}

Tender For Kandhiya Railway Fatak Se Manapur Varanasi Border Tak - Providing,Laying,Spreading And Compacting Stone Aggregates Of Specific Sizes (22.4-53 Mm)To Water Bound Macadam Specification Including Spreading In Uniform Thickness,Hand Packing,Rolling , bhadohi-Uttar Pradesh

Public Works Department has published Tender For Kandhiya Railway Fatak Se Manapur Varanasi Border Tak - Providing,Laying,Spreading And Compacting Stone Aggregates Of Specific Sizes (22.4-53 Mm)To Water Bound Macadam Specification Including Spreading In Uniform Thickness,Hand Packing,Rolling . Submission Date for this Tender is 07-02-2025. Road Work Tenders in bhadohi Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

47362017
Corrigendum : Tender For Kandhiya Railway Fatak Se Manapur Varanasi Border Tak - Providing,Laying,Spreading And Compacting Stone Aggregates Of Specific Sizes (22.4-53 Mm)To Water Bound Macadam Specification Including Spreading In Uniform Thickness,Hand Packing,Rolling
Open Tender
Indian
Uttar Pradesh
Bhadohi
07-02-2025

Tender Documents

Tender Details

Tender for Kandhiya Railway Fatak Se Manapur Varanasi Border Tak - Providing,laying,spreading and compacting stone aggregates of specific sizes (22.4-53 mm)to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with smooth wheeI roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate,watering and compacting to the required density. WBM Grading-III as per Technical Spcification clause 405. 2 Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502. 3 Providing and applying tack coat with bitumen (VG-10) using bitumen Emulsion pressure distributor @ 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with mechanicalbroom as per Technical Specification Clause 503. 4 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen @1.46 kg/sqm to required line,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying and rolling with three wheel 80-100 kN static rollar capacity finished to required level and grades to be followed by seal coat of Type-C as per TechnicalSpecificationClause 508. 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type-C with bitumen binder @ 0.65 kg/sqm including cost of bitumen as per Technical Specification Clause 510. 6 Construction of un-reinforced, dowel jointed, at expansion and construction joints only plain cement concrete pavement thicknees as per design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less 0.2 cum capacity and OPC appropriate weighbatcher using approved mix design,laid in approved fixed side fromwork (steel channel)laying fixing of 125 micron thick polythene firm wedge steel plate including leveling the fromwork as per drawing uploading the concrete withshovels rakes compacted using needle screed and polate vibrators and finished in sonnotous operation including provision of contraction and expention construction joints applying debonding strip primer scalant dowel bar near approaches to bridge/culvert and construction joints admixturesas approved curing compound (where specified) and water finishing to liner and grade as per drawing and technical specification clause 1501. 7 Earth work in cutting or in Shoulder / Patri in ordinary soil, excavation to be in the form or regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layerincluding ramming & dressing the surface to required level and slopes andalso including lift up to 1.5m and lead up to 30m the earth cutting to be deposited as spoil banks within 30m distance as per directed by Engineer in charge as per SI.No. 253.

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 30-01-2025 date Date 07-02-2025

Key Value

Document Fees
INR 944 /-
EMD
INR 305000.0 /-
Tender Value
INR 30.50 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Notice 0 KB
Click here to download tender document Tender Document 0 KB
Click here to download tender document Tender Document 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail