4 M&L for broken stone Hardcore of gauge n exc 63 mm, deposited , spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface in broken Stone/boulders as specified and as directed. 5 M&L for broken bricks Hardcore of gauge n exc 63 mm, deposited , spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface in broken brick bats as specified and as directed. 6 Material and labour for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, all as specified. 7 Material and labour for brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4, complete all as specified. 8 Material and labour for brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified. 9 Material and labour for brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:3, complete all as specified. 10 M&L for rendering 20 mm thick in CM 1:3 on fair face of brick work surfaces finished even and smooth without using extra cement and using water proofing compound @ 3% by weight of cement contentcomplete all as specified and directed.Note :- WPC will measuered and paid separatly under relevant item of schedule.all as specified. 11 Supply only integral water proofing compound, complete all as specifed. 12 Material and labour for rendering 15 mm thick in CM 1:4 on fair face of brick work surfaces finished even and smooth without using extra cement, complete all as specified. 13 Material and labour formild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. 14 Material and labour formild steel for TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. 15 Material and labour for Mild steel work as in bands, straps, supports or stays for rain water, vantilating pipes including bolts, if required, bolt hooks (stay), heavy for large gates; hook and pintle hinges; large hasp and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, conforming to Fe-290 grade-E-165, complete all as specified. 16 Material and Labour for precast cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in landings, cover slabs (for manhole etc.), and similar articals with plain faces, set in cement mortar 1:4 complete all as specified & directed. 17 Material and Labour for for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement including forms moulds, mitred/stopped ends etc complete all as specified and directed. 18 Material & labour for Cutting in to existing manholes forconnecting drain pipes making good to pipe and rendering cutting out existing benches for and forming branch channel (1/2 round or 3/4 section)in cement concrete (1:2:4) type B1 smooth finished and reforming benching as required for 150 mm internal bore pipe complete all as specified.. 19 Supply and fixing of 110mm bore PVC (SWR) bends any radius with or without excess door, complete all as specified. 20 Supply and fixing of 110mm bore PVC (SWR) bends any radius, complete all as specified. 21 Supply and fixing of PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in trenches or floor and fixed to walls, fixed in repair, complete all as specified and directed. 22 Supply and fixing of 75mm bore PVC (SWR) bends any radius, complete all as specified. 23 Supply and fixing of PVC (SWR) 110mm bore vent cowl, complete all as specified. 24 Supply and fixing of PVC (SWR) 75mm bore vent cowl, complete all as specified. 25 Material and labour for stone walling of random rubble with best quality locally available harder stone such as granite, trap or basalt, brought upto courses, well bonded, bedded, solidly hearted and built in cement mortar 1:6, complete all as specified & directed. 26 Material and Labour for PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in precast bond stones, set in cement mortar 1:6, including all necessary form work, complete all as specified & directed. 27 Extra over stone walling of granite, trap or basalt stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 20mm, complete all as specified & directed. 28 Material and labour for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4, complete all as specified. 29 Material and labour for PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified. 30 Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified. 31 Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.
