37. Tender For Maintenance Work In The Verandah Of District Panchayat Office - 1 Earthwork In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 Min Width Or 10 Sqmon Plan), Including , mirzapur-Uttar Pradesh

37. Tender for maintenance work in the verandah of District Panchayat office - 1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqmon plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2 Providing and laying in position cement concrete of 1:3:6 (1 cement: 3 sand : 6 40mm nominal size stone aggregate) grade excluding cost of centering and shuttering all work upto plinth level 3 1:1.5:3 (1 cement: 1.5 coarse sand : 20 mm nominal size aggregate) R.C.C. work in wall (any thickness) including attached plaster, butteresses, plinth and string coarse, fillets, columns, pillars, piers, abutments, posts and struts etc. excluding cost of centerring shuttering, finishing and reinforcement 4 Steel reinforcement for R.C.C. work including streightening, cutting, bending, placing and binding all complete. 5 Steel work in builtup tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hosting, fixing in position and applying a priming coat of approved steel primer including welding and boltrd with special shape washer etc. copmplete 6 Providing and fixing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washrs filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 7 Finishing with Epoxy paint (two or more coats) at all locations preparedand applied as per manufacturer’s specifications including appropriatepriming coat, preparation of surface, etc. complete. on steel work 8 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to chieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 9 Providing and laying in position cement concrete of 1:3:6 (1 cement: 3 sand : 6 40mm nominal size stone aggregate) grade excluding cost of centering and shuttering all work upto plinth level 10 Brick work with common burnt clay modular bricks of designation 7.5 in foundation and plinth in cement mortar 1:4) 11 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) 12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to chieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 14 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 15 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick 16 Rubbing and polishing pf old kota stone floor of ofiice floor 17 (i) 35 mm thick 18 Mild steel or iron workofsmall sizes and sections suchand holding down bolts, holdfasttierods,gratings etc. ( when notincludedinan overall rates) wroughttorequiredfromincluding supply ofsteel anditswastage includingcostof bolts, nuts if required forandwelding, grinding and making holes as required completion of workfabricationofholesdoors, chaukhats nosing. Fabrication of holdfastfordoor chaukhats and windows. 19 Fabrication of grill / stairscase railing. 20 Fabrication of Z-section steel windows. With open panel 21 Fabricationof angleiron door chaukhat of 35*35*5 mm. 22 (a) Door chaukhats 23 (c) Ventilator chaukhats 24 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately) 25 300x16 mm 26 250x10 mm 27 Providing and fixing oxidised handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm 28 Miscellaneous work.(Payment will be paid as per actual work done on the basis of PWD schedule/DSR/market rate).

INR 1180 /-

INR 20000.0 /-

INR 10 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB