Tender For Augmentation And Extension Of Nagar Palika Parishad Sitapur Water Supply Scheme Under Amrut 2.0 Distt Sitapur Construction Of Over Head Tanks Pump House Cwr Boundary Walls House Connection Repairing Of Existing Oht Rising Main Tube Well Works Scada Etc Complete- Construction of Over Head Tank, Rising Main, CWR, Tube well, Pump House,Boundary wall, Distribution System, house Connection, and Approach road etc. for AUGMENTATION & EXTENSION OF NAGAR PALIKA PARISHAD SITAPUR WATER SUPPLY SCHEME, DIST- SITAPUR (UNDER AMRUT 2.0). Sl. No. Item Description 1 CONSTRUCTION OF OHT 2 Supply all materials, labours and t&p etc. required at the site of work and construct R.C.C. over head tank abovementioned capacity and staging staging including the cost of construction of following appurtenant works. 3 2 Column Stair Case 4 1m wide R.C.C. stair case from ground upto the balcony ofthe tank 5 Lightening conductor as per Indian electricity rules. 6 Water level indicator as per deptt. specification 7 20 mm. S.S. pipe (light quality) railing with 50 x 50 x 6 mm. 1.2 m. high angle iron posts1.5 m. c/c on both sides of the stair case (pipe in 3 rows) and balcony (pipe in 3 rows) 8 50cm. wide M.S. ladder with 50x50x6 angle iron and 20 mm. rungs at 25 cm. c/c/, from balcony to the top dome of the tank and from there to the bottom dome of the tank inside it. 9 60x60 cm. M.S. manhole cover (light pattern)with locking device. 10 Supply, erection, fixing in position and jointing of following D.I.D/F pipes with sluice valves and specials 11 ISI marked D.I.D/F pipes, class A as per IS-1537/1960 12 Outlet - 350 mm - 22m 13 Outlet - 350 mm - 22m 14 Over flow - 350 mm - 25m 15 Washout - 100 mm - 22m 16 ISI marked C.I.D/F sluice valves as per IS- 780/1969 17 Outlet -350 mm 18 Washout - 100 mm - 1 No 19 ISI marked d.I.D/F specialsas per IS 1538 20 Clamping the vertical pipes with columns by clamps of 50 x 6mm. M.S. flat 1.5m c/c/ including the cost of all jointing materials such as nut bolts and washers etc. 21 Weather coat painting on outer surfaces of R.C.C. work with ISI marked cement paint in 3 coats. 22 Painting of M.S. ladder, railing and vertical pipes with ISI marked enamel paint in 3 coats. 23 Floor and apron at the ground level upto 15cm. beyond the entire projected area of the O.H.T. with 25mm. 1:2:4 P.C.C. over 75 mm., R.C.C. 1:1.5:3 (minimum steel to be provided) as per deptt. specifications. 24 Sluice valve chambers - 2 Nos. (As per type design) 25 Testing of tank for water tightness etc. for propoer completion of the work. 26 Site. clearance 27 Zone-4A (1400 KL /18M) 28 Zone-5A (500 KL /20M) 29 Provision for soil investigation 30 Rising Main 31 Supply, Carting, Laying & Jointing of ISI marked S&SCentrifugally Cast (Spun) DuctileIron pipesas per IS : 8329-2000 suitable for Push on jointing by compatible rubber gasket confirming to IS : 9523 : 1980 at divisional store including all taxes 32 200 mm dia 33 Supply, Carting, Laying & jointing of following size screwed down type C.I. single ball air valves. 34 50 mm dia 35 Supply, Caritng & fixing of the following dia DI butterfly/sluicevalves,classI,workingpressure10Kg/cm2 confirming to IS: 780/1969 or its latest amendments, includingvalve fittings & Dismantling Joints as per requirement F.O.R. destination, and lowering them into the already prepared trenches, complete and also including supply of jointing materials etc. complete .including all taxes and insurance, as per instructions of Engineer -in -charge. 36 Sluice valve 37 200 mm dia 38 Supply of all materials, labour T&P etc. and construction of air valve chamber complete required for proper completion of the work as per type design(with RCC cover) 39 Supply of all materials, labour, T&P etc. and construction of sluice valve/scour valve chamber as per type design. 40 Provision of construction of RCC thrust block of grade M-20 for water hammer at bends of pipe. 41 Supply of reinforcement including cutting bending etc complete for surface reinforcement. 42 Provision for crossing of nala, road, culvert excluding supply of C.I. tyton pipe/MS pipe and specials, but including their laying, jointing etc. complete. 43 More than 1.0M (Avrage rate more than 1 meter) 44 Less Than 1.0M (Avrage rate more than 1 meter) 45 Distribution System 46 Supply, Carting, Laying & Jointing of following sizes HDPE Pipe PN-6: Class PE-100 for distribution system conforming to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest / relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading unloading but excluding the cost of trenches all complete as per instructions of Engineer -in - charge. Rate is inclusive of supply of HDPE electrofussion speicals. 47 90 mm dia HDPE Pipe PN-6, PE:100 48 110 mm dia HDPE Pipe PN-6, PE:100 49 140 mm dia HDPE Pipe PN-6, PE:100 50 160 mm dia HDPE Pipe PN-6, PE:100 51 Supply, Carting Laying & jointing of following sizes (D.I.) pipes for rising main/distribution system conforming to latest/relevant I.S. 8329/2000 Specifications with all jointing materials such as specials conforming to latest/relevant I.S. specifications suitable for D.I pipes as per IS-1239 /2000 and IS 8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading unloadingbut excluding the cost of trenches. All complete as per instructions of Engineer -in - charge. Rate is inclusive of supply of DI Pipe speicals. 