|
| 1 | (A)Bifurcation of 33 KV Line due to overloading |
| 2 | 33 KV OVERHEAD LINE WORK |
| 3 | PCC Poles |
| 4 | PCC Pole 9 mtrs long (400 KG) |
| 5 | 12.8 MTR. Long lattice tower made of 50 X 50 X 6 MM M.S. angle with 50 X 6 MM M.S. FLAT for bracing as per nigam specification |
| 6 | 33 KV \"V\" cross arms with TOP Hamper made of MS Angle75X75X6 mm with clamp of size 50X10 mm,earth clamp50X6 mm with nuts, bolts & Washers as per latest specification and drawings adopted & approved by Nigam (Galvanized as per IS) |
| 7 | A SET OF 4 NOS. 33KV \"V\" CROSS ARMS(CHAKRI) MADE OF M.S. CHANNEL 100X50 MM ISMC [9.56 KG PER MTRS.] ON THE EXISTING LATTICE TOWER WITH BRACING OF M.S. FLAT ( 50 X 10 MM) INCLUDING NUT AND BOLTS ETC. WEIGHT OF THE ITEM WILL BE AS PER DRAWING |
| 8 | A set of 4 NOS. 33 KV \"V\" cross arms (Chakri) made of M.S.Angle 75x75x6 mm with bracing of M.S.Flat 50 x 10 mm including all necessary clamps, nuts & bolts etc. (Galvanized as per IS) |
| 9 | M.S. CHANNEL [CUT POINT ] 100X50 MM ISMC [9.56 KG. PER MTR] 2X1.8 MTRS LONG WITH PILOT PATTI 50X6MM [2.36 Kg. per mtr] THICK AND NECESSARY NUTS AND BOLTS ETC. WEIGHT OF THE CUT POINT CHANNEL WILL BE AS PER DRAWING APPX. 39.00 Kg. (Galvanized as per IS). |
| 10 | 33 KV DOUBLE POLE LINE STRUCTURE SET FOR CUT POINT COMPLETE ON EXISTING POLES IN ALL RESPECT WITH CLAMP, NUT & BOLTS AS REQURIED MADE FROM M.S.CHANNEL 100 X 50 X ISMC ( 9.56 KG. PER MTR.) ISA M.S.ANGLE 65 X 65 X 6 MM, M.S.ANGLE 50 X 50 X 6 MM AND M.S.FLAT 50 X 6 MM (Galvanized as per IS) |
| 11 | 33 KV PORCELAIN PIN INSULATOR WITH PIN ON EXISTING POLE COMPLETE INCLUDING ALL ACCESSSORIES LIKE HARDWARE FITTING AND NUTS AND BOLTS ETC. |
| 12 | GS Stay set complete with 20 mm dia., 2.4 meter long stay rod with zinc coated steel Anchor Plate of size 300x300x4 mm with square hole of size 18x18 mm at centre IN GROUND AND GS STAY WIRE 7/8 MM TIGHTENED THROUGH 33 KV STAY INSULATOR INCLUDING CLAMPS |
| 13 | GS WIRE NO.6 SWG HOT DIP GALVANIZED [5.0 MM DIA] COMPLETE IN ALL RESPECTS WITH BINDING WIRE EACH POLE WITH TOP HAMPER & CROSS ARM (WITH 1.1 M WIRE). |
| 14 | Overhead ACSR 100 Sq.mm. Dog conductor on existing cross arms complete in all respect. (Cost of material includes the sag and jumpering) |
| 15 | ACSR Dog conductor |
| 16 | PG Clamps for Dog conductor |
| 17 | HD GALVANISED M.S.ROD TYPE EARTHING SET MADE UP OF M.S.ROD 20 MM DIA. 3 METER LONG ALONGWITH EARTHING CLAMP & 8 SWG EARTH WIRE 15 METER LONG (FOR EARTHING OF 33 KV LINE) . |
| 18 | BACK CLAMP AND STAY CLAMP FOR CROSS ARMS, STAY, EARTH AND GUARDING BRACKET OF MS FLAT |
| 19 | 33KV DANGER PLATE ON THE TOWERS/ POLES COMPLETE IN ALL RESPECT AS PER DRAWING. |
| 20 | ISA M.S. ANGLE 50X50X6 MM (Galvanized as per IS) |
| 21 | ISA M.S. ANGLE 65X65X6 MM (Galvanized as per IS) |
| 22 | ISA M.S. Flat 50X 6 (Galvanized as per IS) |
| 23 | ISA M.S. Channel 100X50X6 (Galvanized as per IS) |
| 24 | Fixing of ,45KN. porcelain disc.insulators for 33 KV ( each unit consisting of 3 Nos. disc insulators & 1 Nos.B&S Type hardware) (Free issue by Nigam) |
| 25 | (B)Bifurcation of 11 KV Line due to oveloading |
| 26 | 11 KV Bay |
| 27 | Outdoor 11 KV O/D VCB KIOSK complete with accessories including use of special tools |
| 28 | Control Cable of size 4C X 4 SQ.MM. 1100 Volts PVC Insulated including supply of ferrules . |
| 29 | Control Cable of size 12C X 2.5 SQ.MM. 1100 Volts PVC Insulated including supply of ferrules |
| 30 | Overhead steel cored aluminum ACSR DOG[100SqMM(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing |
| 31 | M.S. Flat 50 X 6 mm (Galvanized) for earthing |
| 32 | Earthing rod sets for S/S made with MS Rod (Galvanized ) 20 mm dia, 3 meter length |
| 33 | Metering points on 11 KV outgoing feeder at 33/11 KV S/S.(including following cost of (a) and (b) ) |
| 34 | (a) Mounting structure (Galvanized) |
| 35 | (b) The requisite steel members will be supplied by contractor including the hardware.Contractor shall joint/weld the members to form the mounting structure as per drawing.Necessary tools,welding ,machines,lifting devics etc. shall be arranged by contractor. |
| 36 | Installation of Metering equipments: |
| 37 | 11KV CT PT Set(200/5 Amp.) |
| 38 | MIP meter boxThe meter box will be fixed firmly with sufficient strength at a place as per drawing. The test terminal block(TTB) link type shall be provided by contractor in the meter box. |
| 39 | GO double break without EB Isolator on existing bracket complete in all respect as required including hardware etc. |
| 40 | 11KV ( with 9 x 24 KV Post Insulator ) 400 Amp. |
| 41 | Horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc. |
| 42 | 11KV ( with 6 x 24 KV Post Insulator ) 1 Set=3 NOS |
| 43 | PCC Poles |
| 44 | PCC POLE 9.0 mtrs long.(200 Kg.) |
| 45 | 45KN. porcelain disc.insulators for 11 KV ( each unit consisting of disc insulators & one B&S Type hardware) on brackets complete including all acessories like hardware fitting etc. |
| 46 | 11 KV 5KN composite polymer Pin Insulator complete in all respect |
| 47 | PG clamps Dog to Dog on over headlines/jumpers, etc. All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanising |
| 48 | 11 kV Danger plate of size 200 X 250 mm complete in all respect |
| 49 | M.S Channel 100x50x6mm |
| 50 | M.S Angle 65x65x6mm |
| 51 | 11 KV UnderGround Cable Work |
| 52 | UNDERGROUND CABLE FOR WORKING VOLTAGE OF 11KV ALUMINIUM CONDUCTOR (IS 7098) CABLE XLPE ARMOURED |
| 53 | Under ground Cable of Size 3X185 SQ.MM for 11 KV |
| 54 | G.I. PIPE OF 125 MM DIAMETER, B-CLASS (IS:1239 MARK) |
| 55 | GI PIPE for Cable Support at Pole ( Each 3.3 Mtr ) |
| 56 | GI PIPE for Cable Support at Tower ( Each 3.3 Mtr ) |
| 57 | CABLE FOR11 KV ALUMINUM CONDUCTOR XLPE ARMOURED HT CABLE |
| 58 | XLPE 3X185 SQ.MM H.S. ON OUTDOOR TYPE |
| 59 | XLPE 3X185 SQ.MM H.S.S.T. JOINT |
| 60 | Galvanised M.S.Rod type earthing set (including nuts & bolts) made up of M.S.Rod 20 mm dia. 3 meter long alongwith earthing clamp & 8 SWG earth wire 15 meter long (for earthing of 11 KV line) |
| 61 | 11 KV Over Head Line Work |
| 62 | PCC Poles |
| 63 | PCC Pole 9 mtrs long (200 KG) |
| 64 | 11.4 MTR. Long lattice tower made of 50 X 50 X 6 MM M.S. angle with 50 X 6 MM M.S. FLAT for bracing as per nigam specification |
