Tender For Upgradation Of Indoor/Outdoor Stadium And Sports Facilities At Bundelkhand University Jhansi (U.P) - 1 Upgradation of Indoor/Outdoor Stadium and Sports Facilities at Bundelkhand University Jhansi (U.P) 2 RUNNING TRACK 3 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. [DSR 16.1] 4 Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. (DSR-4.1.8) 5 First Class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortar in foundation and plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. (1:6 cement & coarse sand). M-150 Class Brick work. 6 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) F.M. 2.25. 7 25mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement.DSR-11.3.1 8 Construction of granular sub-base by providing close graded Materialconforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30,(DSR-16.78.1) 9 Supplying & Laying, spreading and compacting Red bajri of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . (DSR 16.3.8+16.4) 10 Filling of carted earth. 11 Modular Grating for Drain made on White ABS (UV Stabilised) suitable for Reversible curves also. Individual Units Slotted Togather to Form A continous Run. Grating Width 350-400 mm (MR) 12 Providing & Laying 150mm dia PVC pipe 6 Kg pressure (For drainage of water of drain from running track/ inside area of track toward outside of track. 13 Line Marking 14 VISITOR PAVILION 15 Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. 16 Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 stone ballast 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. 17 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 18 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) 19 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 20 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 21 Class M-150 brick work in 1:4 cement coarse sandmortar insuperstructure including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 22 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarsesand. 23 Earth filling. 24 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 25 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 26 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 27 Providing and applying white cement based putty of average thickness 1 mm, of approved brand &anufacturer, over the plastered wall surface to prepare the surface even & smooth complete. 28 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 29 Centering and shuttering including strutting, propping etc. and removal of form for (a) Foundations, footings, bases of columns, etc. for mass concrete 30 (b) Columns, Pillars, Piers, Abutments, Posts and Struts 31 (b) Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick 32 REPAIR WORK OF INDOOR STADIUM 33 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) 34 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 35 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 36 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 37 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm & size 24x25 mm made of 0.30 mm thick (min.) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm & wall angle of size 24x24x0.3 mm & laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 38 Providing and fixing aluminium work for doors, windows, ventilators and partitions witth extruded built up standard tubular sections/appropriate z sections and other sections of approved make conforming to IS 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctins, i.e. att top, bottom and sides with required. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 39 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architecttural drawings and the directins of engineer-in-charge (Cost of aluminium snap beadingg shall be paid in basic item). With float glass panes of 8 mm thicness 40 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 41 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 42 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. 43 STAGE LIGHTING SYSTEM 44 Supply Installation, Testing and Commissioning of Profiles Light,Profile spot for sharp focusing, Four edge with Iris shutter. Black finish Color, Model : PH 2550 Make : A K Electrical 45 Supply Installation, Testing and Commissioning of Par 64 Lights ,Powerful Light for Stage, 1000 watt Power,With wide medium and Narrow Beam, Matt Black or Chrome Finish Light.,Length 43 cms. Width 28 cms. Height 25 cms.Model : PAR 64 Make : Sai Stage Products 46 Supply Installation, Testing and Commissioning of Fresnel Lights, Soft edge Spot Light for Stage, Fresnel Lens 150 mm., with GX 9.5 Base for T-11 type Lamps and Barndoor. Black finish Color,Length 34 cms. Width 30 cms. Height 31 cms. Model : FT-1001, Make : Sai Stage Products 47 Supply, Installation, Testing and Commissioning of PC Light, A Multi Purpose Light., Single Lens 145 mm condenser.with GX 9.5 Base for T-11 type Lamps. Black finish Colour,Length 40 cms. Width 30 cms. Height 35 cms. Weight 9 Kgs.approx, Model : PT1001, Make : Sai Stage Products 48 Supply, Installation, Testing and Commissioning of Halogen Light, Stage Filler Light,with1000 watt Halogen lamp, Model : 100-H, Make : Sai Stage Products 49 Supply, Installation, Testing and Commissioning of Halogen Cyclorama Light,1000 Watt halogen Cyclorama Light,Used to light up background, Matt Black Finish.Length 25 cms. Width 35 cms. Height 32 cms. Weight 4.5 Kgs Model : CFH-100, Make : Sai Stage Products 50 Supply, Installation, Testing and Commissioning of Dimmer Board, 12x4 KW, Wall mount with 12x4 way Patch Panel built in, Model : DMW 2012, Make : Sai Stage Products 51 Supply, Installation, Testing and Commissioning of Light Mixer Controller, Model : LSCMake : Maxim 52 Supply, Installation, Testing and Commissioning of 50mm dia MS Bar for Lights 45 ft. long 53 Supply, Installation, Testing and Commissioning of Side Ladders 6x2 of MS Tube 2x1 for lights between wings 54 Supply, Installation, Testing and Commissioning of C Clamps for 50mm MS Pipe 55 Supply, Installation, Testing and Commissioning of Safety chains for Lights 56 Supply, Installation, Testing and Commissioning of Power wire1.5 sq.mm, 3 core cable in PVC conduit to be done at site with sockets & tops for lights 57 SOUND SYSTEM 58 BoschElectrovoice Speaker 400watt 2 waypassive 60 degree x 40 degree. Nominal impedance 8Ohmswithbuilt in crossover 99 dBsensitivity , 131 dB maxSPL, angledinputpanel Maxwattage 1600 watt Peak Model G115 59 Bosch Electro Voice350 watt cont. / 1400 watt P 18 sub woofer complete withback bonegrill having 100 dB sensitivity, 131.5 dB SPL with extremely lowdistortion with high sensitivity, rextangularenclosure omnidirectional rearmountedcasterswith luggagestyle handle Model Force I sub 60 Electro Voice 2wayfullrange 200 Watt Speaker Driver protectedcircuit, Trapezoidalshape, Freqresponse : 60to20000 Hz MaxSPL 121 dB, Longtermpowerhandling200 Watts , LFtransducer 8”, throatdiameter 1.25”andnominal impedance 8 Ohms equippedwithfourpindetachable speakonconnectors Model SL 8.2 61 Bosch Electro VoiceAmplifierwithdynamic capability having ultralowhum&noisewithdistortion< 0.05%.2 x 800 watt powerat 4 Ohms& 2 x 1400 watts at 2 Ohms.Freq 10 to 40000 Hz Slewrate 27 V/ micro sec, inputbalanced impedance 20 K Ohms S/Nratio > 109 dB Model Q99 62 BoschDynacord heavy duty high performance Amplifier 2 channel Distortion < 1%, Maxpower 2 x 450 Watts at 4 Ohms, Slewrate 28 V/micro sec, crosstalk < -75 dB, Freqresponse10 to 40000 Hz Balancedinputimpedance 20 K Ohms. S/N Ratio 104 dB. Model PCL 1245 63 Bosch Electro Voice Digital signal processor having 2 in 6 outfor loudspeakermanagement optimisation Model DC-One 64 Boschdigitalfeedbacksuppressorcumaudioprocessor workingon24bitAlgothermsoftware 65 BoschDeskstandpremiumgooseneckmike undirectional condensor, ON/ Off slidingswitch, sensitivity 25mVolts/pascal Freq 100 to 16000 Hz, output impedance< 200 Ohms distortion < 0.6 % currentconsumption <8 mA 66 Boschdynamichandheldmikeunidirectionalsenstive forspeech&conferenceLBC 2900 67 Bosch EV makeHandheldwiredcardiodemicrophoneforgeneralapplicationshaving freq response 50 to 18000 Hz Open Circuit voltage 2.8 mv / Pascal, bodyof Die cast Zinc cobaltfinish with 600 ohmsimpedance Co 5 68 Micro VHFCordless handheldmicrophonewithprogrammablefacility formorethan1000frequencies in25 KHzsteps & operates in 24 MHz band width in the UHF portion, Backlit LCD display, 1 touch auto clear scan, Freq 50 -15000 HZ, PLL Synthesized 69 16channelmixerwithbassandtrebleinallchannelswithphantompoweronallchannelshaving3 bandgraphicequalizerandcompletewith6 compressors, HPF, high qualitymikepre amp, illuminatedchannel ON switches 10 mikeinputs, 4 stereo, 2 Aux send, 1 effect send, 6 buses & 12 seg Led indicatorYamaha 70 Standfloorfor Microphone GS 71 Floor standfoldableHalf GS 72 Tablestand GS 73 Wiringwith 2core shieldedmicrophone cable in pre laid pipes 74 Wiringwith2core 2.5 mm copper multistrand speaker cable 75 Makingofmike /Input pointsBoxes onstage with connector 76 Equipment Rack - 32 U 77 Earth Work in Laveling, Dressing, Making huts, Making Approch road for Material and other Contengency Work in favour of R&P UPGRADATION OF INDOOR / OUTDOOR STADIUM & SPORTS FACILITIES AT BUNDELKHNAD UNIVERSITY,DISTRICT :-JHANSI (U.P.)by Direction of Enginear in charge. All work should be done including labour & Material Costin. and also Payment done after making PCR & Other Official Paper work. 78 GST Extra as per applicable
