Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-02-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-02-2025 |
| 2 | 04-02-2025 | Corrigendum | Other | 10-02-2025 |
| 3 | 04-02-2025 | Date Corrigendum | Date | 10-02-2025 |
| Sl. No. | Item Description |
| 1 | Taking down carefully existing points wiring on surface conduit/concealed conduit forlight/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc complete all as specified and directed. |
| 2 | M&L for point wiring with single corePVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI markednot less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possibleincluding Tee, Junction boxes and provision offlush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi strandedcopper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch. |
| 3 | All as per Sl item No 1 above herein before but controlled by two 2 way switch complete all as specified and directed. |
| 4 | All as per Sl item No 1 above herein before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed. |
| 5 | All as per Sl item No 1 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed. |
| 6 | All as per item No.2 herein beforebut 2.5 Sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLScopperearth wire for modular switch socket combination 3 pin 15 amps on independent board |
| 7 | S&F Modular Socket6A/16A - 2/3 pin combined 2 module suitablefor 15 Amp plug top Multipurpose 230 V complete,all as specified & directed. |
| 8 | S & F Modular Socket, 6A - 2/3 pin combined 2 module, 230 V complete,all as specified & directed. |
| 9 | S & F Modular Switch Piano flush type 6 amp single Pole one way 230 V complete,all as specified & directed. |
| 10 | S & F Modular Switch Piano flush type 6 amp single Pole two way 230 V complete,all as specified & directed. |
| 11 | S & F Modular switch 1 way 16A, 1 module flush type single Pole one way 230 V complete,all as specified & directed. |
| 12 | S & F Ceiling rose surface bakelite surface 65 x 50mm, 3 terminals complete,all as specified & directed. |
| 13 | S & F modular Switch Bell push 5 amp single Pole230 V complete,all as specified & directed. |
| 14 | S & F Bellding dong type, AC 230 volts complete,all as specified & directed. |
| 15 | S & F Lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed. |
| 16 | S & F wall mounted decorative light with 9 W LED bulb complete all as specified and directed. |
| 17 | S & F LED bulb 7 W complete all as specified and directed. |
| 18 | S & F bulk head 10 W with LED bulb complete all as specified and directed. |
| 19 | Supply & Fixing LED light fitting 10 W batten (Mirror light) for Retro LED Energy saving tube light , high efficiency PMMA diffuser gives soft glare free light environmental friendly, energy efficient ready to use pack complete,all as specified & directed. |
| 20 | Supply & Fixing LED light fitting 20 W batten for Retro LED Energy saving tube light , high efficiency PMMA diffuser gives soft glare free light environmental friendly, energy efficient ready to use pack complete,all as specified & directed. |
| 21 | S & F modular electronic ceiling fan regulator stepped type 2 module 120 W heavy duty suitable to work on 230 volts complete all as specified. |
| 22 | M & Lfor Sub main wiring with 2 single core PVCinsulated unsheathed cable, 1100v grade with FRLS PVC 6 sq mm copper cable multi stranded conductordrawn through in and including PVC rigid non metallic concealed conduit 20 mm dia, medium duty, ISI Marked to be terminated in DB boxas per IS including of 6 sqmm diaFRLS PVC Copper cable green colour asearth wire connected to earth complete,all as specified & directed. |
| 23 | S & F MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA(type \"C\") complete,all as specified & directed. |
| 24 | Supply & Fixing MCB SPN, 240 Volts, 32 Ampsbreaking capacity 10 KA (type C curve) complete,all as specified & directed. |
| 25 | S & F sheet metal enclosure MCB DBSPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthingcomplete all as specified and directed. |
| 26 | S & F sheet metal enclosure MCB DBVTPN 4 way with 200 amps rated bus bar 415 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 with incoming with MCCB having door earthing complete all as specified and directed. |
| 27 | Supply only LED of 9 Watt 6000K,joy round recess mounted, compact vertical, round shaped downlighter with removable driver for low ceiling heights and all other connected all other connected accessories complete all as directed. |
| 28 | Supply and fixing twin core flexible wire of size 40/0.0076 complete,all as specified & directed. |
| 29 | Supply and fixing twin core flexible wire of size 23/0.0076 complete,all as specified & directed. |
| 30 | Supply and fixing PVC insulated, FRLS, unsheathed single core, multistranded copper conductor industrial cable 1.5 Sqmm complete,all as specified & directed. |
| 31 | Supply and fixing PVC insulated, FRLS, unsheathed single core, multistranded copper conductor industrial cable 2.5 Sqmm complete,all as specified & directed. |
| 32 | Supply only Hylum sheet 3 mm thick of size 4\" x 4\" including screws for fixing complete,all as specified & directed. |
| 33 | Supply only Hylum sheet 3 mm thick of size 7\" x 4\" including screws for fixing complete,all as specified & directed. |
| 34 | Supply and fixing in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed,one twin core cable flat or circular of aluminium stranded conductors of size 10 Sqmm complete,all as specified & directed. |
| 35 | Supply and fixing in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed,one twin core cable flat or circular of aluminium stranded conductors of size6 Sqmm complete,all as specified & directed. |
| 36 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor, complete, all as specified and directed. |
| 37 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete, including making holes of correct size suitable for mounting the exhaust fans and making good the disturbed surfaces complete all as specified and directed |
| 38 | S&F exhaust fans made of metallic body AC single phase 240V copper wounded of size 300 mm sweep with louver shutter white in colour complete including making holes of correct size suitable for mounting the exhaust fans and making good the disturbed surfaces complete all as specified and directed |
| 39 | Dismantling & taking out unserviceable steel & iron items from poles i.e cross arms, bracing, supports, clamps and back plates etc. including nuts & bolts complete and Supply & fixing cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts & bolts , washers , welding bending cold or hot , drilling holes for bolts in any shape or sizeas indicatedor directed and inclusive of two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. |
| 40 | S & F MCB Isolator four pole 63 Amps capacity 415 V, all as specified and directed by Engineer-in-Charge. |
| 41 | S & F MCB four pole 63 Amps capacity 415 V, all as specified and directed by Engineer-in-Charge. |
| 42 | Supply and fixing LED Bollard light IP65 Rated with robust design and efficient light distribution Crompton syrus Cat part No LBLSR-10-CDL all as specified and directed. |
| 43 | Disconnecting and taking down the existing solar water heater of any description and any capacity (200/500 LPD) and any position from the existing location and Dismantling the solar water heater of any capacity and of any description material and labour for cleaning and de-scaling the inner tank and other parts / accessories including inlet, outlet , overflowheating element, thermostat , base assembly etc. with brush, cleaning rod, and using de-scaling solution mixed with water in suitable proportion till the complete deposits /scale is removed as approved by Engineer-in-Charge, brazing/weldingfor stopping leakage of inner tank/gas welding for inner steel tank/welding for tubes for solar panels, re- assembling the complete solar water heater after cleaning,fixing and installation of solar water heater in position and testing to the entire satisfaction of Engineer-in-Charge.Note :- Spare parts if any requires replacement shall be measured and paid for separately |
| 44 | Supply and fixing Heating element of the 3 KW rating as required at site including rubber washers of any make and type complete, all as specified and as directed. |
| 45 | Supply and fixing thermostate of the 20 Amp rating as required at site including rubber washers of any make and type complete, all as specified and as directed. |
| 46 | Supplying, Laying, testing and commissioning in replacement of UNSV medium grade GI tube 20 mm for outlet of solar water heater and insulated with glass wool and metallic shielding for proper insulation complete all as specified and directed. |
| 47 | Disconnecting and removing the water and electric connections carefully from the existing submersible pump sets of any capacity, any size,any makeand taking out the submersible pump set ofalongwith column pipe 100 mm dia,electric cableand fittings ofbore well or strip opening the pump set (approximately 450 feets depth of pump set from GL) and taking out the pump setalongwith pipes and fittings for flushing the bore well or strip opening the pump set for repairs, replacement of worn out spares, fixing of serviceable spares assembling the pump set completely, testing of pump set, lowering the pump set inside the bore well after repairs, including connecting back the water and electric connections, Commissioning of pump set for satisfactory operation on its full load complete., all as specified and directed. NOTES :1.Contractor shall take proper precautions while lifting out and removing pump set from bore well so as to avoid any damage to column pipe and submersible cable.All necessary T&P and equipments required for lifting out pump set etc shall be arranged by the contractor at his own cost. 2. Number of column pipe may vary from 30 to 50, The existing pipes & flanged joints shall be checked for its serviceability & unserviceable joints alongwith flanges shall be removed from the column pipe by cutting the pipes & making new thread in pipes for fixing of new flange joint, the cost of same shall be deemed to be included in the quoted rate for above item. However cleaning of pipes if any required shall be measured & paid separately.3. Expendable stores like cotton waste/cleaning materials lubricants , gland packing metal filling, machinaing and transportation to and fro from site to work shop are deemed to be included in rate quoted. 4.The spares required for repair the pump sets,motor,MS pipe,MS Nut& botls ,rubber gasketjointsand rewinding of motorsshall be measured and paid for separately as supply onlyunder appropriate items of Schedule ‘A’.5. Labour elemetns is included in unit rates. |
| 48 | Opening the pump and motor for inspection, repairs and reassembling the pump and motor as per the original assembly after repairs/ replaceing the wourn out unserviceable parts with new parts as ordered (the parts including cleaning replacing the minor items like, packing bolts, nuts and washers and MS clamps etc) making the pump and motor fully serviceable including machining etc and testing the both after refixing duly testing and commissioning all as specified and directed by the E-in-Charge for 35 to 52 HPcapacity, 3 phase, 415 volts, 50 HZ, AC supply, pumps & motors of make KSB / SU / CALAMA. complete, all as specified and directed.Note: - (i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under appropriate item of Sch ‘A’ and fixing rate for new items are deemed to include under these items. (ii)Burnt out windings of motor shall be replaced, measured and paid for separately under appropriate item of Sch ‘A’ for rewinding.(iii) The rates for above items are deemed to include transportation to & fro of pumps/ motors to workshop as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at workshop.(iv)The rate quoted for the item shall include re-metaling of Pump shaft, polishing andgrinding and making standard size to match with Gun Metal Bush/Neck-ring.(v) Lifting of pump and motor from bore well and lowering of pump and motor after repairs shall be measured and paid separately under appropriate item of Schedule `A\"(vi) The quoted rate shall be deemed to include replacement of small/ minor parts i.e. washers, keys for coupling, cable packing ring etc. |
| 49 | Supply onlyfollowing items / spare parts suitable for AC submersible pump set of 30 to 50 HP capacity dismantled / fixed under Sch ‘A’ item No. 47 complete, all as specified and directed. |
| 50 | Cast iron stage bowl |
| 51 | Gun metal neck ring |
| 52 | Anti magnetic stainless steel pump shaft with key |
| 53 | Gun metal impeller |
| 54 | Stainless steel sleeve (Inlet) |
| 55 | Stainless steel sleeve (Outlet) |
| 56 | Running bush out let of Gun metal |
| 57 | Stage bowl cover |
| 58 | Bolt stud with nut and washers |
| 59 | Running bush inlet of Gun metal |
| 60 | Strainer stainless steel |
| 61 | Shaft nut with washer |
| 62 | Supply only the following items / spare parts suitable for Motor of AC submersible pump of 30 to 52 HP capacity dismantled/fixed under Sch ‘A’ item No. 47here in above ccomplete, all as specified and directed. |
| 63 | Stainless steel sleeve DE and NDE. |
| 64 | Connector for motor |
| 65 | Steel bolt |
| 66 | Key for thrust plate |
| 67 | Bush bearing (Set of two) |
| 68 | Thrust bearing (Set of two) |
| 69 | Cable pressure washer |
| 70 | T-bolts with nuts |
| 71 | Bearingbush rubber |
| 72 | Thrust Plate |
| 73 | Supply only 35 Sqmm, 3 Core, flat submersible Cable, PVCinsulated, PVC sheathed with multi-stranded copper conductors, conforming to IS : 694- 1990 of 1100 Volt grade,dismantled/fixedunder Sch ‘A’ item No. 1 above complete, all as specified and directed. |
| 74 | Supply only rubber gasket joints in flanged end MS/ cast iron pipes and fittings complete with and including minimum 3 mm thick rubber/fibre gasket and necessary nuts/bolts/ washers complete, all as specified and directed. for following sizes in replacement :- |
| 75 | 100 mm bore |
| 76 | 150 mm bore |
| 77 | Disconnecting & taking out the existingdefective Oil immersed star delta starter of any description, any capacity and in any position, 3 phase,415 volts, 50 Hz suitable for AC supply submersible pump set upto 80 HP (Make : Jyoti) and strip opening of Star delta starter, taking out unserviceable/defective wiring & parts, cleaning and servicing complete including replacement of unserviceable parts andcopper wiring with new one of existing size, reassembling, fixing in position, making connections and testing complete, all as specified and directed. Notes :-(i) Replacement of unserviceable parts shall be measured and paid for separately under appropriate item of Sch ‘A’ as supply only but fixing charges of the parts replaced/repaired is deemed to be included in these item (ii) Transformer oil shall be drained out and collected in contractors own containers and reused after heating and filtration throughfiltration plant to achieve the dielectric strength/insulation value upto 40 KV and filling shall be included in the rate quoted by the contractor for above items.(iii) Fresh transformer oil required for top up shall be measured as “supply only” but its heatingand filling shall be included in the rate quoted by the contractor for above items. |
| 78 | Supply only the following items / spare parts suitable for star delta starter of capacity upto 45/50/60 HP capacity dismantled/fixed under Sch ‘A’ item No. 77 here in above complete, all as specified and directed. |
| 79 | Fixed contact ’ (Set of 24) |
| 80 | Moving contact ’ (Set of 12) |
| 81 | Cam spring |
| 82 | Lever spring |
| 83 | Over load coil |
| 84 | No volt coil 415 Volts AC |
| 85 | Supply ,fixing,testingand commissioning in replacement of unserviceable submersible pump NRV from any position completeand Supply and fixing of submersible pump NRV for 100mm dia column pipe, suitable for 35 to 50 HP capacity pumps as per existing model of Make SU/Calama/KSB designed for vertical fittingcomplete, all as specified and as directed. |
| 86 | Supply, fixing, testing & commissioning in replacement of unserviceable Power Contactor ML-4 type, 3 pole, coil voltage 415 / 440 Volts, 50 Hz with 2 NO + 2 NC auxiliary contacts, having current rating (AC3) of 70 Amps at 415 volts complete, all as specified and directed. Cat part No :-SS 90910 ofmake L&T or equivalentmodel in specified make as approved by GE. |
| 87 | Material and labour for repair to run lead joints including caulking properly with using old retrieved lead from taking up or down pipes butwith and including using new spun yarn for the following sizes of CI pipes/fittingsetc complete, all as specified and directed.Notes :(i) Earth work in excavation, returning filling in and removal shall be measured and paid separately.(ii)Additional quantity of lead, if any required, for making new joints other than the quantity of lead retrieved from taking up / downpipes, shall be measured and paid for separately as ‘’supply only’’ under appropriate item of Schedule `A\" |
| 88 | 150 mm bore |
| 89 | 100mm bore |
| 90 | Supply only pig lead of best quality conforming to IS : 782 – 1978 for providing lead joints complete, all as specified and directed. |
| 91 | Supply only wool lead of best quality conforming to relevant IS for providing lead joints complete, all as specified and directed. |
| 92 | Supply and fixing in replacement of unserviceable water gauge of range 0-100 psi, 100mm dia in delivery line with in incluing socket welding in pipe line complete, all as specified and directed. |
| 93 | Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft/loose soil including forming sides and bottom surface to requiredlevels/slops/gradients etc. complete, all as specified and directed by Engr-in-chargeNote:- The disturbed surface of roads/paths/plinths etc. shall be repaired and quoted rates deemed to include this aspect. |
| 94 | Returning, filling in, including spreading leveling, watering and well ramming the excavated soil in layers not exceeding 25 cm thick complete, all as specified and directed. |
| 95 | Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directedat a level not exceeding 1.5 mtr above starting point complete, all as specified and directed. |
| 96 | Taking up or down old existing GI tubing and connections, including connected fittings/ accessories and fixtures of any description/ grade and in any position in trenches/under floors/road / floor /duct on walls etc and including cleaning for reuse if serviceable orunserviceable to be removal to store complete, all as specified and as directed by Engr-in-charge(Note:- (i) Earth work in excavation, returning filling in and removal & GI fitting shall be measured and paid separately under appropriate items of Schedule ‘A’ for the following bore of pipes:- |
| 97 | 15 mm bore |
| 98 | 20 mm bore |
| 99 | 25 mm bore |
| 100 | 40 mm bore |
| 101 | 50 mm bore |
| 102 | Supply, laying, connecting & testing of galvanised iron water tubing \"medium grade\" conforming to IS-1239 with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc as required complete fixed to walls and ceilings, laid in trenches/under floor/under road orfloorscomplete,(Note:-(i) Earth work in excavation, returning filling in and removal & GI fitting shall be measured and paid separately under appropriate items of Schedule ‘A’)all as specified and directed by Engr-in-charge for the following bore of pipes :- |
| 103 | 15 mm bore |
| 104 | 20 mm bore |
| 105 | 25 mm bore |
| 106 | 40 mm bore |
| 107 | 50 mm bore |
| 108 | Re-laying, jointing & testing of old serviceable galvanised iron water tubing \"any grade\"with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc as required complete fixed to walls and ceilings, laid in trenches/under floor/under roadcomplete all as specified and directed for the following sizes :- (Note:- Old pipe will be obtained from sch \"A\" item No- 108 of taking down.Earth work shall be measured and paid separetely under respective item of sch \"A\") |
| 109 | 15 mm bore |
| 110 | 20 mm bore |
| 111 | 25 mm bore |
| 112 | 40 mm bore |
| 113 | 50 mm bore |
| 114 | Supply, fixing and testing in replacement of unserviceable Gate valve/Globe valve and Supply, fixing, jointing and testing, of gun metal globe or gate valve with iron wheel head, both ends screwed for iron pipe, conforming to IS 778 complete, all as specified and directed for following bore of pipes :- (Make: Sant/Bir/ Leader/Upadhaya) |
| 115 | 20mm bore |
| 116 | 25mm bore |
| 117 | 40mm bore |
| 118 | 50mm bore |
| 119 | Taking out or downdefectivesluice valve from main line andopening carefully old defective sluice valve of any description and in any position for and including servicing, over-hauling / greasing etc, and replacement of old unserviceable / worn out parts and reassembling the sluice valve after repair and refixing the same & testing after installation complete, all as specified anddirected Engr-in-Chargefor following bores :-Note :- (i)The cost of Earth work, joints & jointing materials washers, gaskets and minor parts shall be deemed to be included in the quoted rates but Replacement of the defective parts i.e. cast iron gate & stainless steel spindle of Sluice valve shall be measured and paid for separately as supply onlyunder appropriate items of Schedule ‘A’ |
| 120 | 150mm bore |
| 121 | 100 mm bore |
| 122 | Supply only stainless steel spindle, heavy duty, threaded, with and including one gun metal check unit suitable for sluice valves of any description dismantled/fixedunder Sch `A` item No 114 to 122 here in above complete, all as specified and directed by Engr-in-charge forfollowing bores :- |
| 123 | 150mm bore |
| 124 | 100mm bore |
| 125 | 80 mm bore |
| 126 | Supply, installation, fixing, jointing and testing in replacement of unserviceablecast iron sluice valve of class PN-1.60 both ends flanged with iron wheel head and stainless steel spindle, short body type, conforming toIS-14846 of 2000 including rubber gasket and nut blot with washer for flange jointscomplete, all as specified and directed by Engr-in-charge for following bores:-Notes:- The cost of Earth work, joints & jointing materials of the sluice valveshall be deemed to be included in the quoted rates. |
| 127 | 150 mm bore |
| 128 | 100 mm bore |
| 129 | M & L for cleaning/ scraping ofsteel/ cast iron surfaces of existing dull painting ofValve pit chamber inner pipe lines and valves etc and applying two coats of synthetic enameled paint over a coat ofred oxide primer by spray machine complete, all as specified and directed. Note : The Chamber, valves, connected pipe line etc. shall be painted according to colour code specified as per IS Instructions and as directed by Engr-in-Charge at site. |
| 130 | Supply, laying, jointing and testing in replacement of unserviceable DI/CI pipe by new one ductile Iron Pipe with spigot socketed ,Class “K-7” including specials and rubber tyton joint ring, laid in trenches,or floor/under road omplete, all as specified and directed for the following bore:- |
| 131 | 200mm bore |
| 132 | 150 mm bore |
| 133 | 100 mm bore |
| 134 | Supply, installed, jointing and testing in replacement of unserviceable non return valvesof cast iron non return valve both ends flangedcomplete all as specified and directed for following bores:-Notes:- (i) The cost of Earth work, joints & jointing materials of thenon return valve shall be deemed to be included in the quoted rates. |
| 135 | 150 mm bore |
| 136 | 100 mm bore |
| 137 | M&L for cleaning and disinfecting of RCC OH tank of50,000 gallon capacity upto 16 Mtr staging, of any shape by initially cleaning the external area and the entry man hole with skilled manpower with protective clothing and apparatus etc and approved electrically operated equipments including all tools, tacles and labour equipments e.g. electric machines, pumps (including desludging pump), pressure water jet, sludge removal etc. required for completion of the work in all respect by specialized water tank cleaning process as under: (mentioned in Srl No. 106 here in below) |