52 200 mm dia DI Pipe K-7 53 250 mm dia DI Pipe K-7 54 300 mm dia DI Pipe K-7 55 350 mm dia DI Pipe K-7 56 400 mm dia DI Pipe K-7 57 500 mm dia DI Pipe K-7 58 Supply, Caritng & Fixing of the following dia DI butterfly/sluicevalves,classI,workingpressure10Kg/cm2 confirming to IS: 780/1969 or its latest amendments, includingvalve fittings & Dismantling Joints as per requirement F.O.R. destination, and lowering them into the already prepared trenches, complete and also including supply of jointing materials etc. complete .including all taxes and insurance, as per instructions of Engineer -in -charge. 59 Sluice valve 60 80 mm dia 61 100 mm dia 62 150 mm dia 63 200 mm dia 64 250 mm dia 65 300 mm dia 66 350 mm dia 67 400 mm dia 68 500 mm dia 69 80 mm dia (Scoure valve) 70 Supply, Carting & Fixing ofsingle / double ball type air valve conforming to latest/relevent I.S. specifications including all taxes and insurance, complete (including supply of jointing materials and Valve fittings etc complete) as per instructions of Engineer. 71 50 mm 72 Supply of under ground sluice value type fire hydrant consisting of 80 mm dia sluice valve, 80mm dia tail pieces, 80mm dia duck foot bend and 80 mm dia standard makes iron coupling with cap and etc. complete conforming to latest/relevent I.S. specifications including all taxes and insurance up to site of work (including supply of jointing materials and Valve fittings etc. complete as per instructions of Engineer ‐in ‐ charge. 73 Excavation of earth in ordinary soil (loam clay or sand) for pipe line and rising main trenches including lift upto 1.50 m and lead upto 50 m and refilling watering ramming of the excavated earth into the trench and also disposal of surplus earth upto 50m from the center of the trenches including supply of all material labour T&P etc complete as per instructions of Engineer -in -charge. (OD+600)mm 74 In ordinary soil 75 Carting from store to site of works(upto 8Km. or within municipal limit which is more) of 80mm dia size flanged fire hydrant to site of work, fixing them in position for flanged joints . 76 Supply of all materials, labour, T&P etc. and construction of sluice valve/scour valve chamber as per type design. 77 Surface box type including supply and fixing of 150mm x 150 mm size surface box. (upto 125 mm dia valve) 78 Masonry type with RCC cover (more than 150 mm dia valve) 79 Supply of all materials, labour T&P etc. and construction of air valve chamber complete required for proper completion of the work as per type design(with RCC cover) 80 Supply of all materials, labour, T&P etc. and construction of fire hydrant chamber complete required for proper completion of the work as per type design(with RCC cover) 81 Design and construct Thrust Block made in R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3,forpipeline,includingsupplyofMS reinforcement wrought to required shape as necessary ,its bending, fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work and as per specifications for RCC work as per instructions of Engineer -in -charge. 82 Providing reinforcement of Thrust block for reinforced concrete work including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with wire at every inter-section, complete as per drawing and direction. 83 Making Nala crossing falling on alignment of pipe line including cost of D.I. pipe one no. (5.50m length) including supply of all materials, labour, T&P, etc complete required for proper completion of work. 84 width 0.3 m to 0.5 m 85 width 0.5 m to 1.0 m 86 width 1.0 m to 1.5 m 87 width 1.5 m to 3.0 m 88 Dismantling of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m. and also including temporary reinstatement of road by old materials. 89 Bituminous Road as per NP specs 90 Bituminous Road as per PWD specs 91 Brick Road (BOE) 92 CC Road 93 Inter locking tile Road 94 Permanent reinstatement of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m. 95 Bituminous Road as per NP specs 96 Bituminous Road as per PWD specs 97 Brick Road (BOE) 98 CC Road 99 Inter locking tile Road 100 Road Crossing - Excavation in foundation of trench of proper size in soil mixed with moorum, Shingle, Kankar, soft rock, hard rock, including refilling, dressing and ramming earth or sand or bajri, ballast, including providing, supply, carting, lowering, laying and jointing of casing pipe of RCC NP-3 with appropriate size, with rubber ring joint, sand filling in gap insidepipe, insertion of distribution pipe into the encasing pipe including supply of T&P, including concrete of 150 mm thick in with 40mm gauge brick ballast local sand and cement in proportion of 8:4:1, provision for barricading, labour for traffic diversion etc. Complete for proper completion of work as per instruction of Engineer. 101 100 mm dia. Pipe 102 150 mm dia. Pipe 103 200 mm dia. Pipe 104 250 mm dia. Pipe 105 300 mm dia. Pipe 106 400 mm dia. Pipe 107 Providing ISI mark, G.I. Pipe, Carting, laying & Jointing of following class and dia excluding GST levied by GOI & GOU in all respect, inspection charges, transportation to stores, etc. complete as per IS- 1239/2004. Note:- One coupler shall be provided with each full length of pipe cost of which is included in rates below. 