Tender For Providing Required Material / Equipments And Allied Works For Abhyashika At Lonand Nagarpanchyat Lonand-1 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding,preparing the surface, applying the acrylic wall putti etc. complete SSR 2022-23, P/ I - 225/35.23 2 Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete.As directed by En-gineer in charge. SSR 2022-23, P/ I - 224/35.20 3 Providing and fixing H.D.P container Syntex or a like one piece moulded water tank made out of lowden sity polythyler and built corrugation including of delivery up to dest in atinhoisting and fixing of accessories such as inlet,out let over flow of all tanks capacity above1000 to 20,000 litres SSR 2022-23, P/ I - 280/42.54 4 Providing and applying two coats of flat paint of approved colour to the old structural steel work and iron work previously painted building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Bd.0.6 Page 406 SSR 2022-23, P/ I - 223/35.09 5 Providing and fixing on walls /ceiling/ floor 20mm dia. CPVC pipe with necessary fittings ,remaking good the demolished portion etc.complete .Including removing existing pipeline if necessary and conveying stacking the same in PWD chowky or directed etc. complete SSR 2022-23, P/ I - 280/42.56 6 Providing and laying in trenches 32 mm CPVC pipeincluding necessary excavation, fittings. Refilling trenches etc.complete. Including removing existing pipe line necessar yand conveying and stacking same in PWD chowky or as directed complete. SSR 2022-23, P/ I - 281/42.64 7 Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as municipal requirements etc. complete. SSR 2022-23, P/ I - 277/42.36 8 Supplying and erecting shockproof 6A porcelain base T.Switch / bell push erected filled polypropylene board or polished double wooden block / 3 mm thick hylam sheet / 4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected PWD ELE.CSR 2022-23, I.No.- 1-5-1 9 Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base / flush type erected on filled polypropylene board or polished thick varnished double wooden block / folded or screwed board with top of either wooden / 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected. PWD ELE.CSR 2022-23, I.No.- 1-5-5 10 Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. PWD ELE.CSR 2022-23, I.No.- 1-5-7 11 Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WGPW/ SW PWD ELE.CSR 2022-23, I.No.- 1-7-17 12 Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF PWD ELE.CSR 2022-23, I.No.- 2-10-3 13 Supplying and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM with speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, with one meter of 3 core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation. 14 Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. PWD ELE.CSR 2022-23, I.No.- 2-10-14 15 Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. PWD ELE.CSR 2022-23, I.No.- 2-1-18 16 Providing & Erecting Plywood Partition of 75 mm Thick As Per Design of Department & Engineer Incharge Including Erecting Plywood Frame of Bay Size Upto 750 mm X 750 mm Made Up From 18 mm Thick Waterproof Plywood of ISI Standard Make of Component Size 36 mm X 50 mm (Strip of 18 mm Ply of 75 mm Wide Placing Back To Back ) Fixing 8 mm Waterproof Ply on Both Side of Partition. Pasteing Laminat ( Make - New Mica ) on 8 mm Ply Surface. partion Includes Providing & Fixing 8 mm Glass With Hitching As Per Design Said Partition Work Also includes Providing one Door of Required Size Made up of 32 mm Black Board, Teak Wood Liping on All Edges, 4 Hinges ( 3 Nos) Aldrops of Size 12 ( 2 Nos) & Patti, One Door Closer The Work Includes Providing All Neccessary Material For Making and Erecting Partition and all Laboure Charges, Taxes (Excluding GST ) etc complete.( All Plywood Will Be Waterproof ISI Standard i.e. Century Sainik 710 or Equivallent Make) Rate as per Rate Quatation 17 Meeting Table :- Providing and Fixing Meeting Table made of from 18 mm plywood as per design of department and engineer-in-charge and specification as below, Sizes 96 x 36 x 30 including 3 drawer of 4 x 24 x 20 with lock below table top two suppport of 18 mm ply at Middle All Plywwod is 18 mm thick of and waterproof ISI standard i.e. ( Century Sainik 710 or Equivallent Make, Laminate Make New Mica ) The Work Includes Providing All Neccessary Material For Making and all Laboure Charges, Taxes (Excluding GST ) etc complete. Rate As Per Rate Quotation 18 Study Table :- Providing and Fixing Study table made of from 18 mm plywood as per design of department and engineer-in-charge and specification as below, Sizes 96 x 46 x 30 , Partion with Foot Rest at Center of table, Pasting laminate on top all sides & oil Paint on Inside and below table top All plywwod is 19 mm thick of and waterproof ISI standard i.e. ( Century Sainik 710 or Equivallent Make, Laminate Make New Mica) The Work Includes Providing All Neccessary Material For Making and all Laboure Charges, Taxes (Excluding GST ) etc complete. Rate As Per Rate Quotation 19 Kapat For Library :- Providing and Fixing Kapat For Library made of from 18 mm plywood as per design of department and engineer-in-charge and specification as below, Sizes 96 x 48 x 14 , Verticle Support Both side and Middle and for self of book 18 mm ply on Backside 12 mm thick ply it includes 7 nos of self. Pasting Laminate on Sides on front 4 mm Glass Sliding Door With Powder Coated Aluminim (Zindal Make) Locking Arrgement All plywwod is 19 mm thick of and waterproof ISI standard i.e. ( Century Sainik 710 or Equivallent Make, Laminate make Mica) The Work Includes Providing All Neccessary Material For Making and all Laboure Charges, Taxes (Excluding GST complete. Rate As Per Rate Quotation 20 Chair : - Rovoling Chair With Crom Palted Handle & stand Foam For Sitting and Back Seat with Resin Cover, As Per Specification and Design of Department and Engineer In Charge. Rate As Per Rate Quotation 21 Chair : - Rovoling Chair With Fiber Body Powder Coated Stand And Fabric Foam, As Per Specification and Design of Department and Engineer In Charge. Rate As Per Rate Quotation 22 Chair : - Fiber Chairs, As Per Specification and Design of Department and Engineer In Charge. Rate As Per Rate Quotation 23 Computer : - Supplying and Installation Desktop Personal Computer of Branded Make i.e. Dell or HP Per Specification as Below Processor - Core i3, Ram - 8 GB, Hard Disk SSD 512, Operating System Windows - Licesens Copy - Software - Microsoft - Office (Licesense Copy) , Kayboard & Mouse, Moniter - Screen - 19.5 Warranty - 1 Year 24 EcoTank M200 Multifunction B&W Printer : - Make Epson, Model M- 200 ( Print / Copy / Scan Warranty of 1 year 25 Uninterruptible Power Supply (UPS) : Capacity - 600 VA ( 20 min Backup ) Make Artist / Zebrronic / Zebion 26 Purifier With Cooling System : - Water Purifier of Capcity 25 lit / per Hour With Cooler of Storage capcity 40 Liter As Per Specification and Design of Department and Engineer In Charge.
