Miscellaneous Civil Works At Acos Pratapgarh - Building, Sanitary & Water Supply, Electrification - Renewing glass panes, with putty and nails wherever necessary Float glass panes of thickness 4 mm Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish:20mm thick. Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 (1-Cement: 6-Sand). Providing & fixing precast cement concrete coping 124 mix 50mm thick complete as per specification: Earth work in excavation by mechanical means (Hydraulic Excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size). Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 13 (1) cement: 3 coarse sand) and making good the joints and cost of plastizers if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix/Design Mix Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft. bases of columns etc. Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 16 (1 cement: 6 coarse sand) Half brick masonry in Superstructure, above plinth level upto floor V level using bricks of designation 75 Cement mortar 16 (1) cement: 6 coarse sand) Add extra providing and placing in position 2 Nos. 6mm Ø M.S. bar at every third course of half brick masonry. Providing and fabricating reinforcement for R.C.C. work including straightening, cutting. bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to 15:1786) Hot rolled deformed bars (IS: 1139). Providing and fixing M.S. sheet Imm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm. 10cm long embedded in cement concrete block 15x10x10cm. of 1:36 (1cement3 coarse sand 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required: Windows side hung Ventilators top or centre hung (openable) Deduct for Pin headed 4mm thick glass panels is used instead of 4mm thick plain glass Providing and fixing Square bars or other flat welded to window, ventilatiors etc. Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawi plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges: Providing and fixing Ist quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to Is 13753 & IS 15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to 15 13755 and IS: 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a hed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4), Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 13 complete as per specification and instruction of Engineer In Charge Providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron Y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with Gl staples and GI clips to retain horizontal including necessary bolts or Gl barbed wire tied to angle iron all complete as per direction of Engineer In Charge with reinforced barbed tape (R.B.T.)/Spring core(2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (Cost of MS angle, CC block shall be paid extra) P&F galvanized barbed wirings on existing 9/9.33+9.3 angles B 5 Earth work in excavation by mechanical means (Hydraulic excavator / manual means |over areas (exceeding 30cm in depth. 1.Sm in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m, disposed 1/1.6+G4/4learth to be .1.7+4.1.8 levelled and neatly dressed : All| kinds of soil. Including lead upto 3 KM P & F Flush Cock / Flush Valve (IS: 9758 Mark) for WC of approved quality make :Brass / Gun metal Half-turn wt. I Kg. of approved quality / make, 25mm nominal S- P & F Full-way Valve (IS:778 Mark) or wheel 2/233/2.15.]valve of approved make :Gun-metal 15mm nominal bore. 1 S-2/2.15.3 bore. P & F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No), of approved make with cover, 25mm dia IM |long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of S-2/2.26.3 approved design: 500 litres capacity Particulars 3 S-1/1.48.1 dia. S-2/2.2.1 P& F Full-way Valve (IS:778 Mark) or wheel valve of approved make :(-do-) 25mm nominal 2.2.3 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:Brass 400 gm, 1 Smm S-2/2.7.1 nominal bore. S-2/2.1.1 2.1.3 & F Grating of approved quality/make:Stainless Steel Sheet size 125mm P & F G.I. Pipes (External Work) with G.. |fittings excluding union (S : 1239 Mark) including trenching & refilling earth etc. 1 5mm dia nominal bore B Class 25mm dia nominal bore B Class P & F GI. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: l15 mm dia nominal bore B Class l25mm dia nominal bore B Class P& F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin. Gyser etc. C.P. Inlet connection 15mm.Brass (IS S-2/2.12.1 |: 8931 marked) P & F Indian type white glazed vitreous china 1 quality W.C. orissa pan (IS :2556| Mark) with 100 mm vitreous china P or S trap including cutting and making good the S-1/1.2.2 wall and floor: Size 580x440mm. Qty. 4 1.00 1.00 1.00 1.00 1.00 2.00 5.00 5.00 5.00 5.00 2.00 1.00 BSR-2022 Rate Uníte 6 551.00 Each 227.00 Each 3920.00 529.00 Each Each 62.00 Each 298.00 Each 190.00 R.Mtr 278.00 R.Mtr 230.00 R.Mtr 360.00 R.Mtr 501.00 Each 3080.00 Each Amount 7 551.00 227.00 529.00 3920.00 62.00 596.00 950.00 1390.00 1150.00 1800.00 1002.00 3080.00 S-2/2.14.9 bore. 11 12 13 14 Flush Cock / Flush Valve J(IS: 9758 Mark) for WC of approved| quality make : Brass / Gun metal Half-turn wt. I Kg. of approved quality / make, S-2/2.14.9 25mm nominal bore. P & P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining |the pipe with solvent cement rubber ring and S-3/3.17 lubricant: 3.17.2(a) Reducer 110 X 75 mm 1Omm 3.17.3(b) Plain Tee 110 mm 3.17.4© Door Tee 110 mm 3.17.8(d) Bend 45 110 mm 3.17.9(e) Bend 87.5 110 mm 3.17.10(f) Door bend (Top side) 1 10 mm Construction of soakage well in all type of] soil with 300 mm thick dry masonry, top and| |bottom 300 mm course in CM 1:6, 80Omm thick stone slab, jointing of slab in CM 1:3,| Ralthal, Kharanja, 40 mm thick M-15 gradel |C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 240 Cm. S-3/3.22.3 dia outside & 240 Cm. depth. P & F Ist quality WYC Urinal (IS:2556 mark) with 25mm dia G.l. waste pipe, dome waste couplings, concealed iron brackets or |screws etc complete. Flat Back (small) sizel S-1/1.14.1 456x355x265mm. |Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) on surface ISI marked ( IS:14927 P -I) virgin material UPVC trunking & |its accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal/ Surface Moulded virgin material UPVC Modular Box, 10 A Modular switch, Modular |face plate with grid plate, 3 pin ceiling rose/holder /3 way |Connector, screws, making connections, testing etc. as |required. For specification of copper Conductor, Phenolic |Laminated sheets & Electrical/ Wiring accessories refer |Chapter E -04, E -05 & E -07 For additional technical |parameters of product / work refer Annexure A attached with this BSR Short point (up to 3 mtr.) E-03/3.1.2 Medium point (up to 6 mtr.) E-03/3.1.3 Long Point (up to 10 mtr.) |Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexiblecopper earth conductor 1.1 kV grade(lS:694) on surface ISI marked (IS:14927 P -I1 ) virgin material UPVCTrunking & its accessories, HotDipped Galvanized Modular box of 1.2 mm thick withearth terminal/Surface Moulded virgin material UPVC Modular Box, modular 10A switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate,screws, making connections, testing etc. as required. For specificationof copper Conductor, Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E-07 For additional technical parameters of product/ work refer Annexure A attached with this BSR On board Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : |2013 of 1.1 kV grade. Wire should be made from 99.90% purity copper, class 5 stranding in acc. to IS:8130/1EC 60228 for lower watt loss, oxygen free for less chances of oxidization, insulation PVC type A/C/D, flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, E-04/4.1.I |in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules, testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For |additional technical parameters of product/ work refer Annexure A attached with this BSR. 1x 1.5 sq.mm 4.1.2 4.1.6 4.1.11 E-07/7.37 |2 x 1.5 Sq.mm 2 x 2.5 sq.mm |2 x 4.0 sq.mm |Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on |hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with |suitable size of modular face place with grid plate and cover plate including cost of ISl marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection, testing, etc. as required. For specification of Wiring accessories refer Chapter E -07 related item & For additional technical parameters of product / work refer Annexure A attached with this BSR Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheet steel with depth of minimun 30 mm and inished with powder coating and suitable for mounting LED tube including side covers, holders , internal wiring to illuminate the single sided connection LED tube. ( Without E |17/17.11.2|tube). AIl as per pre approved by Engineer in charge. For ladditional technical parameters of products/ work, refer Annexure A attached with this BSR. Suitable for 4 LED Tube shape fixture for single rod Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt |losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. ,conductor line load reversibility, IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL/ CPRI / ERDA accrediated lab type test reports 8& All as per pre approved by Engineer in charge. For additional technical parameters of product/work refer Annexure A attached with this BSR Single pole MCB (With B/C curve tripping Characteristics 6 A to 32 A rating SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, lluminated ON /OFF push buttons, ammeter, voltmeter, indicating lamps etc. 21/21.13.1|suitable for following rating motors complete in all respect. |All as per pre approved by Engineer in charge. For additional technical parameters of products/work, refer Annexure A Jattached with this BSR .For single phase Submersible / Monoblock pump 2.0 HP to 3.0 HP (DOL starter).