| 65 | 11KV DOUBLE POLE LINE STRUCTURE SET FOR CUT POINT COMPLETE ON EXISTING POLES IN ALL RESPECT WITH CLAMP, NUT & BOLTS AS REQURIED MADE FROM M.S.CHANNEL 100 X 50 X ISMC (9.56 KG. PER MTR.) ISA M.S.ANGLE 65 X 65 X 6 MM, M.S.ANGLE 50 X50 X 6 MM AND M.S.FLAT 50 X 6 MM(105 KG. APPROX.) (Galvanized as per IS)Total weight 101.38 Kg+4 Kg (Approx.) |
| 66 | Overhead steel cored aluminum ACSR Rabbit conductor in all respect |
| 67 | 11KV Cross Arm with Top Hamper with clamps made of MS Angle 65x65x6mm, clamp 50X6 mm, earth clamp 50X6 mm (Galvanized) |
| 68 | GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG |
| 69 | Earthing rod set for 11 KV lines made with MS rod (Galvanised) 20 mm dia, 3 meter length along |
| 70 | 11KV T&C Type composite polymer insulator complete including all accessories like hardware fitting (as per latest specifications and drawings adopted & approved by NIGAM) |
| 71 | 11 KV 5KN composite polymer Pin Insulator complete in all respect |
| 72 | PG clamps (For Rabbit) made of aluminum alloy as per IS:617-1994 . All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanizing in accordance with IS 2633-1986 |
| 73 | 8 SWG (4mm dia) GI Wire for continuous earthing of 11 KV Line hot dip (Galvanised) |
| 74 | 11 KV Danger plate of size 200 X 250 mm complete in all respect |
| 75 | 1.4 Mtr Channel bracket with clamp |
| 76 | (C)HVDS works |
| 77 | 11 KV Overhead Line-1-Phase |
| 78 | PCC Poles |
| 79 | PCC Pole 9 mtrs long (200 KG) |
| 80 | Overhead steel cored aluminum ACSR WEASEL [30 sq.mm (6+1)/(2.59+2.59) mm ]conductor |
| 81 | 11KV Cross Arm with Top Hamper with clamps made of MS Angle 65x65x6mm, clamp 50X6 mm, earth clamp 50X6 mm (Galvanized) |
| 82 | GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG |
| 83 | 11KV T&C Type composite polymer insulator complete including all accessories like hardware fitting (as per latest specifications and drawings adopted & approved by NIGAM) |
| 84 | 11 KV 5KN composite polymer Pin Insulator complete in all respect |
| 85 | LT Porcelain Pin insulators with pins |
| 86 | PG clamps (Weasel to Weasel) made of aluminum alloy as per IS:617-1994 . All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanizing in accordance with IS 2633-1986(latest amended) |
| 87 | 8 SWG (4mm dia) GI Wire for continuous earthing of 11 KV Line hot dip (Galvanised) |
| 88 | 11 KV Danger plate of size 200 X 250 mm complete in all respect |
| 89 | 1.4 Mtr Channel bracket with clamp |
| 90 | 11 KV Overhead Line-3-Phase |
| 91 | PCC Poles |
| 92 | PCC Pole 9 mtrs long (200 KG) |
| 93 | 11.4 MTR. Long lattice tower made of 50 X 50 X 6 MM M.S. angle with 50 X 6 MM M.S. FLAT for bracing as per nigam specification |
| 94 | 11KV DOUBLE POLE LINE STRUCTURE SET FOR CUT POINT COMPLETE ON EXISTING POLES IN ALL RESPECT WITH CLAMP, NUT & BOLTS AS REQURIED MADE FROM M.S.CHANNEL 100 X 50 X ISMC (9.56 KG. PER MTR.) ISA M.S.ANGLE 65 X 65 X 6 MM, M.S.ANGLE 50 X50 X 6 MM AND M.S.FLAT 50 X 6 MM(105 KG. APPROX.) (Galvanized as per IS)Total weight 101.38 Kg+4 Kg (Approx.) |
| 95 | Overhead steel cored aluminum ACSR Rabbit conductor in all respect |
| 96 | 11KV Cross Arm with Top Hamper with clamps made of MS Angle 65x65x6mm, clamp 50X6 mm, earth clamp 50X6 mm (Galvanized) |
| 97 | GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG |
| 98 | Earthing rod set for 11 KV lines made with MS rod (Galvanised) 20 mm dia, 3 meter length along |
| 99 | 11KV T&C Type composite polymer insulator complete including all accessories like hardware fitting (as per latest specifications and drawings adopted & approved by NIGAM) |
| 100 | 11 KV 5KN composite polymer Pin Insulator complete in all respect |
| 101 | PG clamps (For Rabbit) made of aluminum alloy as per IS:617-1994. All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanizing in accordance with IS 2633-1986(latest amended) com plete in all respect as required for ACSR conductor, |
| 102 | 8 SWG (4mm dia) GI Wire for continuous earthing of 11 KV Line hot dip (Galvanised) |
| 103 | 11 KV Danger plate of size 200 X 250 mm complete in all respect |
| 104 | 1.4 Mtr Channel bracket with clamp |
| 105 | 11 KV Underground Cable |
| 106 | PCC Poles |
| 107 | PCC Pole 9 mtrs long (200 KG) |
| 108 | UNDERGROUND CABLE FOR WORKING VOLTAGE OF 11KV ALUMINIUM CONDUCTOR (IS 7098) CABLE XLPE ARMOURED |
| 109 | Under ground Cable of Size 3X185 SQ.MM for 11 KV |
| 110 | G.I. PIPE OF 125 MM DIAMETER, B-CLASS (IS:1239 MARK) |
| 111 | GI PIPE for Cable Support at Pole ( Each 3.3 Mtr ) |
| 112 | CABLE FOR11 KV ALUMINUM CONDUCTOR XLPE ARMOURED HT CABLE |
| 113 | XLPE 3X185 SQ.MM H.S. ON OUTDOOR TYPE |
| 114 | XLPE 3X185 SQ.MM H.S.S.T. JOINT |
| 115 | HD Galvanised M.S.Rod type earthing set (including nuts & bolts) made up of M.S.Rod 20 mm dia. 3 meter long alongwith earthing clamp & 8 SWG earth wire 15 meter long (for earthing of 11 KV line) |
| 116 | 1-Phase DTR |
| 117 | PCC Poles |
| 118 | PCC Pole 9 mtrs long (400 KG) |
| 119 | 6.35KV/240 V aluminium wound, conventional outdoor type distribution transformers with all fittings and accessories and first filling of transformer oil alongwith MCCB. Protection on LV side confirming |
| 120 | 5 KVA |
| 121 | 10 KVA |
| 122 | 16 KVA |
| 123 | M.S. Flat 50 X 6 mm for mounting single phase transformer on poles. |
| 124 | 6.35/0.24 KV substation structure for 5 KVA complete (galvanized as per IS) complete in all respect made of MS Channel, MS angle and MS flat etc. including nut ,bolt,flat and spring washer (as per latest specification and drawing adopted & approved by NIGAM) (36.054 Kg. + 2 Kg. approx.) |
| 125 | 6.35/0.24 KV substation structure for 10/16/25 KVA complete (galvanized as per IS) complete in all respect made of MS Channel, MS angle and MS flat etc. including nut ,bolt,flat and spring washer (as per latest specification and drawing adopted & approved by NIGAM) (36.054 Kg. + 2 Kg. approx.) |
| 126 | Earthing rod sets for S/S made with MS Rod (Galvanized ) 20 mm dia, 3 meter length as per latest specification and drawing adopted & approved by NIGAM. |
