Tender For Expansion And Extension Of Sewer Network To Unserved Area Of Shimla Town Sh Providing And Laying Of 150 Mm Dia Di Sewer Line To Left Out Area Of Benmore And Rajbhawan And Other Adjoining Areas To Stp Lalpani Network, shimla-Himachal Pradesh

Tender For Expansion And Extension Of Sewer Network To Unserved Area Of Shimla Town Sh Providing And Laying Of 150 Mm Dia Di Sewer Line To Left Out Area Of Benmore And Rajbhawan And Other Adjoining Areas To Stp Lalpani Network - 1 Demolition below G.L. 1.50 Meters depth and disposal of unserviceable materials within 20 meters lead. Un-reinforced cement conrete upto 15 cm thickness. 2 Excavation in earth work and disposal of all excavated earth up to all leads and lifts, disposed earth to be levelled neatlydressed as per direction and to the entire satisfaction of the Engineer-in-Charge 3 Providing, layingjointing & testingin trenches centrifugal cast ductile iron (spun) pressure pipes as perIS:8329/2000 Class K-7 duly ISI marked, inside cement mortar lined suitable for tyton (push on joints) for sewer lines including cutting of pipes, chamfering where required (earth work in trenches and jointing of pipes to be measured and paid for separately) including carriage up to the site of work, testing etc., complete as per instructions of the Engineer-in-charge 4 150 mm 5 Providing& fixing in trenches centrifugal cast ductile iron fittings of 9523/2000 class A,series K-12with inside cement mortar lined suitable for tyton (push on joints)with sewers, such as socketed bends of all degrees, socketed, tees, collars and all other required fittings, including carriage up to the site of work, testing etc., complete as per instructions of the Engineer-in-charge. (earth work in trenches and jointing offittings to be measured and paid for separately) 6 150 mm dia double socket DI Bend of require degree 7 90 degree 8 45 degree 9 22.50 degree 10 11.25 degree 11 providing and fixing DI Tee 150mm x 150 mm x 100mm 12 providing and fixing DI Tee 150mm x 150 mm x 150mm 13 providing fixing MJ Collar 150mm 14 Providing tyton (Push on joints) to Ductile iron pipes and fittings including the testing of the joints cost of rubber gasket (SBR quality) conforming to IS 12820/1989 15 150 mm. dia 16 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) 17 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost ofentering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) complete as direction of er-in-charge 18 Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to givea fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:- Foundation ,footings basis of columns etc and mass concrete complete as direction of er-in-charge. 19 Providing fixining of SFRC frame cover manufacture as per BIS:12592 (Part 1 &2) for Manhole of load capacity of 20 MT having diameter 560 mm complete installation as per direction of er-in-charge.(Form3 Nos of manhole) 20 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost ofentering, shuttering, finishing and reinforcement,1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete as direction iof er-in-charge. (For Slab) 21 Providing mild steel/tor steel reinforcement for RCC work includng bending binding and placing in position complete upto level @110kg/m^3 as per the direction of er in charge. 22 Stone soling property hand packed for the restoration ofdamaged public path. 23 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.

INR 5000 /-

INR 182200.0 /-

INR 1.49 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB