Tender For Internal Electrification In A Type Shop 08 Nos Extention Of Lt Line And Cabling Work At Nmy Jaunpur - Wiring Point For Light With 1.5 Sq.Mm.Frlshpvcinsulated Multistrand Single Core Copper Conductor Cablein Pvc Condute Pipepartly Concealed In, varanasi-Uttar Pradesh

Tender For Internal Electrification In A Type Shop 08 Nos Extention Of Lt Line And Cabling Work At Nmy Jaunpur - Wiring point for light with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cablein PVC condute pipepartly concealed in the walland partly laidinslab alongwith the reinforcement before concreting, with 1.5 sqmm FRLSH PVC insulated multi stand copper conductor cable as earth wire drawn insidecomplete with GP Box , Piano type switch & ceiling rose/angle/batten holder on 3mm thickphenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. 138(c) 2 Wiring point for fan/fresh air fan (light duty exhuast fan) with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cablein PVC condute pipepartly concealed in the walland partly laidinslab alongwith the reinforcement before concreting, with 1.5 sqmm FRLSH PVC insulated multi stand copper conductor cable as earth wire drawn insidecomplete with GP Box , Piano type switch & ceiling rose/angle/batten holder on 3mm thickphenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. 140(c) 3 Wiring point for Plug with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cablein PVC condute pipepartly concealed in the walland partly laidinslab alongwith the reinforcement before concreting, with 1.5 sqmm FRLSH PVC insulated multi stand copper conductor cable as earth wire drawn insidecomplete with GP Box , Piano type switchon 3mm thickphenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. 141(c) 4 Add for light / fan points with modular type switch in place of piano type switch. 187(a) 5 Add for plug point with modular switch & socket in place of piano type switch & socket. 187(c) 6 Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thickISI Marked G.P.sheet spot welded Four to Eightholes for pipe entryof the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concretingalongwith supply of all material, labour, T&P etc. required for proper completion of the work. 1149 7 Supply and fixing ofwater tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in allrespect. CAT- AAA23.11 8 S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve 1002 9 S&F of6 Amp. to 32Amp. DP MCB (10 KA) C Curve 1009 10 S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directedbyEngineer in charge. 1024(a) 11 Supply and fixing of power plug with 20 Amp./250 voltflush type modular switch and 5 pin 20 A/250 volt flush type universal modular socketswitch on concealed M.S boxincluding supply of all material, labour T&P etc. required for proper completion of work. 1139(a) 12 Supply and wiring of submain withtwo number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit concealedin wall, complete with one No. 2.5 sqmm FRLSH PVC insulatedmulti stand copper conductor cable as earth wire drawn in conduit including matching colour wash etc. complete in all respect. 216(c) 13 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) 725(a) 14 Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 616 15 Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. 634 16 Supply & erection of D clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. 623 17 Supply & fixing of 100 mm x 110 mmshackle insulator /100 mm x 80 mm pin insulator including G.I. Bolts / spindlenuts etc. complete in all respect. 621 18 Supply & fixing of 230 mm x 32 mm x 1.5 mm galvanised steel strips including holes for shakcle insulators pins andbolts etc. complete in all respect. 622 19 Supply & erection of hexagonal / cradle type gaused of G.I.wire no. 8 to 4 SWG including binding etc. complete in all respect. 629 20 Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator,19 mm 600 mm double screw tightener,7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in allrespect. 631 21 Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete inall respects. 627 22 Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. 628 23 Supply & fixing of LED street light fittingwith mandatory driver set having die cast Aluminium body and lenses suitable for 110Watt to 130 Watt and diffuser/ reflecto with driver set suitable for 110 to 130 watt. Confiming to IP 66 Protectionhaving company LOGO Engraved complete in all respects. including Labour.(i) Cat-AAA 12100-14300 system lumens High Power with nses,>110lm/W,PP>0.95,THD<10%,at full load,CR1>70, Potted driver set Not Circuitory Phase to phase protection at 440V and >300V auto cut and restart feature with 5 year warrantee. Cat-AAA 23.11 24 Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. 721

INR 1050 /-

INR 43300.0 /-

INR 4.32 Lakhs /-