| 138 | M&L for cleaning and disinfecting of RCC OH tank of25,000 gallon capacity upto 16 Mtr staging, of any shape by initially cleaning the external area and the entry man hole with skilled manpower with protective clothing and apparatus etc and approved electrically operated equipments including all tools, tacles and labour equipments e.g. electric machines, pumps (including desludging pump), pressure water jet, sludge removal etc. required for completion of the work in all respect by specialized water tank cleaning process as under: (mentioned in Srl No. 106 here in below) |
| 139 | (i) Dewatering of over head tank by drain out pipe.(ii) Mechanized removal of all remaining dirty water by high capacity pump set.(iii) Removal of sludge by vacuum operated Pump.(iv) Cleaning of walls, ceiling and bottom of tank by high pressure rotary jet 120 bars pressure.(v) Removal of all dirty particles by industrial wet vacuum cleaner leaving the tank 99.9% physically cleaned.(vi) Sterilization of tank by Echo-Friendly biodegradable and highly effective anti bacterial non toxic agent approved by NTC (National Toxicology Center) against all pathogens agent of tank clean.(vii) Sterilization of tank atmosphere by industrial UV radiator leaving the tank complete sterlite by specialized method (viii) After complete treatment is carried out, all inlet, over flow, delivery, wash out pipes, ladder and doors shall be painted with two coats of synthetic enamel black paint after thorough cleaning the surfaces and also the surfaces of sluice valves shall be painted with P.O. Red paintand writing \" capacity of tank, date of cleaning and due date of cleaning\" on wall as specified and as directed.Notes: (i)The work will be got executed from the reputed specialized water tank cleaner as approved by GE.(ii) All the sludge materials / fungus removed from the underground sump / semi underground sump and over head tanks will be removed outside defence land from the site.(iii) All underground sump / semi underground sum and overhead tanks will cleaned in all respect upto 3 mtr around the water tanks. (iv) All T & P required for the cleaning of tanks / Sumps will be arranged by the contractor. (v) The wire mesh of ventilations of the tank shall be replaced with new mesh.(vi) The cost of the same shall be deemed included in the respective items. |
| 140 | Supply, laying, jointing and testing in replacement of unserviceable CI/DIpipes specials of any size and any type completeof size upto 200mm dia , bend , Y junction , Tee, reducer, tail piece, spigot socketed/ spigot flanged/ flanged end/ plain end any type as required at site and aslaid in trenches,or floor/under road complete, all as specified and directed. Note :-Earth work in excavation, returning filling in and removal & joints shall be measured and paid separately under appropriate items of Schedule ‘A’ |
| 141 | Supply only Calcium based granular disinfectant for water treatment, more stable than chlorine gas, and stronger than Bleaching powder and sodium hypo chloridechemical moust have contained anti-corrosion and anti- scaling properties (CIAS) packing in 45 Kg Plastic drums. Make:Declibac Technologies or equivalent. |
| 142 | Labour only for checking the serviceability of the pipe line of any description and fixed in any position& replacement of un-serviceable/damaged/ broken parts either in single or in combination, dismantling and re-assembling the pipe fittings and making the pipe lines serviceable, fixing the pipe fittings in position, connecting to water supply and its testing on installation complete, all as specified and directed, by Engr-in-charge by emplooying one plumber and one helperby receving complaint slip from MES service centre and returning the same after completion thejob to MESauthority complete, all as specified and directed here in after in notes. |
| 143 | NOTES :-(i) Replacement of parts i.e nipple, union, elbow, bend, reducer & etc for 15/20/25/40/50mm GI pipe fittings, if any required at site, shall be measured and paid for separately under appropriate item of Schedule `A\" as ‘supply only.(ii) Necessary T&P i.e. ladder, tools etc required for checking and making the pipe fittings in serviceable conditions, its fixing in position and testing shall be arranged by the contractor at his own cost for checking and fixing of pipe fittings of any description onwalls /ground etc i.e. in any position at site.(iii)Requiredparts ie. thread/ adhesive etc and other minor items excluding the required spares parts for repairing and making the water supply line in serviceable condition, will be arranged & supplied by the contractor and cost of which is deemed to be included in the rates quoted by the contractor in above respective item.(iv) Contractor’s quoted rates is deemed to include for inspection/checking the serviceability of the pipe lineremoving the damaged unserviceable / broken parts, fixing the new parts as |
| 144 | Supply onlythe following parts for Water supply GIfittings complete, all as specified and directed. |
| 145 | Union 15mm bore |
| 146 | Union 20mm bore |
| 147 | Union 25mm bore |
| 148 | Union 40mm bore |
| 149 | Union 50mm bore |
| 150 | Elbow 15mm bore |
| 151 | Elbow 20mm bore |
| 152 | Elbow 25mm bore |
| 153 | Elbow 40mm bore |
| 154 | Elbow 50mm bore |
| 155 | Nipple 15mm bore and of any lengthupto 150mm |
| 156 | Nipple 20mm bore and of any lengthupto 150mm |
| 157 | Nipple 25mm bore and of any lengthupto 150mm |
| 158 | Nipple 40mm bore and of any lengthupto 150mm |
| 159 | Nipple 50mm bore and of any lengthupto 150mm |
| 160 | GI socket 15mm bore |
| 161 | GI socket 20 mm bore |
| 162 | GI socket 25 mm bore |
| 163 | Reducer 15X 20 mm |
| 164 | Reducer 15X 25 mm |
| 165 | Reducer 20X 25 mm |
| 166 | Reducer 25X 40 mm |
| 167 | Reducer 40X 50 mm |
| 168 | Tee 15mm bore |
| 169 | Tee 20mm bore |
| 170 | Tee 25mm bore |
| 171 | Tee40mm bore |
| 172 | Tee 50mm bore |
| 173 | Tee 15 x20mm bore |
| 174 | Tee 20 x25mm bore |
| 175 | Tee 15 x25mm bore |
| 176 | Tee25 x40mm bore |
| 177 | M & L for cleaning/ scraping ofsteel/ cast iron surfaces of existing dull painting ofpump/motor of 7.5/10/15/20HP capacity & pipe in side PH building upto 150mm dia & appx 5 RM connecting pipe lines and valves etc. and applying two coats of synthetic enameled paint over a coat ofred oxide primer by spray machine complete all as specified and directed. Note : The pump/motor, valves, connected pipe line etc. shall be painted according to colour code specified as per IS Instructions and as directed at site. |
| 178 | M & L for fabrication of Installation sign Board of size 900 X 600 made out of 3 mm thick MS sheet and position the same on 50 X 50 X 6 mm Angle iron frame & fixing on 2 Nos posts made out of 40mm dia medium grade GI pipe up to 150 cm height ( 105 cm above the ground level and 45 cm below the ground level) with necessary fixing arrangements such as bolts, nuts and washers incl painting the sign board except GI posts with one coat of red oxide paint and two coats ofsynthetic enamel paint over the primer & pasting of retro refactive High intensity Grade (HIG) 3 mtr blue sheet over the PGI sheet with white 0.5 incl border and weiting of information over board by cutting and pasting of letters, complete all as specified and directedby Engr-in-Chaarge.Make of PGI Sheet : TATA/SAIL . Note :- Information for pasting is approved by GE, all material and cutting ,pasting is deemed to be included in the rates quoted by the contractor in above respective item. |
| 179 | M & L for Cutting of the existing 80/100/ 150 mm bore of GI/ CI pipe line for rectifying leakage and reducing to required length, in position, for insertion of collars or Tee & other fittings including dewatering etc complete all as specified anddirected.Note :- CI fittings, jointing materials and earth work shall be measured and paid separately. How ever cost of dewatering is included in the quoted rates. |
| 180 | Collecting the sample of water from each source \"bore well\" and testing the sample for physical, chemical & bacteriological parameters and submitting the report in duplicate with comparison by IS-10500, complete for 29 parameter. |
| 181 | Disconnecting, dismantlingof air cooled Packaged type AC Plant 16.5 TR capacity complete with indoor and out door unit,strip opening, cleaning & descaling complete withdust cleaning equipment and servicing of the AC plant with usingcaustic soda/detergent powder solution, taking out and removing unserviceable/defective minor parts & wiring ,painting the bottom with one coat of black synthetic enameled paint of out-door unit, replacement ofair filters, belt and replacement of the unserviceable and defective minor parts, heater,brazing,reassembling and testing of the AC plantcomplete all as specified and directed.NOTE :-(i) The defective/nonfunctional minor parts will be replaced by the contractor under the unit rate quoted for this item.(ii) Charging of gas, if required, shall be measured and paid for separately under appropriate item of Schedule `A\".However, vacuum and pressure leakage testing with nitrogen (N2), if any required, is deemed to be included under the unit rate quoted by the contractor for this item. |
| 182 | Supply of lubricating oil anti freezing for refrigeration in factory sealed container of standardcapacityfor filling under Sch ‘A’items No 181 complete,all as specified and directed. Make: Servo froze -68-10c of IOC. |
| 183 | Supply fixing and testing in replacement of UNSVliqude line filtter driers of suitable sizefor Package type AC plant 16.5TR complete all as specified & directed. |
| 184 | Supply and fixing/testing in replacement of UNSVV belt \"A\" type as per existing for blower fan of packege type unit complete, all as specified and directed. |
| 185 | Supply and fixing/testing in replacement of UNSVcompressore5.5 tr makedenfoss/copland scrollcompressore R-407 with pressure testing complete, all as specified and directed. |
| 186 | Disconnecting & taking out existing defective blower motor Package type AC Plant of any description & in any position of size 2/3 HP, 415 volts strip opening for rewinding, removing for rewinding to & from to workshop, rewinding with appropriate size copper super enameled wire (Make : Atlas /Finolex /Devi Dayal )including suitable bearing, insulating material such as illuminous paper, Leatherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation & fixing the motor at siteincluding necessary connecting & testing at site complete all as specified and directed. |
| 187 | M&L for replacement of unserviceable remote control assembly with PCB plate complete with connections suitable for Package type AC 16.5 TR threephase capacity complete all as specified and directed .(Make : Carrier/Hitachi/LG ) |
| 188 | M&L for replacement of unserviceable condensing coil unit for Packagetype AC of any type/ any capacity complete, all as specified and directed.(Make : EMERSON COPELAND /L.G / HITACHI / TECUMSEH ) |
| 189 | Supply, fixing, connecting and testing in replacement of UNSVthermostate heating/cooling of any description complete,all as specified and directed. |
| 190 | Supply, fixing, connecting and testing in replacement of UNSV strip heater fins type, 3.0 KW, 230 volts, single phase, AC supply in any positioncomplete, all as specified and directed. |
| 191 | Supply fixing and testing in replacement of UNSV Pre filter with GI sheet frame of size 1000mm x 500mm x 8mm deep suitable for Pakage type units of air conditioning plantsincluding efficiency90% , down to 10-20microns, Initial Pressure drop- 2.5 mm WG, filter media shall be Synthetic Non Woven with Both Side HDPE Mesh, and t testing complete complete, all as specified and directed. |
| 192 | Dismantling & opening of GI sheet ducting from AHU for cleaning & descaling complete with air compressor, vacuum cleaning unit, dustcleaning equipment. The cleaning of duct to be started from AHU to different brances in different room.All the grills and diffusers are to be cleaned befor re-fixing. The rate shall also include cost of dismantling of false ceiling and its refixing, repair leakage ducts and refixing of ducts after complete cleaning process and testing etc. complete all as specified and directed.Note :- (i)Old disturbed insulation / leackage of ducts shall be made good by the contractor. |