| 127 | 11 KV 100 Amp. Drop out cum isolator with 5.0 Amp. fuse & 12 KV post insulators including nut, bolt & washers as required as per technical specifications, approved drawings and scope of work. |
| 128 | GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG |
| 129 | 11KV T&C Type composite polymer insulator complete including all accessories like hardware fitting (as per latest specifications and drawings adopted & approved by NIGAM) |
| 130 | 11 KV 5KN composite polymer Pin Insulator complete in all respect |
| 131 | Danger plate of size 200 X 250 mm complete in all respect |
| 132 | PG clamps (Weasel to Weasel) made of aluminum alloy as per IS:617-1994 etc. All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanizing in accordance with IS 2633-1986(latest amended) com plete in all respect as required for ACSR conductor, |
| 133 | 3-Phase DTR |
| 134 | PCC Poles |
| 135 | PCC Ploe 9.0 mtrs long.(400 Kg.) |
| 136 | Overhead steel cored aluminum ACSR Rabbit conductor in all respect |
| 137 | LT XLPE Cable |
| 138 | Size 4CX70 SQ. mm |
| 139 | 11 /0.4 KV Al wound, Three Phase Distribution Transformer (Completely self protected with provision of LT Bushing Box) |
| 140 | 25 KVA (Aluminium) |
| 141 | 40 KVA (Aluminium) |
| 142 | 63 KVA (Aluminium) |
| 143 | 100 KVA (Aluminium) |
| 144 | M.S. Flat 50 X 6 mm for mounting single phase transformer on poles. |
| 145 | LT Supply Pillar Box of 200 Amp. capacity as per specification of Nigam . |
| 146 | 11KV ( with 9 x 24 KV Post Insulator ) 400 Amp. GO double break without EB Isolator on existing bracket complete in all respect as required including hardware etc. |
| 147 | 11/0.4 KV SubStation structure set on existing poles in all respect with clamps made from M.S. channel 100x50 X6 mm and 75x40 mm, M.S. angle 50x50x6 and M.S. flat 50x6 mm and 50x8 mm weight(166.746 kgs.) Approx (All galvanized as per relevant IS) |
| 148 | Horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc. ( with 6 x 24 KV Post Insulator ) 1 Set=3 NOS |
| 149 | LIGHTENING ARRESTOR ( FEEDER TYPE) ON ERECTED STRUCTURE / SUPPORT ( SET OF 3 NOS. ) |
| 150 | Earthing rod sets for S/S made with MS Rod (Galvanized ) 20 mm dia, 3 meter length as per latest specification and drawing adopted & approved by NIGAM. |
| 151 | GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG |
| 152 | 11KV T&C Type composite polymer insulator complete including all accessories like hardware fitting (as per latest specifications and drawings adopted & approved by NIGAM) |
| 153 | 11 KV 5KN composite polymer Pin Insulator complete in all respect |
| 154 | Danger plate of size 200 X 250 mm complete in all respect |
| 155 | PG clamps (For Rabbit) made of aluminum alloy as per IS:617-1994. All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanizing in accordance with IS 2633-1986(latest amended) com plete in all respect as required for ACSR conductor, |
| 156 | (D) Cabling Works in Theft Prone Area |
| 157 | LT Ariel Bunch Cable |
| 158 | PCC Poles |
| 159 | PCC Pole 9 mtrs long (200 KG) |
| 160 | Overhead ABC(Aerial bunched cable) with Bare Messenger |
| 161 | 1C X25 +1CX25 sqmm |
| 162 | 3C X25 +1CX25 sqmm |
| 163 | GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG |
| 164 | Dead end (anchor) clamps for insulated or bare messenger + one Pole Bracket + 1.5 mtr S.S. (Stainless Steel) Strap + two SS Buckles as per NFC Standard suitable for AB Cable Complete in all respect (galvanized as per IS) |
| 165 | Suspension (anchor) clamps for insulated or bare messenger + one Pole Bracket + 1.5 mtr S.S. (Stainless Steel) Strap + two SS Buckles as per NFC Standard suitable for AB Cable Complete in all respect (galvanized as per IS) |
| 166 | LT insulation piercing connectors NFC Type A (main to tap) (main 16-50 mm2, Tap off 2.5-16 mm2) |
| 167 | LT insulation piercing connectors NFC type B ( main to main) (size 16-50 mm2) |
| 168 | Spring loaded box (1 phase) |
| 169 | Spring loaded box (3 phase) |
| 170 | LT Underground Cable |
| 171 | 4 Core LT XLPE insulated PVC sheathed armoured Cable |
| 172 | Size 4CX120 SQ. mm |
| 173 | Size 4CX185 SQ. mm |
| 174 | LT DISTRIBUTION BOX AS PER SPECIFICATION OF NIGAM. |
| 175 | 100 AMP LT DISTRIBUTION BOX |
| 176 | Earthing rod sets for S/S made with MS Rod (Galvanized ) 20 mm dia, 3 meter length as per latest specification and drawing adopted & approved by NIGAM. |
| 177 | LT Armoured Service Cable |
| 178 | 2CX4 Sq MM |
| 179 | 4CX16 Sq MM |
| 180 | (E)Segregation of 11 KV Ag-Non Ag Feeders |
| 181 | 11 KV Bay |
| 182 | Outdoor 11 KV O/D VCB KIOSK complete with accessories including use of special tools |
| 183 | Control Cable of size 4 X 4 SQ.MM. 1100 Volts PVC Insulated including supplyof ferrules |
| 184 | Control Cable of size 12C X 2.5 SQ.MM. 1100 Volts PVC Insulated including supply of ferrules |
| 185 | Overhead steel cored aluminum ACSR DOG[100SqMM(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing |
| 186 | M.S. Flat 50 X 6 mm (Galvanized) for earthing |
| 187 | Earthing rod sets for S/S made with MS Rod (Galvanized ) 20 mm dia, 3 meter length as per latest specification and drawing adopted & approved by NIGAM. |
| 188 | Metering points on 11 KV outgoing feeder at 33/11 KV S/S.(including following cost of (a) and (b) ) |
| 189 | (a) Mounting structure (Galvanized) |
| 190 | (b) The requisite steel members will be supplied by contractor including the hardware.Contractor shall joint/weld the members to form the mounting structure as per drawing.Necessary tools,welding ,machines,lifting devics etc. shall be arranged by contractor. |
| 191 | Installation of Metering equipments: |
| 192 | 11KV CT PT Set(200/5 Amp.) |
| 193 | MIP meter box.The meter box will be fixed firmly with sufficient strength at a place as per drawing. The test terminal block(TTB) link type shall be provided by contractor in the meter box. |
| 194 | GO double break without EB Isolator on existing bracket complete in all respect as required including hardware etc. |
| 195 | 11KV ( with 9 x 24 KV Post Insulator ) 400 Amp. |
| 196 | Horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc. |
| 197 | 11KV ( with 6 x 24 KV Post Insulator ) 1 Set=3 NOS |
| 198 | PCC Poles |
| 199 | PCC Pole 9 mtrs long (200 KG) |
| 200 | 45KN. porcelain disc.insulators for 11 KV ( each unit consisting of disc insulators & one B&S Type hardware) on brackets complete including all acessories like hardware fitting etc. |
| 201 | 11 KV 5KN composite polymer Pin Insulator complete in all respect |
| 202 | PG clamps Dog to Dog on over headlines/jumpers, etc. All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanising |
| 203 | 11 KV Danger plate of size 200 X 250 mm complete in all respect |
| 204 | M.S Channel 100x50x6mm |
| 205 | M.S Angle 65x65x6mm |
| 206 | 11 KV UnderGround Cable Work |
| 207 | PCCPoles |
| 208 | PCC Pole 9 mtrs long (200 KG) |
| 209 | UNDERGROUND CABLE FOR WORKING VOLTAGE OF 11KV ALUMINIUM CONDUCTOR (IS 7098) CABLE XLPE ARMOURED |
| 210 | Under ground Cable of Size 3X185 SQ.MM for 11 KV |
| 211 | G.I. PIPE OF 125 MM DIAMETER, B-CLASS (IS:1239 MARK) |
| 212 | GI PIPE for Cable Support at Pole ( Each 3.3 Mtr ) |
| 213 | CABLE FOR11 KV ALUMINUM CONDUCTOR XLPE ARMOURED HT CABLE |
| 214 | XLPE 3X185 SQ.MM H.S. ON OUTDOOR TYPE |
| 215 | XLPE 3X185 SQ.MM H.S.S.T. JOINT |
| 216 | HD Galvanised M.S.Rod type earthing set (including nuts & bolts) made up of M.S.Rod 20 mm dia. 3 meter long alongwith earthing clamp & 8 SWG earth wire 15 meter long (for earthing of 11 KV line) |
| 217 | Double break without EB Isolator on existing bracket complete in all respect as required including hardware nut, bolts & washer etc. |
| 218 | 11KV (with 9 x 24 KV Post Insulator ) 400 Amp. - as per latest specification, design & drawing approved by the NIGAM |
| 219 | 11 KV Over Head Line Work |
| 220 | PCC Poles |
| 221 | PCC Pole 9 mtrs long (200 KG) |
| 222 | 11.4 MTR. Long lattice tower made of 50 X 50 X 6 MM M.S. angle with 50 X 6 MM M.S. FLAT for bracing as per nigam specification |
| 223 | 11KV DOUBLE POLE LINE STRUCTURE SET FOR CUT POINT COMPLETE ON EXISTING POLES IN ALL RESPECT WITH CLAMP, NUT & BOLTS AS REQURIED MADE FROM M.S.CHANNEL 100 X 50 X ISMC (9.56 KG. PER MTR.) ISA M.S.ANGLE 65 X 65 X 6 MM, M.S.ANGLE 50 X50 X 6 MM AND M.S.FLAT 50 X 6 MM(105 KG. APPROX.) (Galvanized as per IS)Total weight 101.38 Kg+4 Kg (Approx.) |
| 224 | Overhead steel cored aluminum ACSR Rabbit conductor in all respect |
| 225 | 11KV Cross Arm with Top Hamper with clamps made of MS Angle 65x65x6mm, clamp 50X6 mm, earth clamp 50X6 mm (Galvanized) |
| 226 | GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG |
| 227 | Earthing rod set for 11 KV lines made with MS rod (Galvanised) 20 mm dia, 3 meter length along |
| 228 | 11KV T&C Type composite polymer insulator complete including all accessories like hardware fitting (as per latest specifications and drawings adopted & approved by NIGAM) |
| 229 | 11 KV 5KN composite polymer Pin Insulator complete in all respect |
| 230 | PG clamps (For Rabbit) made of aluminum alloy as per IS:617-1994. All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanizing in accordance with IS 2633-1986(latest amended) com plete in all respect as required for ACSR conductor, |
| 231 | 8 SWG (4mm dia) GI Wire for continuous earthing of 11 KV Line hot dip (Galvanised) |