108 Medium Class 109 80 mm (8.64 kg/m) 110 100 mm. (12.40 Kg./m) 111 150 mm. (19.70Kg./m) 112 Shifting of Existing Services of existing services like electric pole, telephone pole, gas pipe line, water line, house connections repair, and repair of septic tanks, which are constructed on road etc during the execution of work as per requirement 113 House Connection 114 Making House connection in nominal dia. New/Existing distribution mains with fixing of saddle piece, service connections, fittings, and fixing of G.M. Ferrule of 15 mm size inculding tapping the main etc complete in all respect as directed by Engineer-in-charge. 115 90mm to 110 mm Dia 116 140mm to 160 mm Dia 117 200mm to 250 mm Dia 118 300 mm to above Dia 119 CWR 120 Construction of Clear Water Reservoir (CWR) with pump house and chloronome of following Capacity includingsupply of structural drawing and design,supply of all materials, labour and T&P etc complete as per detailed design and drawing supplied by the contractor and approved by the compitent authority with construction of screen channel and fabrication and installation of screens. 121 400 KL 122 PUMP HOUSE CUM CHLORONOME 123 Construction of Pump House- Cum-Chloronome with bypass chamber of size 3.60 x 3.0 M x 3.6 & 1.80 x 1.20 x 3.0 M including supply of all materials, labour, T&P etc. required for proper completion of work as per departmental type design. 124 BOUNDRY WALLAROUND WATERWORKS CAMPUS, GATE, SITE DEVELOPMENTAND APPROACH ROAD,MCS ROOM 125 Supply of all materials, labour T&P etc. for construction of boundary wall as per departmental type design at water works required for proper completion of work. 126 Supply and fixing of 3.60 m wide main gate & 1.20 m wide wicket gate including construction of pillars as per departmental type design including supply of all materials, labour, T&P etc. required for proper completion of works. 127 Provide all meterial, labour, T&P etc. required for proper completion of work including leveling, dressing for development of water works site. 128 Filling of carted earth in water works campus. 129 Supply of all materials, labour T&P etc. and construct Interlocking road in water works compound. 130 Construction of 300x300 mm size drain 131 Construction of Artificial Recharging of Ground water hrough roof top rain water of pump house, bypass chamber’s water & overflow of O.H.T. supplying of all material, pipes, grates, etc. complete in all respect. (Unit Estimate Attached) 132 INTERCONNECTION WORK OF NEW PIPE TO EXISTING PIPE 133 Providing and Laying of different dia pipe interconnection work of New pipe to Existing pipeline. 134 90mm to 110 mm dia HDPE Pipe 135 140 mm dia HDPE Pipe 136 160 mm dia HDPE Pipe 137 200 mm dia HDPE Pipe 138 250 mm dia DI Pipe 139 300 mm dia DI Pipe 140 350 mm dia DI Pipe 141 400 mm dia DI Pipe 142 Unforseen items for completion of Work. 143 RENOVATION WORKS FOR EXISTING OVER HEAD TANK (1400 KL 20 M Staging) 144 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after . The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: -This item to be used for maintenance work judicially , necessary deduction for scaffolding in the existing item to be done. 145 Surface Preparation:- Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 146 25mm average thickness 147 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry , all complete as per direction of Engineer-In-Charge. Bars above 12 mm dia 148 Provision of following works-Provison for the surface of structure to be treated for strengthening to be roughened properly either by raking joints or by hacking the cement concrete surface with a specially made hacking tool or other wise alternatively to make the surface rough and dust free byproviding spatter key or wire brush. 149 Injection grouting in vertical surface/wall Placing and fixing nozzle by drilling machine in tank wall having minimum dia of Nozzle 15mm and provided on a regular interval not exceeding 1mincluding construction joints.Injection of pidicrete AM (polymer based on shrinkage high strength grout) admixed with cement through nozzles under pressure by sump @ 250 gmsper bag of cement. Sealing the nozzle after grouting with Polymer product mixed with cement. 150 Repairing of spalled and lose concrete where reinforcement is exposed apply like fixit rust remover by means of brush to the reinforcement for clearing bars and steel surface then apply a bonding coat of acreylic based polymer with cement slurry in 1:1 ratio to the pre-wet cencrete by brush. Now apply the mixture of 1:1 cement, coarse sand to the prepared substrate when primer becomes tacky. of 50 mm thick M25 grade.(Taking 20% of total surface area of OHT) 151 Change of S.S. ladder inside the tank, repair of M.H. cover of top dome, change of masquoto jali with new one complete. 152 Supply and fixing of 20 mm diaG.I. pipe railling in stair case and balcony.Taking only 50% new and 50% old materials) 153 Supply and fitting of lighting conductor on top dome and making earthing with required earthing wire from top to bottom of tank as per direction of engineer in charge. 154 100 mm thick 1:4:8 plain cement concrete and 100 mm thick RCC M15 flooring with apron with 3mm floating coat of neat cementincluding supply of all materials, labour, T&P etc complete. 155 Painting of outer surface of OHT from Top to bottom with weather proof paint (like apex etc.) as per direction of engineer incharge. 156 RCC work with cement, coarse sand and 20mm gauge approved stone ballast in proportion of 1:1.5:3 in slabs excluding supply of reinforcement and fixing and binding the same with 0.50mm thick binding wire (to be supplied by the contractor) centering and supply of all materials, labour, T&P etc. required for proper completion of the work. 157 Mild steel or iron work in plain work such as R.C. or R.B. work (When not included, in over all rates) brought to required shape, as necessary including binding for proper completion of work including supply of steel and wastage. 