Tender For Construction Of Gram Panchyat Karalya At Akola Tq Ambajogai Dist Beed - Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means Bd.A.1 Page No. 259 Cubic(E-DSRI.No.21.01Page No.153) 2 2Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond thebuilding area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift| upto 1.50 m) By Manual MeansBd.A.2 Page No.259 Cubic (EDSR I.No.21.05Page No.153) 3 (3)Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer incharge. Cubic(E-DSRI.No.21.40P157) 4 4 Providing and laying in situ, cement concrete in M10 of trap/ granite/ quartzite/ gneiss metal for foundation and beddingincluding bailing out water, formwork, compacting and curing complete, with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer, With natural sand.Bd. E. 1 PageNo. 287(SSRI.No.24.01P175) 5 5 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page No. 263 (DSRI.No.21.37P.No194) A) with available 6 B) with contractors materials 7 6 Providing and laying in situ cement concrete M20 of trap/ granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footingsof R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to beprovided (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic micro processor based PLCwith SCADA enabled reversible drum type concrete mixer. With natural sand. Bd.F.3 Page No. 298 and B.7,(SSRI.No.25.11P178) 8 7 Providing and casting in situ cement concrete M20 of trap granite /quartzite/ gneiss metal for R.C.C. columns as perdetailed designs and drawing or as directed including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 ofmortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcementand structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concretemixer With Natural sand. Bd.F.5 Page No. 300 and B.7,(SSRI.No.25.31P179) Cum 9 8 Providing & casting in situ cement concrete M20 of trap /granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing etc.complete. (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabledreversible drum type concrete mixer With Crushed sand.Bd.F.6 Page No. 300 and B.7,Page No.38 (SSRI.No.25.50P181) 10 9 Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting curing finishing androughening the surface if special finish is to beprovided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With naturalsand/V.S.I. quality Artificial Sand Bd.F.9 Page No. 303 and B.7,Page No.38(E dSR 1.No.26.05P184) 11 10 Providing and casting in situ cement concrete M20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingscanopy as per detailed designs and drawings including centering, formwork, over blocks compaction finishing theformed surfaces with cement mortar 1:3 of ufficient minimum thickness to give a smooth and even surface or roughening ifspecial finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADAenabled reversible drum type concrete mixer With natural sand. Bd.F.8 Page No. 302 and B.7,(SSRI.No.25.70P182) 12 11 Providing and fixing in position TMT FE 500bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase,newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting.bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415steel bars (If Mild Steel/HYSD steel is to be used priorpermission from S.E. should be taken) Bd.F.17, Page No. 306 (E-DSR 1.No.26.33P.188) 13 12Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete(DSRI.No.27.03P197) 14 13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. 12.870 Complete (DSRI.No.27.05P197) 15 (14)Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal inforcementof 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. Bd.G.7 Page No. 316 (DSRI.No.27.06P197) 16 15)Providing and fixing Jungle (hard) wood of approved species joists and girders in timber floor of single, double or framed type including scaffolding if necessary and oneprimer oat etc. complete. (SSRI.No.37.04P230) 17 (16)Providing and fixing Country cut teak wood single leaf door shutter with teak wood style and rail of 25 mm thick including fixing 50 mm x 25 mm size welded mesh of 10 gauge as per detailed drawing or as directed with stainless steel fixture andfastening finishing with 3 coats of oil painting etc. complete.(SSRI.No.39.12P246) 18 17Providing and fixing in position. (as per I.