| 193 | Disconnecting, dismantling and taking out the non-functional Air conditioner window type of any description, any make and in any position, 1.5 TR/2 TR capacity, single phase, 50 Hz, strip opening, cleaning and servicing of the AC with usingcaustic soda/detergent powder solution, checking serviceability of wiring & parts,painting the bottom with one coat of black synthetic enameled paint,brazing, reassembling and testing of the ACcomplete, all as specified and directed. |
| 194 | Supply only repaired compressor sealed unit of suitable capacity/ model in the unit properly for 1.5/2.0 TR window/Split type AC complete, all as specified and directed by Engineer-in-Charge. (Make : EMERSON COPELAND /L.G / HITACHI / TECUMSEH ) |
| 195 | Supply only blower motor including fan blade, capacitor complete suitable for Window type AC 1.5 ton/2.0 ton capacity 1/5 HP, 220 Volts, single phasecomplete, all as specified and directed. |
| 196 | Supply only blower motor including fan blade, capacitor complete suitable for split type AC 1.5 ton/2.0 ton capacity 1/8 HP, 220 Volts, single phasecomplete, all as specified and directed. |
| 197 | M&L for charging refrigerant gas in the system of window/Split type AC of 1.5/2.0 ton capacity complete, all as specified and directed.(Note : The refrigerant gas measured and paid separately under relevant items as applicable as ‘supply only’). |
| 198 | M&L for replacement of unserviceable Inverter PCB for outdoor complete with connections suitable for Split AC 1.5TR/2TR singlephase capacity complete all as specified and directed . |
| 199 | M&L for replacement of unserviceable running capacitor 36/45/50 MFD 230 V for window/Split type AC 1.5 Ton/2.0 Ton capacity complete, all as specified and directed. (Make : Universal/Sarda ) |
| 200 | M&L for replacement of unserviceable capillary tube and stainer for window/Split type AC of 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 201 | M&L for replacement of unserviceable PVC air filter for Split type AC of 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 202 | M&L for replacement of unserviceable fan blade for blower motor suitable for window /Split type AC 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 203 | Supply and fixing in replacment foam type insulation sleeve for copper tubing5/8\" / 1/2\"/ 3/8\" / 1/4\" dia (as per existing one) binding and securing the insulation firmly with copper tubing as per site requirement complete, all as specified and directed. |
| 204 | Dismantling of storage type water cooler of 40/80/150 ltrs capacity of existing modelin various location & servicing |
| 205 | Compressor sealed unit of 40/80 ltrs capacity |
| 206 | Supply only Remote control for split/ Window type AC of LG/Samsung/existingmake of 1.5 TR/2 TR with battery complete,all as specified & directed by Engineer-in-Charge. |
| 207 | M & L for dismantling of unserviceable voltage stablizer of capacity 3 KVA/4 KVA/5 KVA in various location for repair/replacement of unserviceable parts, cleaning, servicing, checking, reassembling, testing and handed over to MES in serviceable condition all as specifiedanddirectedby Engr-in-Charge (Note :- The spare parts measured and paid separately as supply only rates. Rates for fixing of spare parts under relevant items shall be included in item) |
| 208 | Supply only DC electronic circuit for relay of capacity 24/12 volts stabilizer for3 to 5KVA of approved make complete all as specified & directed. |
| 209 | Supply only 3 way connector 230 volts 50 Hz AC, 32 Amp of approved make & existing shape and size complete all as specified and directed. |
| 210 | Supply &Fixing in replacement of unserviceable wood wool pads best quality of required size as approved (three in each on desert cooler) complete all as specified and directed. |
| 211 | Supply &Fixing in replacement of unserviceable Water circulating pump 1/ 70 H P capacity single phase 230 volts, 1340 RPM, 1.5 Mtr head suitable fot any make any capacity of Desert coolerMake : AUE / CG/ Kaithan |
| 212 | Supply &Fixing in replacement of unserviceable plug top3 pin, 15/16 Amp capacity complete all as specified and directed.Make : Anchor (Penta deluxe) or equivalent as approved by GE. |
| 213 | Supply &Fixing in replacement of unserviceable Capacitor suitable for any type any capacity of desert cooler fan motor complete |
| 214 | Supply &Fixing in replacement of unserviceable Regulator for any type any make of Desert cooler |
| 215 | Disconnecting and removing the water and electric connections carefully from the existing Geyser of capacity 25/50 ltrs, any makeand taking out the same in any position from the existing location.cleaning and de-scaling the inner tank using de-scaling solution mixed with water in suitable proportion till the complete deposits /scale is removed as approved by Engineer-in-Charge, brazingfor stopping leakage of copper inner tank/gas welding for inner steel tank, re- assembling the complete Geyser after cleaning,Fixing and installation of Geyser in position and testing to the entire satisfaction of Engineer-in-Charge.Opening the Geyser for inspection, repairs and reassembling the same as per the original assembly after repairs/ replaceing the wourn out unserviceable parts with new parts as orderedincludingre-fixing same position of the Geyser and making electric connection, water inlet and outlet connection, testing andchecking of all the functioning of water inlet outlet valves connected with geysers.all as specified and directed by Engr-in-Charge. Note :- Spare parts if any requires replacement shall be measured and paid for separately. |
| 216 | Supply only Rubber PVC gasket to ensure water tightness for 25/50 liters capacity complete, all as specified and as directed by Engr-in-charge. |
| 217 | Supply only Heating element of the 1.5/2 KW rating as required at site including rubber washers of any make and type complete, all as specified and as directed. |
| 218 | Supply only Thermostatwith setting range 30°Cto80°Csuitable for230 volts AC, electric supply complete all as specified and directed, Make – Recold / Bajaj,/ Daspass |
| 219 | Supply only Non return valve 15 mm dia cast copper alloyISI mark complete, all as specified and as directed by Engr-in-charge. |
| 220 | Supply only Safety valve/Fusible plug 15mm complete, all as specified and as directed by Engr-in-charge. |
| 221 | Supply only Base assay complete with inlet, out let and pipes with drain plug and screw for fixing the element inclusive of clamps for holding the element with nut, bolt and washers fsuitable for 25 Liters cap to 50 Liters cap complete, all as specified and as directed by Engr-in-charge. |
| 222 | Supply onlyPVC connecting tube 450 mm long with two brass adopters suitable for 15 mm dia pipe and fixing in position ,superior quality as approved by Engineer-in-charge. |
| 223 | M&L in replacement of unserviceable Indicating lamp of size /shape as per existing suitable for 230 Volts AC supply. complete all as specified and directed |
| 224 | Disconnecting , taking down & removing carefully the existing ceiling fanetc. of any description, any sweep and from any position / locations (i.e. Md Accn/ OTM Accn/ Md Hostel/ Workshop/ Installations etc) for repairs / servicing / overhauling / painting / numbering etc., dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing , fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessaryadjustment and proper alignment of blades, hanging / fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of Engineer-in-Charge complete, all as specified and directed. |
| 225 | Disconnecting , taking down & removing carefully the existingexhaust fans etc. of any description, any sweep and from any position / locations (i.e. Md Accn/ OTM Accn/ Md Hostel/ Workshop/ Installations) for repairs / servicing / overhauling / painting / numbering etc., dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing , fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessaryadjustment and proper alignment of blades, hanging / fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of Engineer-in-Charge complete, all as specified and directed. |
| 226 | Supply only the following new parts suitable for the ceiling/ exhaust fans, wall bracket fans & pedestal fans, air circulating fans etc. of any description, any sweep :- Note :- Fixing & testing charges of these items are deemed to be included in the rates quoted by the tenderer for Sch ‘A’ item No. 224 and 225 above |
| 227 | Supplying only ball bearing No 6200 (Make SKF/NRB/NBC) |
| 228 | Supplying only ball bearing No 6201 (Make SKF/NRB/NBC) |
| 229 | Supplying only ball bearing No 6202 (Make SKF/NRB/NBC) |
| 230 | Supplying only ball bearing No 6203 (Make SKF/NRB/NBC) |
| 231 | Supplying only capacitor of capacity 2.5 mfd(PVC body) (Make:- EPCOS/JYOTI/ USHA) |
| 232 | Supply only complete hanging assembly set comprising with rubber reel, MS clamps, nuts, bolts with lock pins suitable for any type of fans & down rods of length 300mm. |
| 233 | Taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire (Make : Atlas/Finolex/Devi Dayal)as approved by the Engineer-in-charge including insulating material such as illuminous paper, Letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of Engineer-in-chargefor the following Fans:- |
| 234 | Rewinding of motor of ceiling fans 1200 mmsweep. |
| 235 | Rewinding of motor of ceiling fans 1400 mmsweep. |
| 236 | Rewinding of motor of exhaust fan of 230/300 mm sweep. |
| 237 | Rewinding of motor of wall mounted fan of 400 mm sweep. |
| 238 | Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed. (NOTE : Thickness after punning shall be measured for payment) |
| 239 | M&L for Un-reinforced precast concrete cable cover class LV type I, flat, size 250mm x 150mm x 40mm as proteciton to under ground cable laid dry flat adjoining each other complete all as specified and directed |
| 240 | M&L for Un-reinforced precast concrete cable cover class HV type I, flat, size 300mm x 180mm x 40mm as proteciton to under ground cable laid dry flat adjoining each other complete all as specified and directed |
| 241 | Fixing / laying only oldUn-reinforced precast concrete cable cover of any description as obtained from dismantling of the cable complete all as specified and directed. |
| 242 | Disconnecting and taking out old existing unserviceable/ non- functional LT Cable and Supplying, laying, jointing and testing cable XLPE insulated IS 7098 (Part-I)-1988 marked, screened, PVC sheathed, armoured electric power cable (heavy duty) with aluminum conductor for working voltage upto and including 1100 Volts, cross sectional area of under mentioned size of cables laid in trenches/fixed on pole/wall / passed through pipe complete all as specified and directed . Make:Havells/GLOSTER/Polycab) (NOTE: Earth work, sand cushioning, pipe, clamps for holding cables and brick protection shall be measured and paid separately ) |
| 243 | 10 Sqmm 2 core |
| 244 | 16 Sqmm 2 core |
| 245 | 16 Sqmm4 core |
| 246 | Re-laying LT cable Any size Obtained form Item No. 9 to 12 |
| 247 | Labour only for checking the serviceability of the different spares / components / parts of security light fittings/post top lantern light fittings (LED,HPSV, Metal Halide, flood lightfittings etc, any wattage/capacity) of any description and fixed in any position, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in position, connecting to electric supply and its testing on installation complete all as specified and directed here in after in notes.NOTES (i) Replacement of parts i.e Drivers,SPD, LED board,lamps, choke, Igniter, Condenser, Holder, covers etc for Street/Flood light fittings any wattage & capacity, if any required at site, shall be measured and paid for separately under appropriate item of Schedule `A\" as ‘supply only.(ii) Necessary T&P i.e. ladder, tools etc required for checking and making the light fittings in serviceable conditions, its fixing in position and testing shall be arranged by the contractor at his own cost for checking and fixing of street light fittings/security light fittings of any description on poles / on walls / on pillars etc i.e. in any position at site.(iii)Required screws, insulating tapes, internal wiring wire and other minor items excluding the required spares parts for repairing and making the street light fittings/security light fittings in serviceable condition, will be arranged & supplied by the contractor and cost of which is deemed to be included in the rates quoted by the contractor in above respective item.(iv)Contractor shall be paid only one time the labour charges quoted above in Schedule `A\" items for a particular fitting repaired irrespective of the number of times labour and resources arranged by him to check the serviceability of the fittings and replacement of unserviceable / defective parts in order to maintain the fittings in serviceable/working condition. (v) Contractor’s quoted rates for Schedule `A\" item No 9 is deemed to include for inspection/checking the serviceability of the fittings in position or by taking down as per site requirement, removing the damaged unserviceable / broken parts, fixing the new parts as required, fixing the fittings in same position or the other, connecting the fittings with electric source and testing of fittings as directed. |
| 248 | Supply onlythe following parts for LED fittings complete all as specified and directed. NOTES:(i) Fixing element of these items is deemed to be included in the rates quoted by the contractor.(ii) Spare parts/items shall be of make Crompton Greaves/Philips/Bajaj/Havells & suitable for the existing fittings.(iii) The above items shall be operated with prior written approval of GE and when required spares are not available with the deptt to issue to contractor under Sch ‘B’ “Free for fixing” and Contractor shall have no claim on account of non execution of above items. |
| 249 | Driver Suitable for 45/48Watt LED fittings.Make:C&S/Havells/Bajaj/Crompton |
| 250 | Driver Suitable for 60Watt LED fittings, Make:C&S/Havells/Bajaj/Crompton |
| 251 | Driver Suitable for 90Watt LED fittings,Make:C&S/Havells/Bajaj/Crompton |
| 252 | Driver Suitable for 100/120/150Watt LED fittings. Make:C&S/Havells/Bajaj/Crompton |
| 253 | Safety Protection Device (SPD). Make:C&S/Havells/Bajaj/Crompton |
| 254 | M&L for making holes in electric/street light poles of any height or in any shape, by means of drill machine and drawing of drawing of 1.5sqmm x3 core cable through the hole from junction box to the hole on the top of pole near the street light fitting complete with all electric connections complete all as specified and directed (Rates of the cable deemed to be included) |
| 255 | Taking down existingunserviceablebracket complete and S&F 40 mm dia GIlightgrade pipe bracket 1.50 m long bent to shape by cutting & weldingas required & directed and fixed to pole withtwo No,s of FI clamps 40x5 mm to be tightened with bolts, nut and washers and including painted withtwo coat of aluminium paint over a coat of red oxide primer complete all as specified and directed. Make of pipe TATA / Jindal / Swastik / Prakash / BSTor any other ISI marked make approved by GE. |
| 256 | Supply and fixing in replacement of UNSV 20W LED Post top lantern complete accessories to be fixed on pole/wall includingconnecting the fitting to control switch at the bottom of the pole with using 2.5 Sqmm two single core PVC insulated and unsheathed copper conductor cable complete,all as directed and directed. Make : Crompton/ Havells/ C&S/Bajaj). (Note :PCC work shall be measured and paid seperatly under Sch \"A\" relevent item and rate of cable deemed to be included ) |
| 257 | Supply and fixing in replacement of UNSV 40W LED Post top lantern complete accessories to be fixed on pole/wall includingconnecting the fitting to control switch at the bottom of the pole with using 2.5 Sqmm two single core PVC insulated and unsheathed copper conductor cable complete,all as directed and directed. Make : Crompton/ Havells/ C&S/Bajaj).(Note :PCC work shall be measured and paid seperatly under Sch \"A\" relevent item and rate of cable deemed to be included ) |
| 258 | Taking down old unserviceable MS junction boxes from the pole with disconnectiong all connections, Supplying and fixing in position new Pole box made of thermoplastic Polycarbonate having IP65/IP66 degree of protection (shock proof, dust proof, jet water proof and acid resistive). The gasket should be internally embedded, and made of Polyeutherene. The boxes shall be tested as per IEC 60670-2/ 60670-22. The boxes shall have self threaded holes & provision for mounting din rail. The lid should be hinged type with sealing screw. The screw should be of stainless steel so that there is no corrosion. The boxes should withstand temperature of -40c to +120c. The glow wire test should be conducted at 960 c or 750 c and material should be flame retardant & self extinguishing. UL subject 94, V-0. The boxes should be free from toxic substances like hal ogen and silicon. The boxes should have suitable pre-moulded knock out /or plan wall depending on requirement. Box dimension shall not be less than 200 X 160 X98 MM (LXBXH). Box shall be suitable for 16/25Sqmm cables including one no. MCB SP 230 volts 6 amps of make Havells/Legrand/ABBand connecting the bus bars to cables withusing suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5mm FI clamps,nuts,bolts & washers complete all as specified and directed. Make: Hensel/GE/Legrand/ Sintex |
| 259 | M & L for cutting chases in hard standing road/path/drain etc for passing cables/pipes etc. size of cutting 100mm wide and 200mm deep and removing the excavated materials and disposal at 50 metre distance and making good the cutting after the pipe and cables are laid with PCC 1:3:6 type C-1 using 20mm graded stone aggregates complete all as specified and directed. |
| 260 | Supply, fixing & testing in replacement of UNSV15W LED street light with corbonate cover with high inpact resistance, 15 W-1500 lumens with efficacy of 100 lumans /wall at system level, ingress protection of IP65 PF-0.9 & with input resistanct i.e.IK 09 surge protectin upto 4KV,compiled withIS 10322 CCT is greater than 5000K,complete with all accessories duly prewired, supply and fixing the bracket of 40 mm dia 60 cm long GI pipe light grade bent to shap and including MS FI clamp of 20X3 mm nut and bolts and connected with flexible cable 3 core copper conductor 0.5 Sqmm upto ceiling rose complete mounting on existing MS frame bracket including connecting the fitting complete, all as specified and directed.(Make-Crompton / Havells/C& S/Bajaj). (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch \"A\" relevent item) |
| 261 | Supply, fixing & testing in replacement of UNSV45W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing MS framebracketincluding connecting the fittingcomplete all as specified and directed.(Make-Crompton / Havells/C& S/Bajaj). (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch \"A\" relevent item) |
| 262 | Supply, fixing & testing in replacement of UNSV60W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing MS framebracketincluding connecting the fittingcomplete all as specified and directed.(Make- Crompton /Havells/C& S/Bajaj). (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch \"A\" relevent item) |
| 263 | Supply, fixing & testing in replacement of UNSV90W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing MS framebracketincluding connecting the fittingcomplete all as specified and directed.(Make- Crompton /Havells/C& S/Bajaj). (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch \"A\" relevent item) |
| 264 | Supply, fixing & testing in replacement of UNSV120W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing MS framebracketincluding flexible cable 3 core copper conductor 0.5 Sqmm upto ceiling rose complete mounting on existing MS frame bracket including connecting the fitting complete all as specified and directed.(Make- Crompton / Havells /C& S/Bajaj). (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch \"A\" relevent item) |
| 265 | Supply, fixing & testing in replacement of UNSV 120W LED Flood light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing 16 mtrs High Mast/11 mtrs pole /9 mtrs poleor Bldg MS frame/bracketincluding connecting the fittingcomplete all as specified and directed. (Make- Crompton/Havells/C& S/Bajaj).(Note : GI pipe bracket shall be measured and paid seperatly under Sch \"A\" relevent item) |
| 266 | Supply, fixing & testing in replacement of UNSV LED highbay/mediumbay LED IP 65 luminaire with high efficiacy light fittings 150 watts with all aecessaries complete on Pole and building wall/ ceiling complete, all as specified and directed.(Make- Crompton/Havells/C& S/Bajaj). |
| 267 | Dismantling and opening of spare parts for servicing of water cooled DG set of following capacity coupled with alternator, Maintenance and servicing mechanically and electrically, including cleaning, oiling /greasing,removing & replacement of defective / unserviceable parts with new parts,i.e diesel filter /oil filter /Air filter /fan belt /fuel pipe/ engine oil pipe /Engine Oil/distilled wateretc as required at site andas per manufacturer\"s instructions and checking of valves & nozzles etc, reassembling the parts of DG set at position ensuring proper alignmentconnecting to existing system and making DG set perfectly operational and testing at site connected load to the entire satisfaction complete all as specified and directed. (including mentioned inNote here in below)Notes:-(i) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts.The new replaced parts shall bemeasured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, locking nuts, small springs, `O’ rings, screws/gaskets/ packing /studs etc.(ii) Engine oil shall be drained out carefully, collected by the contractor in his own suitable containers and stored properly for checking serviceability including cleaning of oil sump by pouring kerosene oil all as directed by the Engineer-in-Charge(iii) Fresh engine oil for DG sets shall be supplied by the contractor as “ Supply only” and shall be measured and paid separately under appropriate item of Sch ‘A’ . Its cost of filling is deemed to be included under the rates quoted by the contractor for above item. |
| 268 | 75 KVA to 100KVA,3 phase 50 HZ,Make: CUMMINS/Kirloskar |
| 269 | Supply only element diesel filter with gasket suitablefor following capacity of DG set dismantled / fixed under Sch `A` item No38.00 here in above complete all as specified and directed. |
| 270 | 75 KVA to 100KVA,3 phase 50 HZ,Make: CUMMINS/Kirloskar |
| 271 | Supply only element Oil filter with gasket suitablefor following capacity of DG set dismantled/fixed under Sch `A`item No 38 here in above complete all as specified and directed. |
| 272 | 75 KVA to 100KVA,3 phase 50 HZ,Make: CUMMINS/Kirloskar |
| 273 | Supply only Air cleaner element primary and safety for following capacity of DG set dismantled/fixed under Sch `A` item No38 here in above complete all as specified and directed. |
| 274 | 75 KVA to 100KVA,3 phase 50 HZ,Make: CUMMINS/Kirloskar |
| 275 | Supply only element bypass filter with gasket for 75 KVA to 100 KVA capacity DG Set dismantled/fixed under Sch `A` item No 38 here in above complete all as specified and directed. |
| 276 | Supply,installation,testing and commissioning in replacement ofunserviceableAVR unit suitablefor 3 phase 50 HZalternator suitable for 100 KVA to 500KVA capacity of DG set complete all as specified and directed. |