158 1st class brick work in 1:4 cement and Coarse sand mortar in damaged portion of boundary wall including supply of all materials labour, T&P etc. required for proper completion of the work. 159 12mm thick plaster with cement mortar consisting cement coarse sand in ratio 1:4 work minimum thickness not to be less than 10mm on boundary wall including supply of all materials, labour T&P etc. required work. 160 Painting on boundary wall with one priming coat and one coat of approved exterior paint like Apex including supply of all labour, material T&P etc. required for proper completion of work. 161 Painting on iron work in small areas with one coat priming and one coat of approved paint including supply of all materials, labour and T&P etc. required for proper completion of the work. 162 Dismantling of reinforce Cement concrete or reinforce brick work including sorthing and stacking of serviceable of disposal of unserviceable material within a distance of 50m. 163 Removal of silt and dismantle concrete debris deposited inside the container portion and its desposal, washing, disinfecting & cleaning etc. complete. 164 Supply of all material,labour, T&P etc. for fixing of additional vertical pipe for existing OHT of 20 m staging 165 DISMANTLING OF EXISTING OVER HEAD TANK (1400 KL 18 M Staging) 166 Dismantling ofESRs ofvariouscapacities and heights using crane (10 MT capacity) and handing overM.S./ C.I./G.I. pipes, valves, bends,etc.to theDepartment.However takingsteelreinforcementby the dismantling agencyincluding removing dismantled materialsfrom siteanddisposingthemat suitable place as directed, etc. complete. (Capacity of OHT about 1400Kl/18M 167 Electrical And Mechanical Work 168 Zone 1 169 Construction of Tubewell: 170 Drilling of Borehole for Tubewell construction by RC/DC Rig Machine including transportation, erection, dismantling of Rig and assosiated T&P complete in all respect including requried all material, labour etc. 171 Transportation, Erection, Dismantling of Rig Machine 172 Drilling of 600 mm. dia bore from G.L. to 60 m 173 Drilling of 500 mm. dia bore from 61 M to 100 m 174 Drilling of 500 mm. dia. Bore from 101 M to 200 M 175 Logging of bore hole by departmental/Approved electric logger 176 Zone Testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect 177 Tubewell assembly : 178 M.S. tubewell assembly with all required parts like plain, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. As per IS- 4270 179 300 MMØ Housing Pipe 7.1 mm thick 180 200 MMØ Plain Pipe 7.1 mm thick 181 200 MMØ Slotted Pipe 7.1 mm thick 182 Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. 183 300 mm. dia. Housing Pipe from G.L to 54 M BGL 184 200 mm. dia Plain/Slotted Pipe 54 M. BGL to 100 M BGL 185 200 mm. dia Plain/Slotted Pipe 101 M. BGL to 200 M. BGL 186 Pea Gravel (lalkuan) 187 Transportation, Installation Dismantling of 350 PSI Compressor 188 Charges for Development by 350 PSI Compressor per hour 189 Transportation, Erection Dismantling of 3 Cusec OP Unit and Yield test. 190 Charges for Development of TW by 3 Cusec OP Unit 191 Chemical and Bacteriological Test of water sample from departmental/ approved Lab. 192 Watch & Ward during construction period. 193 Barricading around the pit to prevent any posible Accident 194 Pumping Plants for above tubewells at zone 1 195 SITC of 1200 LPM, 30 M head (both tentative) for zone 1 tubewells Pumping plant consisting of control panel having soft starter (item as mentioned below) alongwith by pass star delta Starter, capacitor bank, breakers , cable, complete in all respect with all required material T&P labour etc. SITC of Main Piping (150mm,7.1mm thickness) & reflux valves with 24 mtr. Column pipe, Power wiring, earthing, painting, Tools sets, wiring of pump house (internal & External) Chain Pulley block and gauges complete in all respect with all required material , T&P labour 196 Supply of SCADA Compatible chlorination system 197 Spare Column Pipe 3 M Long heavy Duty 198 SITC of servo Stabilizer 15 KVA (110-300V)/(240V-500V) or suitable capacity 199 Sluice valves with motor operated actuator of size 150 mm or suitable size for rising main & bypass line 200 CE/UL Certified electromagnetic flowmeter of size 150mmor suitable size 201 Soft starter 15 HP or suitable capacity 202 CE/UL Certified hydrostatic type sub soil watel level transmitter for T/W 203 CE/UL Certified Pressure transmitter 204 Complete cabling of tubewell including all power & control cable for T/W 205 Automation of Units of T/W 206 CE & UL Certified RTU/PLC in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & power supply with analog & digital parameters & features as specified for T/W to store and transmit data on GSM Backbone.RTU/PLC designed with logic to transfer data at multiple stations as specified in tender documents 207 GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender documents and all running expenses till DLP 208 CE/UL Certified Intelligent energy meters 209 Auto phase reversal Unit 100 Amp or suitable size 210 CE/UL Certified Surge Protector for control panel 211 CE/UL Certified 7 HMl touch screen suitable to communicate with PLC/RTU for Local display and control of Process