|
| 1 | Taking down carefully from poles ACSR conductor, any size, complete all as specified and directed |
| 2 | Taking down carefully from poles cross arms of any size including clamps nuts bolts etc omplete all as specified and directed |
| 3 | Taking down carefully from poles LT insulators, any type, complete all as specified and directed |
| 4 | Taking up or down LT UG cable of size10 sqmm 4 Core from ground/ pole/ wall etc complete, all as specified and directed.Note : The earth work shall be measured ande paid separately, |
| 5 | Taking up or down LT UG cable of size16 sqmm 4 Core from ground/ pole/ wall etc complete, all as specified and directed.Note : The earth work shall be measured ande paid separately, |
| 6 | Taking up or down LT UG cable of size95 sqmm 3.5 Core from ground/ pole/ wall etc complete, all as specified and directed.Note : The earth work shall be measured and paid separately, |
| 7 | Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 10 Sqmm 4 core, 1100 Volts, heavy dutyXLPE insulated,PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductorcomplete, all as specified and directed. |
| 8 | Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 16 Sqmm 4 core, 1100 Volts, heavy dutyXLPE insulated,PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductorcomplete, all as specified and directed. |
| 9 | Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 25 Sqmm 3.5 core, 1100 Volts, heavy dutyXLPE insulated,PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductorcomplete, all as specified and directed |
| 10 | Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 35 Sqmm 3.5 core, 1100 Volts, heavy dutyXLPE insulated,PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductorcomplete, all as specified and directed |
| 11 | Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 70 Sqmm 3.5 core, 1100 Volts, heavy dutyXLPE insulated,PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductorcomplete, all as specified and directed |
| 12 | Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 95 Sqmm 3.5 core, 1100 Volts, heavy dutyXLPE insulated,PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductorcomplete, all as specified and directed |
| 13 | Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 120 Sqmm 3.5 core, 1100 Volts, heavy dutyXLPE insulated,PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductorcomplete, all as specified and directed |
| 14 | Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG electric cable of size 185 Sqmm 3.5 core, 1100 Volts, heavy dutyXLPE insulated,PVC bedded, galvanised steel strip or wired armoured with stranded aluminium conductorcomplete, all as specified and directed |
| 15 | Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried verticallyin ground (Each pit not less than 2.25 m deep below normal ground level with top edge of plate not less than 1.50 m below normal ground level) connected to GI strip 32 x 6 mm , by means of bolts, nuts, and check nuts and washers etc encased in GI protection pipe 40 mm dia light grade for protection of GI earth strip both to be provided to the extent of 7.5 meters, all as shown on electrical plate No 3 of MES SSR - 2009 Part - I, GI protection pipe buried in ground, laid under floors / plinths or mixed on walls / pole etc or concealed in walls etc; with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate, includinguding PCC 1:2:4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with GI 20 mm dia medium grade pipe and MS funnel with wire mesh for watering arrangement, includinguding necessary excavation and earth work in any type of soil / strata and testing on completion complete all as specified and directed.Note:- i) Cost of GI strip 32 x 6 mm and protection pipe 40 mm dia is deemmed to be includinguded in rate quotedii) Excavation and returning filling of Soil, any type, is deemed to be included in the quoted rates. |
| 16 | Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type,IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 1200 amps capacity , 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed.(a) ACB, 4 pole 800 Amps 415V, 50 KA Micro processor based - 01 No. (Incoming).(b) MCCB200 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 7 Nos (For Out Going)(c) MCCB160 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 3 Nos (For Out Going)(d) MCCB100 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 2 Nos (For Out Going) (e) MCCB100 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 1 Nos (For Out Going Spare)(f) Volt Meter (digital Type (0 -500 Volts)-01 No(g ) Ammeter (digital type) with CTs 0-1000Amps)-01 No(h) Phase indication lamps LED type with holder-01 Set(Set of Three) |
| 17 | Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type,IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 200 amps capacity , 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed.(a)MCCB 100 Amp,415 Vfour polewith thermal magnetic setting with Breaking Cap 25 KA-01 No(Incoming)(b) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 4 Nos (For Out Going) (b) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 1 Nos (For Out Going Spare) (c) Volt Meter (digital Type (0 -500 Volts)-01 No(d ) Ammeter (digital type) with CTs 0-300Amps)-01 No(e) Phase indication lamps LED type with holder-01 Set(Set of Three) |
