Tender For Supply Of Belt Feeder And Belt Conveyor Of Raw Coal Feeder For 5X200mw Units, Btps, Obra, Sonebhadra , Vulcanized Endless Rubber Belt Conveyor For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 3400Mm±10 Mm (I, obra-Uttar Pradesh

Supply Of Belt Feeder And Belt Conveyor Of Raw Coal Feeder For 5X200mw Units, Btps, Obra, Sonebhadra , Vulcanized Endless Rubber Belt Conveyor For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 3400Mm±10 Mm (Inner Circumference: 3410 To 3390) 2. Width: 838Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 400 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum# 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt. , Vulcanized Endless Rubber Belt Feeder For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 5025Mm±20 Mm (Inner Circumference: 5045 To 5005) 2. Width: 830Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 400 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies: Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt. , Vulcanized Open Ended Zip Rubber Belt Feeder For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 5025Mm±20 Mm (Inner Circumference: 5045 To 5005) 2. Width: 830Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 400 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt. , Vulcanized Open Ended Zip Rubber Belt Feeder For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 5025Mm±20 Mm (Inner Circumference: 5045 To 5005) 2. Width: 830Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 450 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt. , Vulcanized Endless Rubber Belt Feeder For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 5025Mm±20 Mm (Inner Circumference: 5045 To 5005) 2. Width: 830Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 450 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies: Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt.

INR 1180 /-

INR 25000.0 /-

INR 16 Lakhs /-