Providing & Fixing Of Lighting Fixtures At New 132 Kvgss Rawajana Chord , Distt. Sawai Madhopur - P&F Normal/High Output High Pressure Sodium Vapour/ Metal Halide/Halogen Lamp As Required Complete In All Respect. All As Per Pre Approved By Engineer Inchar, Jalore-Rajasthan

Providing & Fixing Of Lighting Fixtures At New 132 Kvgss Rawajana Chord , Distt. Sawai Madhopur - P&F Normal/High Output High pressure sodium vapour/ Metal halide/Halogen lamp as required complete in all respect. All as per pre approved by Engineer incharge HPSV Tubular lamp Normal Output 250 Watt 28000 Lumens P & F IP-65 protected integral flood light luminaire suitable for HPSV/ Metal halide lamp comprising of powder coated die cast aluminium housing, electrochemically brightened and anodized stippled aluminium reflector, covered with suitably gasketed heat resistant and toughened glass, porcelain holder, integral control gear box having copper ballast, capacitor, electronic ignitor prewired with pvc insulated copper conductor up to terminal block including. making connection testing etc. as required. (with out lamp) 1 X 250 Watt P & F flush/surface type plastic enclosure for housing MCB/Isolator with Din rail including making connections with lugs, repairs etc. as required Two way FOR PWD BSR ITEM Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996)/ conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm.. conductor line load reversibility, IP 20 contact protection and fitted in existing distribution board/sheets, minimum. electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL/CPRI/ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product/work refer Annexure A attached with this BSR Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating Double pole MCB (With B/C curve tripping Characteristics). 40 A rating Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door Metal Glazed Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to 15-8623-1 & 3/IEC 61439-1 & 3, powder painted complete with reversible door (for double door DB only 1100 amp insulated copper bus bar/shorting link, copper neutral link, copper earth link color coded interconnecting wire set of suitable rating and din bar, masking sheet, making internal DB terminations with copper lugs. Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABI/CPRI/EHDA accrediated lab type test reports & All as per pre approved by Engineer in charge For additional technical parameters of product/work refer Annexure A attached with this BSR Glaze door single phase) IK-09 and IP-43 with Metal end box 4 Way(4+2) Providing & Laying P.V.C./XLPE insulated & P.V.C. sheathed Un-Arrmoured Aluminium cable confirming to 15:1554 P-1/ 15 7098 P of 1.1 KV with H4 Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 Inner/outer sheath confirming to 15:5831 in existing RCC/Hume/Stoneware / PVC pipe/ open duct/cable trench/Cable tray (with cable tie) including testing etc. as required of following size OEM must have its own in house NABI accrediated Laboratory for testing procedure as per 15:10810. For additional technical parameters of product/ work refer Annexure A attached with this BSR 4 Sq mm 2 core Providing & Laying PVC/XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to 15:1554 P4/15 7098 P-1 of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to 15 8130 of purity >99.6%, Inner / outer sheath confirming to 15:5831 in existing RCC/Hume/ Stoneware/PVC pipe/ open duct/cable trench/Cable tray (with cable tie) including testing etc as required of following size. OEM must have its own in house NABL accredited Laboratory for testing procedure as per 15:10810. For additional technical parameters of product/ work refer Annexure A attached with this BSR 65sq mm 2 core 165 sq mm 4 core

Refer document

Refer document

INR 4.87 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB