Tender For Pwd Road Work To Haribhaktapur, Khordha-Odisha

Tender For Pwd Road work To Haribhaktapur , 1 Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of grith upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means andstacking of serviceable materials to be used or auctioned upto a lead of 1000m incuding removal and disposal of top organic soil not exceeding 150mm in thickness as per direction of Engineer-in-charge. 2 Costruction of embankment with approved material obtained from borrow pits with all leads & lifts transporting to site by mechanical means with a leads of 5 km spreading grading to required slope & compacting to meet requirement etc complete as directed E.I.C 3 Earth work in excavation of foundation in hard soil with all leads and lift including rough dressing breaking clods and leveling bed and depositing the excavated materials away from the working area etc. complete as directed E.I.C. 4 Filling in shoulder with excavated earth etc. Complete as directed E.I.C 5 Providing granular sub-base by providing close draded granular sub base Grading -III material as per table 400-1 spreading in uniform layers with motor grader on prepared surface , mixing by mix in place method with vibrator at OMCand compacting with vibrator roller to achieve the desired density complete as per clause 401 of MoSRT&H specification of road & bridge works 6 Providing laying spreading & compacting graded stone aggregate to WMM specification incl premixing the material with water at OMC in mech mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface & compacting with vibratory roller to achieve the desired density as per clause 406 of MoSRT &H Specification for Road & bridge works 7 Providing 37.5mm thick BUSG in one layers applying tack coat using 3.0 kg of bitumen /10 sqm, using 0.45 cum of25mm to 40mm size H.G. metal& 0.12 cum of 12mm size h.g. chips for 10 sqm . etc. Complete as directed E.I.C 8 Providing & applying Primer coat over granular surface using emulsionincluding clearing the surface etc. complete for finished item of work induding cost, conveyance, royalty, taxes, labour, T&P, all other matermls required for the work etc. complete as per direction of the Engineer-incharge. 9 Providing and apppying tack coat with bitumen emulsion with pressue distributor (RS) at the rate of 0.20kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom etc complete as per direction of the Engineer-in charge. 10 Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision) 11 Providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete

INR 6000 /-

INR 11760.0 /-

INR 11.76 Lakhs /-