Tender For External Electrification Work For Newly Developed Plots (232) Of Shatabdi Nagar Sector-4. - PART(A) Electrification Work 2 S/E of S.T. pole 12.00 mtr long designated 410-SP-61 including base plate in 1:3:6 c.c. foundation excavation 1/6 of pole length below G.L. and plinth 30 cm above G.L. around the pole 20 cm thick and back filling etc. complete in all respects as per direction of E/IcPSR(F.No. 13/23-24) 3 S/E of Strut pole 11 mtr long designated 410-SP-55 including base plate in 1:3:6 c.c. foundation excavation1/6 of pole length below G.L. and 30cm above G.L. 20cm thick llott the pole and back filling etc with 2 Nos MS clamp complete in all respects as per direction of E/Ic. (23550+2x223)PSR(F.No. 13/23-24) 4 S/F of double pole structure with 2 nos S.T. pole for S/S410 SP-61 in 1:3:6 CC foundation 1/6 of pole length below G.I. and 30cm above G.I. 20cm thick around the pole with 1 nos. channel 100mmx50mm 1 Nos. channel 75mmx40mm necessary nuts bolts complete with painting etc. as per direction of E/I. PSR(F.No. 13/23-24) 5 S/F of “V” shape cross arm of 75mmx40mm. (6.8Kg/Mtr.) channel on pole, pin hole for 11 K.V. pin insulator, distance between pin hole insulator is 1220mm and total length ofchannel 1818mm including half clamp made of 50x6mm flat iron complete with red enamel paint. as per direction of E/Ich.PSR(F.No. 13/23-24) 6 S/E of 2.24 mtr. Long cross arm 75mmx 40mm. channel on pole including clamps, eye bolts etc. with red enamel paint as per direction of E/Ich.PSR(F.No. 13/23-24) 7 S/E of 2.24 mtr. Long cross arm 50mmx50mmx 6mm. Angle iron on pole including clamps, eye bolts with red enamel paint etc. as per direction of E/I. PSR(F.No. 13/23-24) 8 S/F of 11 KV Pin insulator with G.I. Bolt /spindle nut etc. complete in all respects.(PSR) 9 S/F of 11 KV Disc insulator including gun fitting on cross arm/clamps fixed on pole complete in all respects.(PSR) 10 S/E of over head line with A.C.S.R. conductor on pole/service bracket including binding etc. complete in all respects. S.I.No-627/18. Racoon/Dog 11 S/E of over head line with G.I. wire on 8 to 4 SWG on pole/service bracket including binding etc. complete in all respects SI.No. 628/18. 12 S/F of Hexagonal cradle type guards made of 8 to 4 SWG G.I wire etc complete in all respects.. including binding SI.No. 629 /2018 13 S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole.(PSR) 14 S/E of stay set at 3.5mtr away from the pole with galvanized 19mm dia 1.8 mtr long stay rod 30cmx30cmx6.3mm anchor plate thimble stay clamp stay insulator 19mmx600mm double screw tightener, 7/3.5mm G.I. stay wire etc. in 1:3:6 C.C. in all respects. SI.No. 631/2018. 15 Painting of the electric pole with 2 coats of AL’ paint over red oxide primer complete in all respects SI.No.634/18. 16 S/F of 11000 V danger board and Fabricated from 10 Gauge MS sheet on poleon pole as per direction of E/Ich. SI.No.1109/18 17 S/F of M.S. Channel 1.38 meter long on top pillar size 100x50mm as per direction of E/I.(Analysed) 18 S/L of following size XLPE11 K.V. H.T. cable proper completion of work as per direction of E/I(make Finolex, Havells, Gloster, Polycab) 19 (a) 300 Sq.mm (Analysed) 20 S/L offollowing size XLPEcable box with out door jointing kit proper completion of work make Rachem/Mahindra as per direction of E/I. 21 (a) 300 mm2 3 core (PSR)(File No. 13/23-24) 22 S/L of following size G.I. B class pipe at a depth of 750mm below ground level as cable carrier as direction of E/I.(PSR) 23 (a) 150 mm dia 24 S/E of 11 K.V L.A. set of 3 Nos. suitable for mounting on steel support complete in all respect as perdirection of E/I. 25 S/E of 11 K.V. T.P.M.O. switch on pole including handle rod etc. complete in all respects as per direction of E/Ich. 26 S/E of 11 K.V. D.O. fuse set on pole complete in all respect as per direction of E/I. 27 S/F of level 2 following capacity 11/0.433 K.V. copper wound conventional 50Hz 3 phase oil immersed naturally cooled distribution T/F confirming and with amendments there of, havinglosses as per BEE standered with all standard fittings, including first filling of oil complete in all respects, of make Crompton, Kirloskar, Areva, Kanohar (Merrut) PME Noida & Univac.Or UPPCL/KESCO Approved. (PSR)(File No. 71/22-23) 28 (a) 400 KVA 29 S/B of 600mmx600mmx6mm G.I plate vertically for earthing with it top at least 3 mtr below G.L. complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of 1 No 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe, plate up to switch board 30Cm C.I. frame with hinged cover masonry housing Alternate layers of charchole/coke and solt etc. as per direction of E/I. Complete in all respects.S.I.No-702/18. 30 S/L of following size cable Al conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size, approved make i.e. Havels, Polycab, Krishna, Gloster as direction of E/I. complete in all respects. 501/2018. 31 (a) 400 Sq.mm 3½ Core 32 (a) S/E of TPN distribution pillar fabricated with wire clade dust and vermin proof as per drawing consisting suitable copper bus bar 60mmx10mm or equivalent cross sectional area consisting on Henley’s pattern fuse unit set complete as follows .(A) 2 incoming 500 Amp fuse unit and out going 2 Nos. 500 Amp And 2 Nos.300 Amp.Metallic pillar shall be made of 14 SWG MS sheet on frame of angle iron of 35mmx35mmx5mm duly with both 2 coat of approval paint over rust resisting primer both side locking arrangement handle & danger board complete with suitable masonry plate-form for mounting of pillar. The pillar shall have earthing terminal as per direction of E/I. (File No. 15/18-19) 33 S/F of 2 meter height cage fabricated with 3mm thick expended metal fixed on 50mmx50mmx6mm angle iron frame having vertical member spaced at 1 to 1.25 mtr and horizontal member spaced 1 mtr the vertical member shall be grouted in floor and horizontal member in the wall to a depth of 300mm with and end forked the case shall have 2000mmx1000mm size of one leaf door with locking arrangement device with 35mm x35mmx6mm angle iron and 3mm expended metal duly fixed with the cage member with inside etc. The case shall have painted with red oxide primer and synthetic enamel paint the job includes all materials I T&P for proper completion of work SI.No.1142/SOR-18. 34 Earth work in excavation in foundations in ordinary soil (loan clay or sand ) including lift up to 1.5mtr and lead up to 50mtr.and including filling watering and remaining of excavation earth into trenches or into the space dressing of side and remaining of bottom and disposal of surface excavation earth as directed by E/I.Ch-4 I.No- 2.6.1/2022 35 Providing and laying in cement concrete 1:4:8 (1cement: 4 fine sand: 8 graded brick aggregate 40 mm. nominal size) and curing complete, including cost of form work in foundation and floors. Ch-5 I.No- 275/2022 36 M-150 Brick work in 1:4 cement and coarse of mortar in foundation and plinth including supply of all materials I T&P etc. required for proper completion of work.Ch-6 I.No- 6.1.6/2022 37 12mm cement plaster in single coats of on fair side of single or ½ brick wall for interior plastering up to floor to level including internal rounded angle not exceeding 80mm in girth and finishing even and smooth one cement and four fine in 1:4 Cement & fine Sand. 1 Ch-13 I.No- 13.1.1/2022 38 S/E of S.T. pole 9.50mtr long designated 410-SP-38 including base plate in 1:3:6 c.c. foundation excavation1/6 of pole length below G.L. and 30cm above G.L. 20cm thick llott the pole and back filling etc. complete in all respects as per direction of E/Ic SI.No.618/18. 39 S/E of S.T. strut pole 9.00mtr long designated 410-SP-32 including base plate in 1:3:6 c.c. foundation excavation1/6 of pole length below G.L. and 30cm above G.L. 20cm thick llott the pole and back filling etc. complete in all respects as per direction of E/Ic. (14671+2x223) 40 S/L of Arial bunch cable 1100 V grade XLPE insulated KESCo. approved make confirming to latest relevant specification on steel/PCC supports including binding jumpering sagging and cost of material I T&P etc required for proper completion of work,approved make i.e. Havells, Polycab, Finolex, KEI as per direction of E/I. 41 (a) (3CX120+1X95+1X16)Sq.mm (F.No. 71/22-23) 42 S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18. 43 (a) 400 sq.mm 44 (b) 240 sq.mm 45 (c) 120 sq.mm 46 (d) 95 sq.mm. 47 (e)70 sq.mm. 48 S/F of suspension type clamp made of AL alloy and shall be capable of holding Al alloy messenger wire of compacted dia. The eye hook shall be made offorged or mild steel the clamp shall be provided with black weather resistant plastic coating of at least 1mm thickness to prevent insulation of phase conductor from chafing due to rubbing against the clamp it shall provided sufficient flexibility to allow the movement of clamp at both, straight and angle location its hard ware shall have good finished and all ferrous fittings eye hook bolts nut and washer shall be galvanized with zinc and it also includes all the cost of material I T&P etc required for proper completion ofwork.(PSR) 49 S/F of dead end clamp made of high strength AL alloy and U-bar shall be made of hot dip galvanized steel and eye hook of forged steel or mild steel clamp shall be suitable messenger wire all ferrous fitting eye hook bolt, nut and washer shall be galvanized with zinc including the cost of material I T&P etc required for proper completion of work.(PSR) 50 S/F of piercing connector made of AL alloy suitable of holding main conductor/tap conductor of compacted diameter the connector shall be covered by the black weather resistant insulation cover made of polyethylene at least 2m thick to avoid short circuit and corrosion including the cost of material I T&P etc for proper completion of work.(PSR) 51 S/F of distribution board box for 3 phase ten way connection made of fiber sheet 450x300x200mm size complete with bus bar 25x5mm, neutral bus bar 20x5mm, along with clamps holes etc including the cost of material I T&P etc for proper completion of work.(PSR) 52 S/F of M.S. Channel0.35meter long on top pole channel100x50mm as per direction of E/I.(PSR) 53 S/L of 32mmx6mm GI strip from earth electrode directly in the ground as required complete in all respect Item No 717 SOR-2018 54 S/F of double pole structure with 2 nos S.T. polefor line pole 410 SP-61 in 1:3:6 CC foundation 1/6 of pole length below G.I. and 30cm above G.I. 20cm thick around the pole with 1 nos. channel 100mmx50mm 1 Nos. channel 75mmx40mm 2 Nos. 3.5 Mtr long 50x50mmx6mm angle iron for bracing necessary nuts bolts complete with painting etc. as per direction of E/I.(PSR)(File No. 13/23-24) 55 S/L of 25 Sq.mm Single core Al cable for jumpering complete in all respect. 56 S/F of 800 A capacity fixed type air curcuit breaker with box made of 16 SWG CRCA Sheet with fabrication duly painted enenal paint, locking arrangement including 50X50X6 mm angle iron frame, volt meter, AS, VS ampere meter indicator & required Cts complete in all respect as per direction of Engineer-in-charge.(PSR)(F.No.-71/22-23) 57 PART(B) Street Light Work 58 S/F of 12.5 Mtr High mast shaft of approved make with rising system hot dip galvanized inside & outside dip, heaving pole sheet thickness 3mm. Top dia minimum 150mm, Bottom dia 310 mm base plate 25mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6mm dia, double drum winch, including making suitable foundation as per manufacture drawing/site requirement along with foundation bolts nuts, washers anchor plates etc complete in all respect as per direction of Engineer-in-charge. SI. No. 651/18.Make: utkarsh, Cromton, Bajaj, Philips. 59 S/F of LED Street Light fitting with mandatory driver set having die cast aluminum body and lenses suitable for 140 watt. to 150 watt and Confirming to IP 66 Protection having company LOGO engraved complete in all respect. SI No. 1454/18. CAT-AAA make- (Bajaj, Philips, Wipro, Havells oor UPPWD approved) 60 S/F of LED Street Light fitting with mandatory driver set having die cast aluminum body and lenses suitable for 75 watt. to 90 watt and Confirming to IP 66 Protection having company LOGO engraved complete in all respect. SI No. 1423/18. CAT-AAA make- (Bajaj, Philips, Wipro, Havells oor UPPWD approved) 61 S/L of following size Al conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size, approved make as direction of E/I. complete in all respects. 501/2018. 62 b. 10 sq.mm 4 core 63 S/F of 63 Amp 415 V metal clad TPNrewireable type switch fuse unit on complete in all respect as per direction of Engineer-in-charge. SI. No. 316/18. CAT-B 64 S/L of 1X25+1X16 Sq.mm of Arial bunch cable 1100 V grade XLPE insulated KESCo. Approved make confirming to latest relevant specification on steel/PCC supports including binding jumpering sagging and cost of material labour T&P etc required for proper completion of work as per direction of E/I. Make Nikkon, RR cable, Havells, Grandlay & Polycab. 65 S/F of suspension type clamp made of AL alloy and shall be capable of holding Al alloy messenger wire of compacted dia. The eye hook shall be made offorged or mild steel the clamp shall be provided with black weather resistant plastic coating of at least 1mm thickness to prevent insulation of phase conductor from chafing due to rubbing against the clamp it shall provided sufficient flexibility to allow the movement of clamp at both, straight and angle location its hard ware shall have good finished and all ferrous fittings eye hook bolts nut and washer shall be galvanized with zinc and it also includes all the cost of material I T&P etc required for proper completion ofwork.(PSR) 66 S/F of dead end clamp made of high strength AL alloy and U-bar shall be made of hot dip galvanized steel and eye hook of forged steel or mild steel clamp shall be suitable messenger wire all ferrous fitting eye hook bolt, nut and washer shall be galvanized with zinc including the cost of material I T&P etc required for proper completion of work.(PSR) 67 Supply and laying of 80mm dia G.I. Pipe B class for cable complete with support by 20x3mm M.S. clamp of 3 Nos. all complete. 68 S/B of 600mmx600mmx6mm G.I plate vertically for earthing with it top at least 3 mtr below G.L. complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of 1 No 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe, up to switch board 30Cm C.I. frame with hinged cover masonry housing Alternate layers of charchole/coke and solt etc. as per direction of E/Inch. Complete in all respects.S.I.No-702/18. 69 S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/Inch.SI.No.504/SOR-18. 70 (a) 10 sq.mm 71 S/L of 25mmx3mm GI strip from earth electrode directly in the ground as required complete in all respect Item No 716 SOR-2018 72 S/W of submains with two nos. 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer-in-charge. SI. No. 289/18. 73 S/F of 40 A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc in case of TPN, complete in all respect. SI. No. 807(f) (ii)/18. MAKE: L&T, Indo Asian & Schnedier.