| 277 | Dismantling and taking out the radiator fitted infollowing capacity of DG sets and strip opening complete radiator assembly,for servicing mechanicallyandproper cleaning of tubes with using de-scaling solution,including repair of water tubes and top/ bottom tanks by soldering / gas welding of leakage of tubes/tanks. including replacement of gasket, nut bolts,etc ensuring perfectly leak proof after servicing of radiator,re-assembling and fixing the same in position and testing the system complete all as specified and directed .Notes :- (i) Repairs/servicing/re-assembling and testing of radiator shall be carried out through a authorised representative of manufacturer. (ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts.The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, gaskets/ packing etc.(iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre. |
| 278 | 75 KVA to 100KVA,3 phase 50 HZ,Make: CUMMINS/Kirloskar |
| 279 | Supply only the following items/spare parts suitableforraditor of DG setof the following variuos capacity dismantled/fixed under Sch `A` item No 277 here in above complete all as specified and directed.Note :- (i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A\" item No 277 here in above.(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item. |
| 280 | Radiator hose set with clamp complete set for 75 KVA to 100KVA 3 phase 50 Hz DG Set. |
| 281 | Water pump assembly complete set for 75 KVA to 100 KVA, 3 phase 50 Hz DG set |
| 282 | Supply only concentrated coolent suitable for radiator of DG setany capacity drained out / filling under Sch `A`item No50 here in above complete all as specified and directed. |
| 283 | Supply only lubrication oil SAE-40 ( 20 W- 40 grade) suitablefor Engine of DG setany capacity drained out / filling under Sch `A` item No50 here in above complete all as specified and directed. |
| 284 | Supply only distilled water complete all as specified and directed. |
| 285 | Dismantling and taking out the PT fuel system including injectors assembly fitted in following capacity of DG sets 3 phase 50 HZof DG setand strip opening of PT fuel system including injectors assemblyfor carrying out repair/ servicing /overhauling mechanically ,cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, complete and calibration of Fuel Injection after repair/ servicing /overhauling and re-assembling and fixing the same in position and testing complete all as specified and directed .Notes :- (i)Repairs/servicing / reassembling and testing of Fuelinjectorpump shall be carried out through a authorised service center ontesting machine.(ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts.The new replaced parts shall bemeasured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, shim, small springs, `O’ rings, screws/gaskets/ packing /studs etc. (iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre. |
| 286 | 75 KVA to 100KVA3 phase 50 HZ, Make: CUMMINS/Kirloskar |
| 287 | Dismantling and taking out the self starter,12 Volt DCfitted in10to 62.5 KVA 3 phase 50 HZof DG setsand strip opening of Self starter 12 Volt DC for carrying out repair/ servicing /overhauling mechanically ,cleaning, oiling/greasing/varnishing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, complete and re-assembling ofSelf starter 12 Volt DC after repair/ servicing /overhaulingand fixing the same in position and testing complete all as specified and directed .Notes :- (i)Repairs/servicing / reassembling and testing of Self starter 12 Volt DC shall be carried out through a authorised service center .(ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts.The new replaced parts shall bemeasured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, shim, small springs, screws/gaskets/ packing /studs etc. (iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre. |
| 288 | Dismantling of Old unserviceable batteries 12 Volt, 150 AH, from DG set and supply & fixing maintenance freebatteries of 12 Volt, 150 AH capacity with electrolyte fully charged batteryincluding interconnection, commissioning and testing complete all as specified & directed. |
| 289 | Supply only the following items/spare parts suitableforself starter, 12 Volt DCfitted in 10 KVAto 100 KV 3 phase 50 HZ of DG set , dismantled/fixed under Sch `A` item No 287 here in above complete all as specified and directed.Note :- (i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A\" item No 287 here in above.(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item. |
| 290 | Solenoid switch suitable for self starter, 12 Volt DC |
| 291 | Commutator suitable for self starter, 12 Volt DC |
| 292 | Carbon brush suitable for self starter, 12 Volt DC |
| 293 | Field coils suitable for self starter, 12 Volt DC |
| 294 | Bendix pinion assembly suitable for self starter, 12 Volt DC |
| 295 | Bushesuitable for self starter, 12 Volt DC |
| 296 | Bushesuitable for self starter, 24 Volt DC |
| 297 | Disconnecting and taking out the exhaust system of DG set of any capacity between 75 KVA to 100 KVAand carrying out cleaning of choked, carbonized exhaust pipe including exhaust silencer , including soldering / welding of leakage of pipe.and assembling the complete exhaust assembly including replacement of exhaust manifold gasket side pieces, metallic flexible pipe,nut bolts, and testing for making it leak proof and fixing the same in position and testing the system complete all as specified and directed complete all as specified and directed. |
| 298 | M & L for Cleaning of MS fuel tank of DG sets of 100 to 300 ltr capacity by collecting the fuel in cleaned barrels and removing sludge deposited/accumulated inside the tank of and disposal of sludge at a distance not exceeding 100 metre and cleaning the tank with kerosene oil , replacement of fuel tank strainer and unserviceable fuel gauge with new PVC fuel level indicator fixed with clips to the tank and marking levels for every 10 litre by marking and numbering on the side of fuel tank with synthetic enameled paint and refilling the collected fuel after filtration complete all as specified and directed. |
| 299 | Disconnecting and taking out old unserviceable belts of the DG set and supply and fixing newbelt suitable forfollowing capacity of DG set engine match the existing complete all as specified and directed. |
| 300 | V Belt for Fan drive ,Charging alternator and water pum complete set suitable for DG Set 75 to 100 KVA |
| 301 | Supply and fixing reverse-forward controll switch 3 phase 16 Amp for high mast lighting system all as specified and directed. |
| 302 | M&L for construction of brick masonry valve pit of size 120cm x120 cmx90cm (internal dimention) with necessary excavation , returing filling in, steel work for cover using MS sheet 3 mm thick welded/hinged MS angle iron 40x40x6mm forged flat iron hinges, sliding type lifting handle of MS bar 12 mm diaall as per shown in drawing No TD/EM/12 complete all as specfied and directed. |
| 303 | Supplying, Laying, testing and commissioning in replacement of UNSV XLPE insulated, PVC sheathed (heavy duty) armoured shieldedcable with aluminium conductor for working voltage upto 11KV (Earthed) ,conforming to IS 7098 Part-II amended upto date complete, having cross sectional area under mentioned size of cables laid in trenches/fixed on pole/wall / passed through pipe including making necessary connection with VCB/OCB/ 4 pole/2 pole structure etc. complete all as specified and directed. Make:Havells/CCI/ICL/GLOSTER/Incab/Nicco/Polycab/Plaza) (NOTE: Earth work, sand cushioning, pipe, clamps for holding cables and PCC protection shall be measured and paid separately ) |
| 304 | 95 Sqmm3core |
| 305 | 120 Sqmm 3core |
| 306 | Re-laying HT cable Any size Obtained form Item No 303 to 306 |
| 307 | Supplying, Laying, testing and commissioning in replacement of UNSV XLPE insulated,IS 7098 (Part-I)-1988 marked screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 1100V grade cross section area of the under mentioned size of cables laid in trenches/fixed on pole/wall / passed through pipe including making necessary connection, with busbar/MCCB/DB\"s & testing complete, all as specified anddirected. Make:Havells/CCI/ICL/GLOSTER/Incab/Nicco/Polycab/Plaza) (NOTE: Earth work, sand cushioning, pipe, clamps for holding cables and brick protection shall be measured and paid separately ) |
| 308 | 25 Sqmm 3½ core. |
| 309 | 35 Sqmm 3½ core |
| 310 | 50 Sqmm 3½ core |
| 311 | 70 Sqmm 3½ core |
| 312 | 95 Sqmm 3½ core |
| 313 | 120 Sqmm 3½ core |
| 314 | Re-laying LT cable Obtained form Item No 307 to 314 (Any size) |
| 315 | Supplying, laying & jointing in replacement of UNSV GI water tubing, under mentioned bore, light grade as in sleeving etc laid in trenches / ducts etc.complete all as specified and directed. (MAKE : TATA/JINDAL/TT SWASTIK) |
| 316 | 100 mm bore |
| 317 | 80 mm bore |
| 318 | 50 mm bore |
| 319 | Disconnecting and taking out old Unserviceable HT joint complete and Supply , jointing and testing cable jointing kit of 11 KV (Earthed) grade cable for indoor termination, heat shrink type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sq mm complete all as specified and ditected. |
| 320 | Disconnecting and taking out old Unserviceable LT joint complete and Supply , jointing and testing cable jointing kit of 1100 V (Earthed) grade cable for outdoor termination, heat shrink type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sq mm complete all as specified and ditected. |
| 321 | Disconnecting and taking out old Unserviceable HT joint complete and Supply , jointing and testing cable jointing kit of 11 KV (Earthed) grade cable for straight through, heat shrink type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sq mm complete all as specified and ditected. |
| 322 | Supplying, Fixing, jointing and testing for provision of straight through joints, epoxy type with epoxy jointing materials, suitable for XLPE, LT Cable, 1100 Volts grade, for the following sizes of cablesall as specified and directed by the Engineer-in-Charge. (MAKE : M.SEAL/DENSON/ MAHINDRA CHEMICALS/3M) :- |
| 323 | 70 Sqmm3½ core |
| 324 | 95 Sqmm 3½ core |
| 325 | 120 Sqmmto150 Sqmm 3½ core |
| 326 | 185 Sqmm 3½ core |
| 327 | Supply , Install and testing in replacement of unserviceable insulatorspin type porcelain, vitreous, white, brown or green insulators,for working pressure 11000 volts of size 150mm height and 150 mm dia including one galvanized mild steel spindle two galvanised iron washers and one galvanised iron nut, etc for HT lines fixed on poles complete all as specified and directed. |
| 328 | Supply , Install and testing in replacement of unserviceable disc type porcelain, vitreous, white, brown or green insulators,for working pressure 11000 volts of size 145mm height and 255 mm dia includingtwo in series assembly for tension with tension clamps for conductors, etc for HT lines fixed on poles complete all as specified and directed. |
| 329 | Supply , Install and testing in replacement of unserviceable HT 11kV vertical swing triple pole gang operated air break switch (GOD) consisting of twelve insulator (3 insulators in each phase and one each for DO fuse).Mounted over the MS channel frame, operating mechanism, operating handle GI medium grade 25 mm bore, 5 mtr long with locking arrangement system connected with operating handle and 7 leaver lock of Godrej, moving and fixed jaws,copper jumpher strip etc suitable for 11000 volt 200 Amp current rating all as specified and directed at site. |
| 330 | Supplying,Straightening and Stringing in replacement of UNSValuminum conductor steel reinforced (ACSR) conductor off size including jointing the conductor with new conductor on existing HT/LT pole and binding to insulator with the new aluminium wire binding wire 2 mm dia making and connecting jumper connections etcincluding connecting commissioning and testing complete all as specified and directed. |
| 331 | Supplying, Straightening and Stringing in replacement of UNSVGuard/ cradles hexagonal/ rectangular, fabricated in replacement of UNSVgalvanized steel wire 3.15 or 4mm dia . complete all as specified and directed. |
| 332 | Restringing of HT existing over head line of ACSR conductor after disconnecting from the insulators & jumpers to the required tension & sag & binding up & connecting to insulators & jumpers properly testing complete, including chopping off tree branches (coming in the way line) complete all as specified and directed. |
| 333 | Description all as per item No 47 above here-in before, but for GI wire complete, all as specified.Notes:-For item No 46 & 47(i) The quoted rate is inclusive of the cost of Setting /adjusting of cradles in positions. Adjusting & tighting of stay assembly where ever required. (ii)The quoted rate is inclusive of the cost of oldserviceable jumper of ACSR conductor shall be reused and fixed. (iii) The quoted rate is inclusive of the cost of Cutting/trimming of tree branches along with the exisitng HT/LT overhead line 2 mtr clearence from all sides of ACSR conductor including removal from the site.(iv)Single conductor shall be considered for measurement in RM. |
| 334 | M&L in replecement of UNSVjumper with weasel conductor suitable for HT/LT, 11000 /1100 volts grade required at site with suitable size of luge on both end including proper crimpinf etc.complete all as specified and directed. |
| 335 | Supply & fixing in replacement pin type porcelain, vitreous, white, brown or green insulators, including one galvanized mild steel spindle two galvanised iron washers and one galvanised iron nut, 100mm height and 65mm dia suitable for working pressure upto and including 1100 volts grade for LT lines fixed on poles complete all as specified and directed |
| 336 | Supply and fixing in replacement shackle type porcelain vitreous, white, brown or green insulator for working pressure 1100V of 115mm dia and 100mm high including galvanized mild steel strip 31 x 3mm, insulator bolts 14mm dia washer and nutfor LT lines fixed on poles complete all as specified and directed |
| 337 | M&L in replecement of UNSVthe 4 wire LTPVC separator complete all as specified and directed |
| 338 | M&L in replecement of UNSVthe 2 wire LTPVC separator complete all as specified and directed |
| 339 | S& F in replacement of UNSV lugs after cutting the worn out /faulty cable end from LT pillar/panel box including necessary earth work for taking out the cable from loop retuning, filling & making cable lead by providing Aluminium lugs lead including crimping with crimping tools in the existing LT cable including necessary connection complete all as specified and directed |
| 340 | Up to 50 Sq mm |
| 341 | From 70 Sq mm to 120 Sq mm |
| 342 | From 150 to 185 Sq mm |
| 343 | From 240 to 300 Sq mm |
| 344 | Material and labour for cleaning and preparation of all existing steel surfaces ofpole structure of straight steel tubular poles 09 mtrs long for painting including mild steel cross arms, clamps and anti clibing device,protection pipeetc and applying one coat of aluminium paint all round the exposed steel surfaces of existing steel tubular poles structure of any description and in any position above the height of 1.50 mtr from the plinth of the pole and applying one coat of synthetic enameled paint of different colours in strips of 150mm width upto the height 1.5 mtr from the plinth of poles including writing pole No and other sign works with white paint over black painted base in the pattern and style as approved by GE and complete all as specified and directed, Note : Size of black painted base for numbering shall be 100mmx25mm and the size of numbers shall be not exceeding 10cm height. |
| 345 | Material and labour for cleaning and preparation of all existing steel surfaces ofpole structure of straight steel tubular poles 11 mtrs long for painting including mild steel cross arms, clamps and anti clibing device,protection pipeetc and applying one coat of aluminium paint all round the exposed steel surfaces of existing steel tubular poles structure of any description and in any position above the height of 1.50 mtr from the plinth of the pole and applying one coat of synthetic enameled paint of different colours in strips of 150mm width upto the height 1.5 mtr from the plinth of poles including writing pole No and other sign works with white paint over black painted base in the pattern and style as approved by GE and complete all as specified and directedNote : Size of black painted base for numbering shall be 100mmx25mm and the size of numbers shall be not exceeding 10cm height. |
| 346 | M & L for PCC 1:2:4 type B2 with 40mm grade stone aggregate as in foundation for outstanding around pole near feeder pillar/LT panel foundation of stays, including form work, fair finishing to exposed surface complete all as specified and directed |
| 347 | M&L for PCC 1:4:8 type D2 with 40 mm graded stone aggregate as in foundation for hard standing aroundpole& near feeder pillar/LT panel foundation of stays, including form work, fair finishing to exposed surface complete all as specified and directed |
| 348 | M&L for PCC 1:3:6 type C2 with 40 mm grade stone aggregate for coping of poles,stays incl. form work complete all as specified and directed |
| 349 | M&L for Brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radious built in cement mortar (1:6)complete all asspecified and directed. |
| 350 | M&L for Rendering 15 mm thickof external surfaces of concrete/brick in cement morter 1:4 mixed withwater proofing compound as per manufacturer\"s instruction, finished fair and even without using extracement complete all as specified and directed. Note :- WPC shall be measured and paid seprately as supply only under respective item of Sch \"A\"/BOQ |
| 351 | M & Lfor spreading crushed/hand broken 20/ 40 mm graded sand stone aggregate around and under 4 pole/ 2 pole structure/11 KV Yard uniformally complete, all as specified and directed. Note :- (i) Excavation of earth work will be measured & paid separately under relevant items. (ii) Spread thickness of aggregates shall be measured and cubical content shall be worked out with deduction of 50% for voids for arriving at net qty. |
| 352 | M&L in replacement of UNSV danger notice board and Supply and fixing new danger notice board size 250mmx200 mm made out of 1.6 mm thick mild steel sheet, suitable for 11KV HT line and applying two coats of synthetic enameled paint (red colour) over a coat of red oxide primer including writing letters,figures and conventional skull and bones of suitable size on board in standard pattern as per IS fixed with and includingMS clamps made out of mild steel flat iron,bolts ,nuts and washers etc complete all as specified and directed |
| 353 | Disconnecting and taking out existing HT 11KV VCB/OCB from housing and cleaning, rubbing and overhauling the mechanical parts incl Greasing oiling replacement of UNSV trip coil, breaker charging motor, gear panion, roller switch, Big gear etc and re-assembling the same after replacement as required and made the VCB serviceable including making all electrical connection and testing & calibration(IR Test, Continuity test, Tripping test of earth fault and Over current of panel )alongwith control panel and control wiring, protection system and relays by primary & secondary injection system bank/battery chargers/DC system complete all as specified and directed.Note :-(i): Any parts required for replacement to make the breaker serviceable will be measured and paid separately under appropriate item of Sch ‘A’ as supply only but fixing charges of the parts replaced/repaired is deemed to be included in these item(ii) All other accessories excluding sch item No:353be supplied and fixed by the contractor at his own arrangement.(iii) calibration & testing will be carried out by machine which will be arranged by the contractor under his own arrangement. |
| 354 | Supply only the following items / spare parts suitable for 11 KV VCB, 200/800 Amps capacity of any make,dismantled/fixed under Sch ‘A’ item No.353 here in above complete all as specified and directed . |
| 355 | Vacuum Interrupter |
| 356 | Bushing (Female) |
| 357 | flexible connectors |
| 358 | Closing coil assembly30/24 volts DC. |
| 359 | Tripping coil assembly30/24 volts DC. |
| 360 | Heating element with thermostat switch 150 Watt compact type |
| 361 | Motor cut off limit switch. |
| 362 | Spring charge motor, single phase suitable for spring charge motorised mechanism |
| 363 | Auxilary switch (6 NO + 6 NC ). |
| 364 | 11 KV bus insulator of suitable for 11 KV VCB/OCB Panel complete all as specified and directed |
| 365 | Supply, install, testing and commissioning in replacemen of UNSVtripping coil DC 30 V for 11 KV VCB complete all as specified and directed |
| 366 | Supply, install, testing and commissioning in replacemen of UNSV closing coil, DC 30V for 11 KV VCB complete all as specified and directed |
| 367 | Supply, install, testing and commissioning in replacemen of UNSV Trip push button for 11 KV 400 Amps OCB complete all as specified and directed |
| 368 | Supply, install, testing and commissioning in replacemen of UNSV Ammeter Digital type 144sqmm with CT ration 100/5 and current rating 0-50Amps and selector switch for panel complete all as specified and directed |
| 369 | Supply, install, testing and commissioning in replacemen of UNSV Ammeter selector switch 10A/440 Volt for 11 KV VCB Panelcomplete all as specified and directed |
| 370 | Supply, install, testing and commissioning in replacemen of UNSV Voltmeter square type Digital of size 144Sqmm of capacity 0 to 15 KV PT Ratio 11KV/110Volt for panel complete all as specified and directed |
| 371 | Supply, install, testing and commissioning in replacemen of UNSV Voltmeter selector switch 10A/440 Volt for 11 KV VCB Panel complete all as specified and directed |
| 372 | Supply, install, testing and commissioning in replacemen of UNSV 11 KV panel indicating lamp fitting LED type suitable for 24 volt/30volt DC complete all as specified and directed |
| 373 | Supplying and fixing MCCB, 400 Amps, 4 pole, 415 Volts, AC supply,having breaking capacity Ics = 100% of Icu 35/36 kA with adjustable thermal & magnetic setting, of Make : Legrand/Indo Asian/Schnieder/Havells Cat No-IHLLSECF0400. |
| 374 | Supplying and fixing in replacement MCCB, 250 Amps, 4 pole, 415 Volts, AC supply,having breaking capacity Icu = 35/36 kA with adjustable thermal & magnetic setting, of Make : Legrand/Indo Asian/Schnieder / L&T / Havells Cat No-IHLLSECF0250 |
| 375 | Supplying and fixing in replacement MCCB, 200 Amps, 4 pole, 415 Volts, AC supply,having breaking capacity Icu = 35/36 kA with adjustable thermal & magnetic setting, of Make : Legrand/Indo Asian/Schnieder / L&T / Havells Cat No-IHLLSECF0200 |
| 376 | Supplying and fixing in replacement MCCB, 100 Amps, 4 pole, 415 Volts, AC supply,having breaking capacity Icu = 25 kA with fixed thermal & magnetic setting, of Make : Legrand/Indo Asian/Schnieder / L&T |
| 377 | Supplying, fixing in replacement testing and commissioning in replacement of front operated ON Load type changeover switch 4 pole, 415 volts, 125 Amps with and including sheet enclosurecomplete all as specified and directed. Cat part No:IHCNFO0125 of make Havells or equivalent in Legrand/Indo Asian/Schnieder / L&T |
| 378 | Supplying, fixing, in replacement testing and commissioning in replacement of front operated ON Load type changeover switch 4 pole, 415 volts, 200 Amps without sheet enclosure complete all as specified and directed.Cat part No:IHCNFO0200 of make Havells orMake Indo Asian equivalent in Legrand/Indo Asian/Schnieder / L&T |
| 379 | Supplying, fixing in replacement testing and commissioning in replacement of of side operated OFF Load type changeover switch 4 pole, 415 volts, 400 Amps with and including sheet enclosurecomplete all as specified and directed. Cat part No:IHBFFE0400 of make Havells or equivalent in Legrand/Indo Asian/Schnieder / L&T |
| 380 | Dismantling, taking down and removing the old existing un serviceable non-functional / broken hinges of any description and in any position of existing feeder pillar boxes/panel boards/feeder pillar boxes etc and supplying and fixing new cold rolled 50 mm long medium weight mild steel butt hinges in position with necessary spot welding etc including making necessary adjustment for free and smooth movement of panel and locking arrangements complete all as specified and directed.(Note :- Each hinge point shall be measured as one unit. ) |
| 381 | Dismantling, taking down and removing the old existing un serviceable non-functional / broken hinges of any description and in any position of existing feeder pillar boxes/panel boards/feeder pillar boxes etc and supplying and fixing new cold rolled 100 mm long medium weight mild steel butt hinges in position with necessary spot welding etc including making necessary adjustment for free and smooth movement of panel and locking arrangements complete all as specified and directed.(Note :- Each hinge point shall be measured as one unit. ) |
| 382 | Material, labour,testing and commissioning in replacement of UNSV indication lamp (LED type) with showing red, yellow and green in colour of 22.5 mm dia monitor on LT panel board suitable for 240 V AC supply complete all as specified and directed. Make : L&T /Binay.or equivalent approved. |
| 383 | Material, labour,testing and commissioning in replacement of UNSV of digital electronic volt meter 0-500 V range suitable for LT 415 Volts panel flush pattern square type 96mmX96mm with adopter complete with button complete all as specified and directed. Make : ENERCON/AENote :- The rate quoted shall be deemed to including the following:-(i) Control wiring for auxiliary supply 230 Volts AC if required.(ii) Cutting the sheet of the panel to suit with existing panel if required.(iii) Calibration and testing the meter. |
| 384 | Material, labour,testing and commissioning in replacement of UNSV of digital electronic ammeter double ratio with 5 Amps secondary current of any range flush pattern sequence type 96mmX96mm with adopter suitable for existing CT ratiofor maintaining on LT 415 Volts panel complete built in selector switch including taking the old unserviceable Ammetercomplete all as specified and directed, Make : ENERCON/AE. Note :- The rate quoted shall be deemed to including the following :-(i) Control wiring for auxiliary supply 230 Volts AC if required.(ii) Cutting the sheet of the panel to suit with existing panel if required.(iii) Calibration and testing the meter. |
| 385 | Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead 32X 6 mm GI strip, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate No . of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh incl necessary excavation and earth work in any type of soil, and PCC (1: 3 : 6) type C-1 (using 20 mm graded black trap/ granite/ Basalt stone aggregate) for earth pitwith 40x40x6 mm mild steel angle iron frame for cover and 40 mm thick precastRCC cover in 1 : 2 : 4 type B1(using 20 mm graded black trap/granite/ basalt stone aggregate) with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle, completeall as specified & directed . |
| 386 | Material and labour in replacement of UNSV GI strip of size 32mm x 6mm for laying along the wall/roof on batten or burried in ground or drawn in conduit pipe or fixed to poles or any other situation as directed or as required GI strip of size 32mm x 6mm earth continuity conductor complete with all accessories such as porcelain insulators, saddles and fixing screw etc for conductor complete all as specified and directed |
| 387 | Disconnecting defective transformer indoor/outdoor of any capacity up to 400 KVA both from HT/LT sides, and then drainage of complete transformer oil. Opening of top cover with due care and removal of all HT/LT winding connections from bushing and then lifting of core by means of tripod and chain pulley with due care for inspection and ascertain it’s serviceability state after keeping it aside. Removal of all sludge and unwanted material from tank and core, lowering of core assembly after carrying out required repairs to the winding and core. In case the repairs which are not possible at site then the transformer has to be taken to the work shop for repairs complete, all as specified and directed.Note :-(i)The cost of transportation shall be paid separately. (ii)The cost of rewinding shall be paid separately. |
| 388 | Taking down of transformers of capacity 63 to 400KVA fromtransformer plate form/2/4 pole structure with due care after disconnecting allHT/LT connections on poleand then lowering it by means of tripod and chainpullyand remounting on transformer plate form /2/4 pole structure after repairs complete all as specified and directed |
| 389 | Lifting of Indoor/Outdoor transformerfrom PCC plateform/2/4 pole structure of concerned substation with the help of mobile crane , loading on truck for transporting to civil workshop at Dehradun city & unloading at workshop, transporting back from workshop after repairs to its existing location complete all as specified and directed. |
| 390 | Material and labour for replacement of worn out HT copper coils made out of super enamelled insulated copper wire all as per existing size and shape including all insulating, binding,varnishing and baking if required complete all as specified and directed. |
| 391 | Material and labour for replacement of worn out LT copper coils made out of super enamelled insulated copper strip all as per existing size and shape including all insulating, binding,varnishing and baking if required complete all as specified and directed. |
| 392 | Re-conditioning ofexisting HT/ LT copper coils made out of super enamelled insulated copper strip/ wire by providinginsulating, binding,varnishing and baking if required complete all as specified and directed. |
| 393 | Material and labour for replacement of worn out bushing rod made out of copper with heavy duty double nuts and one washer at both ends suitable for HT side all as exiting size, shape and length complete all as specified and directed suitable for following capacity transformers ;- |
| 394 | 100-200 KVA Transformers. |
| 395 | 250-400 KVA Transformers. |
| 396 | Material and labour for replacement of worn out bushing rod made out of copper with heavy duty double nuts and one washer at both ends suitable for LT side all as exiting size, shape and length complete all as specified and directed suitable for following capacity transformers ;- |
| 397 | 100-200 KVA Transformers. |
| 398 | 250-400 KVA Transformers. |
| 399 | Material and labour for replacement of worn out porcelain bushing for 11KV HT side indoor /outdoor transformers with rubberised cork sheet washers all as required at site complete all as specified and directed suitable for following capacity transformers:- |
| 400 | 100-200 KVA Transformers. |
| 401 | 250-400 KVA Transformers. |
| 402 | Material and labour for replacement of worn out porcelain bushing for 0.433 KV LT side indoor /outdoor transformers with rubberised cork sheet washers all as required at site and complete all as specified and directed suitable for following capacity transformers:- |
| 403 | 100-200 KVA Transformers. |
| 404 | 250-400 KVA Transformers. |
| 405 | Material and labour for replacement of worn out off load tap changer all as per existing sample complete all as specified and directed suitable for following capacity of transformers of any make.:- |
| 406 | 100-200 KVA Transformers. |
| 407 | 250-400 KVA Transformers. |
| 408 | Material and labour for replacement of UNSV oil temperature gauge /thermometer suitable for transformers all as per existing shape and size for any make and model transformers complete all as specified and directed. |
| 409 | Material and labour for replacement of worn out neoprenerubberised cork sheet 4 mm thick for transformer top cover all as required at site and complete all as specified and directed suitable for following capacity transformers:- |
| 410 | 100-200 KVA Transformers. |
| 411 | 250-400 KVA Transformers. |
| 412 | Material and labour for replacement of worn out neoprene rubberised cork washer mm thick suitable for HT/LT side bushing of off sizes all as required at site and complete all as specified and directed |
| 413 | Material and labour for replacement of UNSV silica gelbreather assembly of any description/capacity and supply & fixing new breather assembly transparent body suitable for 11/0.433 KV transformers of capacity upto 100 KVA complete all as specified and directed |
| 414 | All as per item No 135 above but transformer of capacity above 100 KVA but upto 315 KVA –ditto- |
| 415 | All as per item No 135 above but transformer of capacity above 315 KVA but upto 400 KVA –ditto- |
| 416 | Dehydration/centrifuging of transformer oil by means centrifuging machine electrically operated at site of installation of transformer in running condition of transformer including testing of transformer oil before and after centrifuging from top and bottom of transformer at 4mm gap the BDV should be 40KV complete all as specified and directed. |
| 417 | Supply and topping up of transformer oil of dielectric strength of 60 BDV complete all as specified and directed. |
| 418 | Preparation of old surface of transformer for painting externally including fins/radiators removal of all rust/oil/grease and unwanted material and then two coats of synthetic enamel metallic paint by means of spray gun at site of installation of transformer complete, all as specified and directed by Engineer-in-Charge suitable for following capacity of transformers:- |
| 419 | 100-200 KVA Transformers. |
| 420 | 250-400 KVA Transformers. |
| 421 | Material and labour eathing continuity conductor to wall on batten or buried in ground or drawn in conduit or fixed to pole or any other indicated situation for loop earthing etc, as required 20x3 mm dia copper strip complete all as specified and directed. |
| 422 | Material and labour for replacement of unserviceable Silica gel crystel for transformer of best quality, complete all as specified and directed. |
| 423 | Supply and fixing VarPlus logic APFC relay-Advanced Range (Ref:-VPL12N) , LCD Display , 90V - 550V 50/60Hz 1A/5A with RS485,( 144x144mm )Power factor corrector relay 12 Stage all as specified and directed. Make:Siemens/Schneider/ Beluk |
| 424 | Supply and fixing 3 pole power contactor 25 Amp with 2 NO+ 2 NC auxillary contactor all as specified and directed. Make:-ABB / Seimens/ Schneider/L&T. |
| 425 | Supply and fixing 3 pole power contactor 32 Amp with 2 NO+ 2 NC auxillary contactor all as specified and directed. Make:-ABB / Seimens/ Schneider/L&T. |
| 426 | Supply and fixing 3 pole power contactor 40 Amp with 2 NO+ 2 NC auxillary contactor all as specified and directed. Make:-ABB / Seimens/ Schneider/L&T. |
| 427 | Supply and fixing 3 pole power contactor 70 Amp with 2 NO+ 2 NC auxillary contactor all as specified and directed. Make:-ABB / Seimens/ Schneider/L&T. |
| 428 | Supply and fixing MCB 63 Amp. 3 pole ,10 KA, D-Curve all as specified and directed. Make:-L&T / Seimens/ Schneider. |
| 429 | Supply and fixing MCB 40 Amp. 3 pole ,10 KA, D-Curve all as specified and directed. Make:-L&T / Seimens/ Schneider. |
| 430 | Supply and fixing A/M Selector Switch all as specified and directed. Make:-L&T / Seimens/ Schneider. |
| 431 | Supply and fixing ON –OFF Push Button all as specified and directed. Make:-L&T / Seimens/ Schneider. |
| 432 | Supply and fixing Aux. Contactor2 NO + 2 NC all as specified and directed.Make:-L&T / Seimens/ Schneider. |
| 433 | Supply and fixing Indicating Light ON –OFF all as specified and directed. Make:-L&T / Seimens/ Schneider. |
| 434 | Supply and fixing Power Capacitor 25 KVAR having tolerance 0% - 10% with discharge device resistor .Metallised polypropylene filmwith Zn/Al alloy Can typecapacitor bankof rated confirmed to IS mark all as specified and directed. Make EPCOS /ABB/Schneider. |
| 435 | Supply and fixingPower Capacitor 10 KVAR having tolerance 0% - 10% with discharge device resistor .Metallised polypropylene filmwith Zn/Al alloy Can typecapacitor bankof rated confirmed to IS mark all as specified and directed. Make EPCOS /ABB/Schneider. |
| 436 | Supply and fixing Power Capacitor 5 KVAR having tolerance 0% - 10% with discharge device resistor .Metallised polypropylene filmwith Zn/Al alloy Can typecapacitor bankof rated confirmed to IS mark all as specified and directed. Make EPCOS /ABB/Schneider. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
