|
| 1 | S&F Upvc 67 series acoustic proof casement (openable) windows of double glaze 5mm thick toughened glass in two layer filled with argon gas (Double Glazing Unit). Outer frame section will be of size 67 x 62 mm dimensions and sash / mullion section dimensionswill be67 x 78 mm or as per requirement \"z\" mullion and false mullion section Dimensions is 67 x 58 mm and 67 x 61 mm respectively . Double glazing bead of size 25.8 mm x 23 mm will be provided along with EPDM gasket to the frame sections / mullion & shutter sections including all builder hardware fittings complete. All the frame and shutter mullion section reinforced with required G.I Profile for the strength of the frame and shutter sections as per manufacturer\"sinstructrions. |
| 2 | S&F Upvc doorframe sections dimensions will be 67 x 62 mm and the door shutter sections dimensions will be 67 x 115 mm provided with required G.I reinforcement along with required hardware for the locking purpose andtoughened glass 5mm thick in two layer filled with argon gas(Double Glazed Unit) for acoustic proofincluding mortice lock and all builder hardware fittings complete as per manufacturer\"sinstructrions. |
| 3 | S&F Upvc 67 series fixed type acoustic proof double glazed Unit glass with multi pannel not exc 1.08Sqm each (Three member in horizontal and for vertical member not exc 0.90m interval vertical section to make a fixed glazing) window 5mm thick toughened glass in two layer filled with argon gas with all necessary hardware. Frame section of size 67x62mm dimensions and mullion section of size 67x78mm along with G.I profile as reinforcement. Glazing bead will be provided with EPDM gasket to hold the glass etc. complete all as specified and directed. |
| 4 | S&F Zebra Blinds/Roller Blinds of size from 25mm to 75mm as required (as combination of colour approved by user White/Blue/Red etc)for Windows Home Décor Windows Zebra Blinds for Window Roller Blinds Room Darkening Roller Blinds for home, Office of window with complete functioning arrangement including all fitting/fixtures complete all as specified and directed |
| 5 | Roughening surfaces of old concrete floor by picking sweeping clean & washing down with water to remove dust etc. |
| 6 | M&L 20 mm thick Granite (of any Colour any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incluiding screed bed15mm thick in CM 1:4 complete all as specified and directed. |
| 7 | S & F Door closer Aluminium (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and directed. |
| 8 | M&L for Cutting holes intoor through cementconcrete slabs,chajjas, etc. reinforced or otherwise Exc 100 Sqcm but n exc 250 sqcm complete all as specified and directed. |
| 9 | M&L for cement concrete Type B1 1:2:4using 20 mmgraded crushed stone aggregare in roofkerbs or mud stops, rounded orchamfered on edges and inin lintels upto1.5m clearspan,cills,steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates,watertroughs and the like includingweathering,slightly roundedor chamfered angles andthroating, complete all as specified and directed. |
| 10 | S&F MS angles for posts and fencing including cutting tops to shape as directed, Drilling holes notching for wire, welding etc. Flat iron fillets for securing wires including all necessarydrilling,boltingor riveting, etc.,and similar work conforming toFe-290 Gde E-165 complete all as specified and directed. |
| 11 | M&L two coats of synthetic enamel paint over and including one coat of red oxide primer on new steel surface of any description over 10 cm in width or girth not otherwise described including preparation complete all as specified and directed. |
| 12 | Material & Labour for complete removal of wall surface andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over prepared surface complete all as specified and directed. |
| 13 | S&F for galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and orovising of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Note : Each line wire shall be measured) |
| 14 | S&F of CONSEC ZAL Super Punch barb tape (SRPBT) Aluminum base helix coil with and include necessary GI fixing clips for securing complete all as specified and as directed with following specification:- (i) Dia of coil(unstreched-610 mm (ii) No of circle-51 turns per coil(iii) weight of each coil with hessian pack-8.5kg.(iv) Coverage per coil-8RM (v) Central core wire:-made from 2.6mm dia GI-H.T.S.S wire as per IS-4454 galvanized as per IS 2629.(vi) Razor Punched tape is CONSEC-ZAL steel comprising of AL base with Zinc alloy @ 150 gm/m2 conforming to ASTM-729/A-729M with additional primer treatment of Epoxy/Polyurethane & final paint top coat of Caulified green shade(BSL 139) by Hot Dipping process. The item also includings supply of 3 nos of Horizontal ZAL runner wire for fixing of Concertina coil complete all as specified and directed. |