Parameters 212 Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 Vand power equipments 213 Security Survelliance IP Camera 214 Installation,Testing and commissioning 215 Trial run 3 months 216 Trial and run of each tubewell for 3 months including chlorination and operating staff excluding electricity 217 Zone 2A 218 Construction of Tubewell: 219 Drilling of Borehole for Tubewell construction by RC/DC Rig Machine including transportation, erection, dismantling of Rig and assosiated T&P complete in all respect including requried all material, labour etc. 220 Transportation, Erection, Dismantling of Rig Machine 221 Drilling of 600 mm. dia bore from G.L. to 60 m 222 Drilling of 500 mm. dia bore from 61 M to 100 m 223 Drilling of 500 mm. dia. Bore from 101 M to 200 M 224 Logging of bore hole by departmental/Approved electric logger 225 Zone Testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect 226 Tubewell assembly : 227 M.S. tubewell assembly with all required parts like plain, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. As per IS- 4270 228 300 MMØ Housing Pipe 7.1 mm thick 229 200 MMØ Plain Pipe 7.1 mm thick 230 200 MMØ Slotted Pipe 7.1 mm thick 231 Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. 232 300 mm. dia. Housing Pipe from G.L to 54 M BGL 233 200 mm. dia Plain/Slotted Pipe 54 M. BGL to 100 M BGL 234 200 mm. dia Plain/Slotted Pipe 101 M. BGL to 200 M. BGL 235 Pea Gravel (lalkuan) 236 Transportation, Installation Dismantling of 350 PSI Compressor 237 Charges for Development by 350 PSI Compressor per hour 238 Transportation, Erection Dismantling of 3 Cusec OP Unit and Yield test. 239 Charges for Development of TW by 3 Cusec OP Unit 240 Chemical and Bacteriological Test of water sample from departmental/ approved Lab. 241 Watch & Ward during construction period. 242 Barricading around the pit to prevent any posible Accident 243 Pumping Plants for above tubewells at zone 2A 244 SITC of 1200 LPM, 30 M head (both tentative) for zone 2 tubewells Pumping plant consisting of control panel having soft starter (item as mentioned below) alongwith by pass star delta Starter, capacitor bank, breakers , cable, complete in all respect with all required material T&P labour etc. SITC of Main Piping (150mm,7.1mm thickness) & reflux valves with 24 mtr. Column pipe, Power wiring, earthing, painting, Tools sets, wiring of pump house (internal & External) Chain Pulley block and gauges complete in all respect with all required material , T&P labour 245 Spare Column Pipe 3 M Long heavy Duty 246 SITC of servo Stabilizer 15 KVA (110-300V)/(240V-500V) or suitable capacity 247 Sluice valves with motor operated actuator of size 150 mm or suitable size for rising main & bypass line 248 CE/UL Certified electromagnetic flowmeter of size 150mmor suitable size 249 Soft starter 15 HP or suitable capacity 250 CE/UL Certified hydrostatic type sub soil watel level transmitter for T/W 251 CE/UL Certified Pressure transmitter 252 Complete cabling of tubewell including all power & control cable for T/W 253 Automation of Units of T/W 254 CE & UL Certified RTU/PLC in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & power supply with analog & digital parameters & features as specified for T/W to store and transmit data on GSM Backbone.RTU/PLC designed with logic to transfer data at multiple stations as specified in tender documents 255 GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender documents and all running expenses till DLP 256 CE/UL Certified Intelligent energy meters 257 Auto phase reversal Unit 100 Amp or suitable size 258 CE/UL Certified Surge Protector for control panel 259 CE/UL Certified 7 HMl touch screen suitable to communicate with PLC/RTU for Local display and control of Process Parameters 260 Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 Vand power equipments 261 Security Survelliance IP Camera 262 Installation,Testing and commissioning 263 Trial run 3 months 264 Trial and run of each tubewell for 3 months including chlorination and operating staff excluding electricity 265 Zonal Pumping station at Zone 2A 266 Pumping plants 267 Supply,installation ,testing and commissioning of VerticalTurbine water lubricated pump and appurtenant / related accessories ,etc complete.to lift 2100 LPM at 36 M head (both are tentative) etc. completewith Vertical Flange Mounted Solid Shaft Motor, 1475 RPM , LT Type of motor with arrangement suitable to operate on 415 volt, 3 Phase 50 HZ AC supply with IP Rating 55.(2W+1S) 268 M.S. fabricated Dust & Vermin proof of cubical type control panel to be operated from SCADA. For Light, fan & Spares including Ampere meter, Volt meter, frequency meter, P.F. meter capacitor, single phasing preventer, Selector switch, fuses, APFC etc. (Seperate incomer for each transformer and dg sets, seperate outgoing for each Pumpsets and 2 nos outgoing for misc use of 63 amp, 32 Amp. & 16 Amp. MCCB and 1 No. SPAREMCCB. of similar rating as outgoing of pumpset) Note- All incomers and outgoing panels for pumpsets shall have Multi function meter with RS 485 port 269 VFD type starter with scada communication along with by pass star delta starter 270 Main Piping & valves including common header, reflux valves 271 Traveling Trolley with Chain Pulley Block both electric operated 272 Provision ofSparesmotor and pump setof same duty as above to run pumping plant 24 hrs 273 25 Sqmm or suitable capacity, 3 1/2 core Aluminium Conductor PV insulated PVC/XLPE Sheethed armored Cable 274 2 Nos. Fire extinguisher of CO2 or ABC Type with sand bucket system 275 Power Wiring & Earthing material. 