| 18 | Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type,IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 400 amps capacity , 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed.(a)MCCB 200 Amp,415 Vfour polewith thermal magnetic setting with Breaking Cap 36 KA-01 No(Incoming)(b) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 7 Nos (For Out Going)(c) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 1 Nos (For Out Going Spare)(d) Volt Meter (digital Type (0 -500 Volts)-01 No(e ) Ammeter (digital type) with CTs 0-300Amps)-01 No(f) Phase indication lamps LED type with holder-01 Set(Set of Three) |
| 19 | Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type,IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 400 amps capacity , 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed.(a)MCCB 200 Amp,415 Vfour polewith thermal magnetic setting with Breaking Cap 36 KA-01 No(Incoming)(b) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 8 Nos (For Out Going) (c) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 1 Nos (For Out Going Spare)(d) Volt Meter (digital Type (0 -500 Volts)-01 No(e ) Ammeter (digital type) with CTs 0-300Amps)-01 No(f) Phase indication lamps LED type with holder-01 Set(Set of Three) |
| 20 | Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type,IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 300 amps capacity 04 number, 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed.(a)MCCB 200 Amp,415 Vfour polewith thermal magnetic setting with Breaking Cap 36 KA-01 No(Incoming)(b) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 8 Nos (For Out Going)(c) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 1 Nos (For Out Going Spare)(d) Volt Meter (digital Type (0 -500 Volts)-01 No(e ) Ammeter (digital type) with CTs 0-300Amps)-01 No(f) Phase indication lamps LED type with holder-01 Set (Set of Three) |
| 21 | Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type,IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 300 amps capacity (04 Nos), 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed.(a)MCCB 160 Amp,415 Vfour polewith thermal magnetic setting with Breaking Cap 36 KA-01 No(Incoming)(b) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 6 Nos (For Out Going) (c) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 1 Nos (For Out Going Spare)(c) Volt Meter (digital Type (0 -500 Volts)-01 No(d) Ammeter (digital type) with CTs 0-300Amps)-01 No(e) Phase indication lamps LED type with holder-01 Set(Set of Three) |
| 22 | Supply ,Install, test and commissioning of LT panel board, CPRI approved factory fabricated made out door, cubical type , vermin proof, dust proof, cubical type,IP-56, made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and bottom angle iron frame of size 50x50x5mm90 cm long and size suitable to accommodate the following accessories, with insulated alluminium busbar 200 amps capacity (04 Nos), 3 phase , 4 wire system, both sides openable (front and back) with locking arrangement , duly powder coated internally and externally with minimum seven tank process traetment connecting with cable with lugs includinguding internal wiring with copper cables of suitable size using lugs comprising the following accessories all as directed(a)MCCB 100 Amp,415 Vfour polewith thermal magnetic setting with Breaking Cap 25 KA-01 No(Incoming)(b) MCCB40 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 4 Nos (For Out Going) (c) MCCB32 Amps 415V 04 polewith thermal magnetic settingbreaking cap 18KA- 1 Nos (For Out Going Spare) (d) Volt Meter (digital Type (0 -500 Volts)-01 No(e ) Ammeter (digital type) with CTs 0-300Amps)-01 No(f) Phase indication lamps LED type with holder-01 Set(Set of Three) Note: (for Ser Item No. 17 to 23). - 1. The PanelShould be CPRI approved2.The rates Quoted shall be included for earth work, excavation, angle iron frame for foundation of panel board up to 0.45 m below GL in any type of soil and PCC 1:4:8 type D2 filling in foundation. The ground clearance of panel board shall be 0.45 M from GL to the bottom of panel board as directed by Engineer-in-Charge. |
| 23 | Material and labour loop in boxwithHeavy duty 4 way connector and MCB SP 6 Amps B series -01 No including clamps made of GI flat 25x4 mm with nut bolts washers etc all as directed |
| 24 | Supply and laying of HDPE DWC pipe of 65 mm dia for protection to LT cables complete all as specified and direceted. |
| 25 | Excavation in trenches not exceeding 1.50 m wide and not exc. 1.50 m in depth in soft / loose soil for foundation etc. or for laying of pipes and fittings, cables, HT / LT poles, stay assembly etc includinguding forming bottom surfaces to required level and slope and getting out ETC complete, all as specified and directed. |
| 26 | Returning, filling in, includinguding spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer complete all as specified and directed. |
| 27 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 28 | Material and Labour for road cutting for laying of protection pipes all as directed by Engineer-in-Charge. |
| 29 | Material and Labour for PCC 1:3:6, type C1 (using 20 mm graded stone aggregate)for redressing of road surfaces etc, complete all as specified and directed |
