|
| 1 | Supply & fixing steel tubular pole 9 Metre long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. all complete with ligh fixing arrangement. |
| 2 | Supplyandlaying of 10 sq. mm 4 core aluminium conductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 3 | Deduct in item no. 501 (I) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required. |
| 4 | Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. |
| 5 | Supply & erection of \"D\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. |
| 6 | Supply & fixing of 230 mm x 32 mm x 1.5 mm galvanised steel strips including holes for shakcle insulators pins andbolts etc. complete in all respect. |
| 7 | Supply & fixing of75 mm x 90 mmshackle insulator /100 mm x 65 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect. |
| 8 | Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 60 watt to 72 Watt. Confirming to IP 65/66 Protection having company LOGO engraved complete in all respect including labour. CAT - AAA.12100-14300 system lumens high power LED with lenses, > 110lm/W, PF>0.95, THD<10% at full load, CRI>70, potted driver set (Not circuitory), phase to phase protection at 440 V & > 300V auto cut and re-start feature, with 5 year warrantee. |
| 9 | Supply and fixing 40 A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. |
| 10 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 11 | Making suitable earthing of ST/Rail Pole with 2.5 M long 20 mm dia M.S Rod with 7/16 SWG GS wire in 15 mm dia 2.0 M long GI pipe duly clamped with 2 nos. of clamps and binding on pole including cost of labour & T&P etc required for proper completion of work. |
| 12 | Supply and Wiring of submains with two nos. of 2.5 sq. mm. FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T & P required for proper completion of the work as directed at site by Engineer in charge. |
| 13 | Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator,19 mm 600 mm double screw tightener,7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in allrespect. |
| 14 | Supply and fixing of heavy duty cadmium plated Two way copper connector HKM 100 with end plate complete in all respect. |
| 15 | Supply and fixing of 1 mtr. 40 mm. dia. G.I. pipe bracket with pole cap suitable for 9 mtr. S.T. pole all complete required for proper completion of work as per direction of E./Ic. |