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipehaving overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. Theshutter should be of bearing bottom 40 x 18x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. Andhandle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As perdetailed drawings and as directed by Engineer in charge (SSRI.No.39.37P251) 19 18 Providing and fixing sheet glass of 24 oz.for all size including putty etc. complete1.08 (SSRI.No.39.28P249) 20 19 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats ofanticorrosive paint and two coats of oilpainting complete. Bd.U.1 Page No. 537Square(SSRI.No. 40.01P264) 21 20 Providing and fixing collapsible steel gate in one two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with rollerN wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces,handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).BD-T-57 Page No. 511 Square (SSRI.No. 39.26P249) 22 21Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Bd. L.1 Page No. 367 Square Metre (E-DSRI.No32.01PNo.209) 23 22Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or bricksurfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 No.32.03 Page No.209 24 23 Providing internal cement plaster 20mm| thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 SquareMetre (E-DSRI.N.32.06P209) 25 24 Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curing and clearing etc. complete.e(DSRI.No.33.40P217) 26 25Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing andcleaning etc. complete .Bd.M.3 Page No. 380 Square Metre (SSRI.No.33.06P228) 27 26Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirtingin required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc.complete. Bd.M.13 Page No. 386. Square Metre SSRI.No.33.25 28 27Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (groupBla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting Bd.M. 12 Page No.385 Metre (SSRI.No.33.41P233) 29 28 Providing sills of required material 20mm to 5mm thick, on a bed of cement mortar 1:4 ncluding cement float, filling joints with neat cement slurry, curing, polishing, roundingedges, cleaning complete. b) Granite Spec. No.: Bd.M.31/Page No.393 Square Metre (SSRI.No.33.22P215)3886.00 Sqm 30039.00 30 29 Providing and applying two coats of lead/zinc base oil paint/ bituminous paint o fVapproved colour and shade to new wood work and fiber boards including preparingthe surface, knotting, scaffolding if necessary, excluding primer coat etc. complete. Bd.O. 1 Page No. 403 Square Metre(SSRI.No.35.01) 31 30 (21)Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Bd.P.6 Page No. 414(DSRI.No.36.12P244) 32 31Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer beforeapplying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt andother materials as required, etc. complete.As directed by Engineer in charge. DSRI.No.35.24P225) 33 32 Providing and applying whitewash in two coats on old new plastered or masonry surfaces and asbestos cementsheets including scaffolding and preparing the surface by brushing & brooming down etc. complete. Bd. P. I Page No.411 (E-DSRI.No. 36.03 Page No.227 34 33 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge Running Metre(E DSRI.No.42.61P280) 35 34 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings. remaking good the demolished portion etc. complete. Including removingexisting pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge Running Metre(E-DSR No 42 62P281) 36 35 Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.Bd.V.8 Page No. 554 Number (SSRI.No.41.42P270) 37 36 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Bd.V.8 Page No. Number 554 50(SSRI.No.41.40P270) 38 37 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters As directed by engineer- incharge. 39 38 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm. including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half roundG.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty140 kg with frame etc complete. Bd.V.43, Page No. 574 Numbe 40 39 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown/Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Bd.M. 3 B/Page No. 380 (SSRI.No.33.34) 41 40 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with ecessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. As directed by Engineer in charge. (SSR.No.42.87P 283) 42 41 Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete Specfications I.No.43.25P290) 43 42 Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. As directed by Engineer in charge (SSRI.NO.42.30P277 ) 44 43 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillartap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connectionsincluding P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc.Page complete.Bd.V.30 No. 565 Number(SSRI.No.41.64P272) 45 44 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. Bd.V.32 Page No.567 (SSRI.No.41.80P273) 46 45 Providing and fixingboard displayning information such as Name of work Tender cost Nema of Contractor having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge ( 1.25 mm thick mild steel sheet paintted with one coat of zinc chromate stoving on front side and border / messages / symbols etc. with approved colour shde paint complete on M.S.angale of size 35x35x3 mm frame with properly cross braced etc. complete . Spec . No As directed by Engineer in charge ( E- DSR Item No 6.36 page no 60) 47 Add G.S.T. 18 % 48 Add 1% Labor Insurance 49 Roylty 50 Roylty 51 cement concrete comprasive satrength 52 Brick work 53 Add1% for SQM Charge