276 CE/UL Certified Radar type level transmitter for CWR 277 CE/UL Certified Pressure transmitter 278 Sluice valves with motor operated actuator of 150mm or suitable size 279 CE/UL Certified electromagnetic flowmeter of 200mm or suitable size 280 Rubber resistance sheet. 281 Supply of SCADA Compatible chlorination system 282 Erection and Painting of all equipments 283 Internal and external electrification of Pumping plant, Substation and DG Sets 284 Testing at manufacturers work and site of all above items 285 Testing and Commissioning of ZPS 286 DG SETS FOR ZPS 287 Supply of silent type DG set , engine ,alternatorcapable of developing 82.5 KVA or suitable capacity at 415+6% ,50Hz AC at.85 P.F. lagging and self exciting coupled with suitable BHPdiesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel 12 volt lead acide Battery with lead silencer manual control panel & AVM pads D.G. set shall be mounted in open sky resting on the foundation as per latest CPCB Norms. 288 Suitable AMF panel floor mounting type comprising of Ammeter/ Voltmeter with selector switch, power factor meter, short circuit protection of main supply, thermal over load protection, main supply voltage monitor short circuit protection relay, selector switch auto / manual/off, indicating lamps, push button start / stop / re-set etc. 289 Anti-Vibration mountings 290 Exhaust pipe, fuel line and fuel tank 291 Complete power wiring and earthing of D.G. set and AMF panel as per IER/PWD specification with necessary power and control cable, salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strip of adequate size 292 Installation of D.G. set and other accessories including commissioning and testing. 293 Construction of Sub-Station 294 11 KV floor mounting, single row type H.T. panel having 1 No. incoming and 2 Nos. outgoing VCB panels(Breaker and panel should be of same OEM) complete with insulated bus bars, all necessary metering, Trivector meter and safety equipments to be operated from SCADA also 295 11 KV / 0.415 KV, 100 KVA or suitable size outdoor, step down transformers as per latest amendment of IS 1180, Level II 296 11 KV XLPE cable of 3 x 70 sqmm or suitable size Al. armoured cable 297 1.1 KV XLPE cable of 3.5 x 95 sqmm or suitable size Al. armoured cable 298 Cable Jointing Kit for HT and LT type 299 Double earthing of all sub-station equipments complete with salt, charcoal, G.I. earth electrode, C.I. earth boxes, G.I. watering pipe, G.I. earth strip of adequate capacity and labour. 300 Erection and commissioning of all sub-station equipments 301 Protection units like fire buckets, extinguishers etc. 302 Testing of all equipments of sub-station at manufacturer’s works and at site 303 Construction of foundations of Transformers and panels 304 Fencing around outdoor Transformers including pebbles in yards etc. as per relevent standards 305 NOC From Electrical safety department 306 Automation of Units ofZPS at Zone 2 307 CE & UL Certified RTU/PLC with redundant CPU & Power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with Redundant CPU & power supply with analog & digital parameters & features as specified for intake to store and transmit data on GSM Backbone.RTU/PLC designed with logic to transfer data at multiple stations as specified in tender documents 308 GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer & gather data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender documents and all running expenses till DLP 309 CE/UL Certified Intelligent energy meters 310 Auto phase reversal Unit 160 Amp or suitable size 311 CE/UL Certified Surge Protector for control panel 312 CE/UL Certified 7 HMl touch screen suitable to communicate with PLC/RTU for Local display and control of Process Parameters 313 Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 Vand power equipments 314 Complete cabling for instrumentations including all power & control cable 315 Security Survelliance IP Camera 316 Installation,Testing and commissioning 317 Trial run 3 months 318 Trial run of ZPS with staff and chlorination but excluding elctricity for 3 months 319 Zone 3 320 Construction of Tubewell: 321 Drilling of Borehole for Tubewell construction by RC/DC Rig Machine including transportation, erection, dismantling of Rig and assosiated T&P complete in all respect including requried all material, labour etc. 322 Transportation, Erection, Dismantling of Rig Machine 323 Drilling of 600 mm. dia bore from G.L. to 60 m 324 Drilling of 500 mm. dia bore from 61 M to 100 m 325 Drilling of 500 mm. dia. Bore from 101 M to 200 M 326 Logging of bore hole by departmental/Approved electric logger 327 Zone Testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect 328 Tubewell assembly : 329 M.S. tubewell assembly with all required parts like plain, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. As per IS- 4270 330 300 MMØ Housing Pipe 7.1 mm thick 331 200 MMØ Plain Pipe 7.1 mm thick 332 200 MMØ Slotted Pipe 7.1 mm thick 333 Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. 334 300 mm. dia. Housing Pipe from G.L to 54 M BGL 335 200 mm. dia Plain/Slotted Pipe 54 M. BGL to 100 M BGL 336 200 mm. dia Plain/Slotted Pipe 101 M. BGL to 200 M. BGL 337 Pea Gravel (lalkuan) 338 Transportation, Installation Dismantling of 350 PSI Compressor 339 Charges for Development by 350 PSI Compressor per hour 340 Transportation, Erection Dismantling of 3 Cusec OP Unit and Yield test. 341 Charges for Development of TW by 3 Cusec OP Unit 342 Chemical and Bacteriological Test of water sample from departmental/ approved Lab. 343 Watch & Ward during construction period. 344 Barricading around the pit to prevent any posible Accident 345 Pumping Plants for above tubewells at zone 3 346 SITC of 1200 LPM, 30 M head (both tentative) for zone 3 tubewells Pumping plant consisting of control panel having soft starter (item as mentioned below) alongwith by pass star delta Starter, capacitor bank, breakers , cable, complete in all respect with all required material T&P labour etc. SITC of Main Piping (150mm,7.1mm thickness) & reflux valves with 24 mtr. Column pipe, Power wiring, earthing, painting, Tools sets, wiring of pump house (internal & External) Chain Pulley block and gauges complete in all respect with all required material , T&P labour 347 Supply of SCADA Compatible chlorination system 348 Spare Column Pipe 3 M Long heavy Duty 349 SITC of servo Stabilizer 15 KVA (110-300V)/(240V-500V) or suitable capacity 350 Sluice valves with motor operated actuator of size 150 mm or suitable size for rising main & bypass line 351 CE/UL Certified electromagnetic flowmeter of size 150mmor suitable size 352 Soft starter 15 HP or suitable capacity 353 CE/UL Certified hydrostatic type sub soil watel level transmitter for T/W 354 CE/UL Certified Pressure transmitter 355 Complete cabling of tubewell including all power & control cable for T/W 356 Automation of Units of T/W 357 CE & UL Certified RTU/PLC in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & power supply with analog & digital parameters & features as specified for T/W to store and transmit data on GSM Backbone.RTU/PLC designed with logic to transfer data at multiple stations as specified in tender documents 358 GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender documents and all running expenses till DLP 359 CE/UL Certified Intelligent energy meters 360 Auto phase reversal Unit 100 Amp or suitable size 361 CE/UL Certified Surge Protector for control panel 362 CE/UL Certified 7 HMl touch screen suitable to communicate with PLC/RTU for Local display and control of Process Parameters 363 Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 Vand power equipments 364 Security Survelliance IP Camera 365 Installation,Testing and commissioning 366 Trial run 3 months 367 Trial and run of each tubewell for 3 months including chlorination and operating staff excluding electricity 368 Zone 4 369 Construction of Tubewell: 370 Drilling of Borehole for Tubewell construction by RC/DC Rig Machine including transportation, erection, dismantling of Rig and assosiated T&P complete in all respect including requried all material, labour etc. 371 Transportation, Erection, Dismantling of Rig Machine 372 Drilling of 600 mm. dia bore from G.L. to 60 m 373 Drilling of 500 mm. dia bore from 61 M to 100 m 374 Drilling of 500 mm. dia. Bore from 101 M to 200 M 375 Logging of bore hole by departmental/Approved electric logger 376 Zone Testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect 377 Tubewell assembly : 378 M.S. tubewell assembly with all required parts like plain, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. As per IS- 4270 379 300 MMØ Housing Pipe 7.1 mm thick 380 200 MMØ Plain Pipe 7.1 mm thick 381 200 MMØ Slotted Pipe 7.1 mm thick 382 Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. 383 300 mm. dia. Housing Pipe from G.L to 54 M BGL 384 200 mm. dia Plain/Slotted Pipe 54 M. BGL to 100 M BGL 385 200 mm. dia Plain/Slotted Pipe 101 M. BGL to 200 M. BGL 386 Pea Gravel (lalkuan) 387 Transportation, Installation Dismantling of 350 PSI Compressor 388 Charges for Development by 350 PSI Compressor per hour 389 Transportation, Erection Dismantling of 3 Cusec OP Unit and Yield test. 390 Charges for Development of TW by 3 Cusec OP Unit 391 Chemical and Bacteriological Test of water sample from departmental/ approved Lab. 392 Watch & Ward during construction period. 393 Barricading around the pit to prevent any posible Accident 394 Pumping Plants for above tubewells at zone 4 395 SITC of 1200 LPM, 30 M head (both tentative) for zone 4 tubewells Pumping plant consisting of control panel having soft starter (item as mentioned below) alongwith by pass star delta Starter, capacitor bank, breakers , cable, complete in all respect with all required material T&P labour etc. SITC of Main Piping (150mm,7.1mm thickness) & reflux valves with 24 mtr. Column pipe, Power wiring, earthing, painting, Tools sets, wiring of pump house (internal & External) Chain Pulley block and gauges complete in all respect with all required material , T&P labour 396 Supply of SCADA Compatible chlorination system 397 Spare Column Pipe 3 M Long heavy Duty 398 SITC of servo Stabilizer 15 KVA (110-300V)/(240V-500V) or suitable capacity 399 Sluice valves with motor operated actuator of size 150 mm or suitable size for rising main & bypass line 400 CE/UL Certified electromagnetic flowmeter of size 150mmor suitable size 401 Soft starter 15 HP or suitable capacity 402 CE/UL Certified hydrostatic type sub soil watel level transmitter for T/W 403 CE/UL Certified Pressure transmitter 404 Complete cabling of tubewell including all power & control cable for T/W 405 Automation of Units of T/W 406 CE & UL Certified RTU/PLC in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & power supply with analog & digital parameters & features as specified for T/W to store and transmit data on GSM Backbone.RTU/PLC designed with logic to transfer data at multiple stations as specified in tender documents 407 GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender documents and all running expenses till DLP 408 CE/UL Certified Intelligent energy meters 409 Auto phase reversal Unit 100 Amp or suitable size 410 CE/UL Certified Surge Protector for control panel 411 CE/UL Certified 7 HMl touch screen suitable to communicate with PLC/RTU for Local display and control of Process Parameters 412 Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 Vand power equipments 413 Security Survelliance IP Camera 414 Installation,Testing and commissioning 415 Trial run 3 months 416 Trial and run of each tubewell for 3 months including chlorination and operating staff excluding electricity 417 Zone 7 418 Construction of Tubewell: 419 Drilling of Borehole for Tubewell construction by RC/DC Rig Machine including transportation, erection, dismantling of Rig and assosiated T&P complete in all respect including requried all material, labour etc. 420 Transportation, Erection, Dismantling of Rig Machine 421 Drilling of 600 mm. dia bore from G.L. to 60 m 422 Drilling of 500 mm. dia bore from 61 M to 100 m 423 Drilling of 500 mm. dia. Bore from 101 M to 200 M 424 Logging of bore hole by departmental/Approved electric logger 425 Zone Testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect 426 Tubewell assembly : 427 M.S. tubewell assembly with all required parts like plain, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. As per IS- 4270 428 300 MMØ Housing Pipe 7.1 mm thick 429 200 MMØ Plain Pipe 7.1 mm thick 430 200 MMØ Slotted Pipe 7.1 mm thick 431 Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. 432 300 mm. dia. Housing Pipe from G.L to 54 M BGL 433 200 mm. dia Plain/Slotted Pipe 54 M. BGL to 100 M BGL 434 200 mm. dia Plain/Slotted Pipe 101 M. BGL to 200 M. BGL 435 Pea Gravel (lalkuan) 436 Transportation, Installation Dismantling of 350 PSI Compressor 437 Charges for Development by 350 PSI Compressor per hour 438 Transportation, Erection Dismantling of 3 Cusec OP Unit and Yield test. 439 Charges for Development of TW by 3 Cusec OP Unit 440 Chemical and Bacteriological Test of water sample from departmental/ approved Lab. 441 Watch & Ward during construction period. 442 Barricading around the pit to prevent any posible Accident 443 Pumping Plants for above tubewells at zone 7 444 SITC of 1200 LPM, 30 M head (both tentative) for zone 7 tubewells Pumping plant consisting of control panel having soft starter (item as mentioned below) alongwith by pass star delta Starter, capacitor bank, breakers , cable, complete in all respect with all required material T&P labour etc. SITC of Main Piping (150mm,7.1mm thickness) & reflux valves with 24 mtr. Column pipe, Power wiring, earthing, painting, Tools sets, wiring of pump house (internal & External) Chain Pulley block and gauges complete in all respect with all required material , T&P labour 445 Supply of SCADA Compatible chlorination system 446 Spare Column Pipe 3 M Long heavy Duty 447 SITC of servo Stabilizer 15 KVA (110-300V)/(240V-500V) or suitable capacity 448 Sluice valves with motor operated actuator of size 150 mm or suitable size for rising main & bypass line 449 CE/UL Certified electromagnetic flowmeter of size 150mmor suitable size 450 Soft starter 15 HP or suitable capacity 451 CE/UL Certified hydrostatic type sub soil watel level transmitter for T/W 452 CE/UL Certified Pressure transmitter 453 Complete cabling of tubewell including all power & control cable for T/W 454 Automation of Units of T/W 455 CE & UL Certified RTU/PLC in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & power supply with analog & digital parameters & features as specified for T/W to store and transmit data on GSM Backbone.RTU/PLC designed with logic to transfer data at multiple stations as specified in tender documents 456 GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender documents and all running expenses till DLP 457 CE/UL Certified Intelligent energy meters 458 Auto phase reversal Unit 100 Amp or suitable size 459 CE/UL Certified Surge Protector for control panel 460 CE/UL Certified 7 HMl touch screen suitable to communicate with PLC/RTU for Local display and control of Process Parameters 461 Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 Vand power equipments 462 Security Survelliance IP Camera 463 Installation,Testing and commissioning 464 Trial run 3 months 465 Trial and run of each tubewell for 3 months including chlorination and operating staff excluding electricity 466 Automation of Units of OHT, 467 FOR ZONE 4A 468 CE & UL certified Radar type level tranmitter for OHT 469 Motor OperatedActuator with Sluice Valve/Flow control valve (450 mm or suitable size) 470 CE / UL certified lectromagneticflowmeter of size:450mm or suitable size) 471 Dismantelling joint 450 mm or suitable size 472 Security Survelliance IP Camera 473 FOR ZONE 5A 474 CE & UL certified Radar type level tranmitter for OHT 475 Motor OperatedActuator with Sluice Valve/Flow control valve (300 mm or suitable size ) 476 CE / UL certified Eectromagneticflowmeter of size: 300 mm or suitable size 477 Dismantelling joint 300 mm or suitable size 478 Security Survelliance IP Camera