| 232 | 11 KV Danger plate of size 200 X 250 mm complete in all respect |
| 233 | 1.4 Mtr Channel bracket with clamp |
| 234 | 3-Phase DTR |
| 235 | PCC Poles |
| 236 | PCC Ploe 9.0 mtrs long.(400 Kg.) |
| 237 | Overhead steel cored aluminum ACSR Rabbit conductor in all respect |
| 238 | LT XLPE Cable |
| 239 | Size 4CX70 SQ. mm |
| 240 | 11 /0.4 KV Al wound, Three Phase Distribution Transformer (Completely self protected with provision of LT Bushing Box) |
| 241 | 16 KVA |
| 242 | 25 KVA |
| 243 | 40 KVA |
| 244 | 63 KVA |
| 245 | M.S. Flat 50 X 6 mm for mounting single phase transformer on poles. |
| 246 | LT Supply Pillar Box of 200 Amp. capacity as per specification of Nigam . |
| 247 | 11KV ( with 9 x 24 KV Post Insulator ) 400 Amp. GO double break without EB Isolator on existing bracket complete in all respect as required including hardware etc. |
| 248 | 11/0.4 KV SubStation structure set on existing poles in all respect with clamps made from M.S. channel 100x50 X6 mm and 75x40 mm, M.S. angle 50x50x6 and M.S. flat 50x6 mm and 50x8 mm weight(166.746 kgs.) Approx (All galvanized as per relevant IS) |
| 249 | Horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc. ( with 6 x 24 KV Post Insulator ) 1 Set=3 NOS |
| 250 | LIGHTENING ARRESTOR ( FEEDER TYPE) ON ERECTED STRUCTURE / SUPPORT ( SET OF 3 NOS. ) |
| 251 | Earthing rod sets for S/S made with MS Rod (Galvanized ) 20 mm dia, 3 meter length as per latest specification and drawing adopted & approved by NIGAM. |
| 252 | GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG |
| 253 | 11KV T&C Type composite polymer insulator complete including all accessories like hardware fitting (as per latest specifications and drawings adopted & approved by NIGAM) |
| 254 | 11 KV 5KN composite polymer Pin Insulator complete in all respect |
| 255 | Danger plate of size 200 X 250 mm complete in all respect |
| 256 | PG clamps (For Rabbit) made of aluminum alloy as per IS:617-1994. All ferrous metal part intended for outdoor use except those made of stainless steel shall be protected by hot dip galvanizing in accordance with IS 2633-1986(latest amended) com plete in all respect as required for ACSR conductor, |
| 257 | LT Ariel Bunch Cable |
| 258 | PCC Poles |
| 259 | PCC Pole 9 mtrs long (200 KG) |
| 260 | Overhead ABC(Aerial bunched cable) with Bare Messenger |
| 261 | 3C X25 +1CX25 sqmm |
| 262 | GI stay set (Galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300X300X4 mm,12 mm dia turn buckle) including stay clamps, strain insulator, Stay wire7/10 SWG |
| 263 | Dead end (anchor) clamps for insulated or bare messenger + one Pole Bracket + 1.5 mtr S.S. (Stainless Steel) Strap + two SS Buckles as per NFC Standard suitable for AB Cable Complete in all respect (galvanized as per IS) |
| 264 | Suspension (anchor) clamps for insulated or bare messenger + one Pole Bracket + 1.5 mtr S.S. (Stainless Steel) Strap + two SS Buckles as per NFC Standard suitable for AB Cable Complete in all respect (galvanized as per IS) |
| 265 | LT insulation piercing connectors NFC Type A (main to tap) (main 16-50 mm2, Tap off 2.5-16 mm2) |
