Tender For 28038520_Pulley,Convr,Ndv 28038520 0001 0001 300863305 PULLEY,CONVR,NDV,500X750MM,90X1130MM,16 Technical Details Name : Nilesh Shah Contact : Email : nileshkumar.shah@amns.in 4 NO PULLEY,CONVEYOR TYPE:NON DRIVE , DRUM PULLEY DIA X FACE WIDTH:500X750 MM BELT WIDTH:650 MM SHAFT DIA AT BEARING X OVERALL SHAFT LENGTH:90X1130 MM DRUM SHELL THICKNESS:16 MM , LAGGING THICKNESS:12 MM LAGGING PATTERN:PLAIN RUBBER , SHAFT MATERIAL:E250 BR (IS-2062) BEARINGS CENTRE DISTANCE:1040 MM , BEARING DESIGNATION:22220CK+H320 BEARING-HOUSING DESIGNATION:SNA520 , HUB OR BUSHING TYPE:HUB HUB SIZE:210 MM , DRAWING DRG NO:SQ-03-0137/SR.7 DRAWING REV NO:1 Item Details : 1. In case of any query, vendor must discuss with AMNS or visit the site before offer submission or manufactuing process 2. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO terms 3. Pulleys are required as per PO Text only. Any variations without the written approval of AMNS will lead to material rejection. 4. Vendor to obtain AMNS clearance for TDS, GA DWG, QAP and other technical parameters before manufacturing 5. Inspection and Test Reports (Physical, Chemical, UT etc.) are required for dispatch clearance to vendor (AMNS Discretion) 6. Pulleys are to be packed for ease of unloading and handling at site. Loose material will not be accepted. 7. Pulleys are required to be covered with impregnated tarpaulin or other material suitable for outdoor yard storage 8. Material to be dispatched as per AMNS Dispatch Clearance Only, non-compliance may result in material rejection Item Note : 2 28038520 0002 0002 300863299 PULLEY,CONVR,NDV,250X750MM,65X1110MM,16 Technical Details Name : Nilesh Shah Contact : Email : nileshkumar.shah@amns.in 1 NO PULLEY,CONVEYOR TYPE:NON DRIVE , DRUM PULLEY DIA X FACE WIDTH:250X750 MM BELT WIDTH:650 MM SHAFT DIA AT BEARING X OVERALL SHAFT LENGTH:65X1110 MM DRUM SHELL THICKNESS:16 MM , LAGGING THICKNESS:12 MM LAGGING PATTERN:PLAIN RUBBER , SHAFT MATERIAL:E250 BR (IS-2062) BEARINGS CENTRE DISTANCE:1040 MM , BEARING DESIGNATION:22215CK+H315 BEARING-HOUSING DESIGNATION:SNA515 , HUB OR BUSHING TYPE:HUB HUB SIZE:190 MM , DRAWING DRG NO:SQ-03-0137/SR.1 DRAWING REV NO:0 Item Details : 1. In case of any query, vendor must discuss with AMNS or visit the site before offer submission or manufactuing process 2. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO terms 3. Pulleys are required as per PO Text only. Any variations without the written approval of AMNS will lead to material rejection. 4. Vendor to obtain AMNS clearance for TDS, GA DWG, QAP and other technical parameters before manufacturing 5. Inspection and Test Reports (Physical, Chemical, UT etc.) are required for dispatch clearance to vendor (AMNS Discretion) 6. Pulleys are to be packed for ease of unloading and handling at site. Loose material will not be accepted. 7. Pulleys are required to be covered with impregnated tarpaulin or other material suitable for outdoor yard storage 8. Material to be dispatched as per AMNS Dispatch Clearance Only, non-compliance may result in material rejection Item Note : 3 28038520 0003 0003 300921103 PULLEY,CONVR,DV,1000X1300MM,160X2090MM Technical Details Name : Nilesh Shah Contact : Email : nileshkumar.shah@amns.in 1 NO PULLEY,CONVEYOR TYPE:DRIVE , DRUM PULLEY DIA X FACE WIDTH:1000 X 1300 MM BELT WIDTH:1200 MM SHAFT DIA AT BEARING X OVERALL SHAFT LENGTH:160 X 2090 MM DRUM SHELL THICKNESS:20 MM , LAGGING THICKNESS:12 MM LAGGING PATTERN:DIAMOND GROOVE SHAFT MATERIAL:FORGED - 42CRMO4-DIN17200 VOLUME HARDENED & TEMPERED TO 220-250 BHN SHAFT EXTENSION (ONLY FOR DRIVE TYPE):SINGLE SIDE EXTENSION SHAFT LENGTH:160 MM , BEARINGS CENTRE DISTANCE:1700 MM BEARING DESIGNATION:23136 CCK/W33 , BEARING-HOUSING DESIGNATION:SNL3136 HUB OR BUSHING TYPE:HUB , SHELL MATERIAL:E250 BR - IS 2062 HUB MATERIAL:E250 BR - IS 2062 , DRAWING DRG NO:SQ-03-182 DRAWING REV NO:0 Item Details : 1. In case of any query, vendor must discuss with AMNS or visit the site before offer submission or manufactuing process 2. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO terms 3. Pulleys are required as per PO Text only. Any variations without the written approval of AMNS will lead to material rejection. 4. Vendor to obtain AMNS clearance for TDS, GA DWG, QAP and other technical parameters before manufacturing 5. Inspection and Test Reports (Physical, Chemical, UT etc.) are required for dispatch clearance to vendor (AMNS Discretion) 6. Pulleys are to be packed for ease of unloading and handling at site. Loose material will not be accepted. 7. Pulleys are required to be covered with impregnated tarpaulin or other material suitable for outdoor yard storage 8. Material to be dispatched as per AMNS Dispatch Clearance Only, non-compliance may result in material rejection Item Note : Page 2 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000127295 Date 13.01.2025 Submission Date 24.01.2025 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Pratibha Jain Contact Email Pratibha.Jain@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 4 28038520 0004 0004 300921104 PULLEY,CONVR,NDV,1000X1300MM,140X1850MM Technical Details Name : Nilesh Shah Contact : Email : nileshkumar.shah@amns.in 2 NO PULLEY,CONVEYOR TYPE:NON DRIVE , DRUM PULLEY DIA X FACE WIDTH:1000 X 1300 MM BELT WIDTH:1200 MM SHAFT DIA AT BEARING X OVERALL SHAFT LENGTH:140 X 1850 MM DRUM SHELL THICKNESS:20 MM , LAGGING THICKNESS:12 MM LAGGING PATTERN:DIAMOND GROOVE SHAFT MATERIAL:FORGED - 42CRMO4-DIN17200 VOLUME HARDENED & TEMPERED TO 250-280 BHN BEARINGS CENTRE DISTANCE:1700 MM , BEARING DESIGNATION:22232 CCK/W33 BEARING-HOUSING DESIGNATION:SNL532 , HUB OR BUSHING TYPE:HUB SHELL MATERIAL:E250-BR IS 2062 , HUB MATERIAL:E250-BR IS 2062 DRAWING DRG NO:SQ-03-0183 , DRAWING REV NO:0 Item Details : 1. In case of any query, vendor must discuss with AMNS or visit the site before offer submission or manufactuing process 2. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO terms 3. Pulleys are required as per PO Text only. Any variations without the written approval of AMNS will lead to material rejection. 4. Vendor to obtain AMNS clearance for TDS, GA DWG, QAP and other technical parameters before manufacturing 5. Inspection and Test Reports (Physical, Chemical, UT etc.) are required for dispatch clearance to vendor (AMNS Discretion) 6. Pulleys are to be packed for ease of unloading and handling at site. Loose material will not be accepted. 7. Pulleys are required to be covered with impregnated tarpaulin or other material suitable for outdoor yard storage 8. Material to be dispatched as per AMNS Dispatch Clearance Only, non-compliance may result in material rejection Item Note : 5 28038520 0005 0005 300153174 DEFLECTION WHEEL 1000 X 1300 X 135 BRG Technical Details Name : Nilesh Shah Contact : Email : nileshkumar.shah@amns.in 2 NO WHEEL SIZE : 1000 X 1300 X 135 MM ADDITIONAL INFORMATION : 120 FACE WIDTH X 20SHELL X 45 END DISK X 135 DIA BEARING #### DEFLECTION WHEEL 1000 X 1300 X 135 BRG ### 1000DIA X 120 FACE WIDTH X 20SHELL X 45 END DISK X 135 DIA BEARING Item Details : 1. In case of any query, vendor must discuss with AMNS or visit the site before offer submission or manufactuing process 2. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO terms 3. Pulleys are required as per PO Text only. Any variations without the written approval of AMNS will lead to material rejection. 4. Vendor to obtain AMNS clearance for TDS, GA DWG, QAP and other technical parameters before manufacturing 5. Inspection and Test Reports (Physical, Chemical, UT etc.) are required for dispatch clearance to vendor (AMNS Discretion) 6. Pulleys are to be packed for ease of unloading and handling at site. Loose material will not be accepted. 7. Pulleys are required to be covered with impregnated tarpaulin or other material suitable for outdoor yard storage 8. Material to be dispatched as per AMNS Dispatch Clearance Only, non-compliance may result in material rejection Item Note : 6 28038520 0006 0006 300926973 PULLEY,CONVR,DV,600X750MM,125X1375MM Technical Details Name : Nilesh Shah Contact : Email : nileshkumar.shah@amns.in 1 NO PULLEY,CONVEYOR TYPE:DRIVE , DRUM PULLEY DIA X FACE WIDTH:600X750 MM BELT WIDTH:650 MM SHAFT DIA AT BEARING X OVERALL SHAFT LENGTH:125X1375 MM DRUM SHELL THICKNESS:16 MM , LAGGING THICKNESS:12 MM LAGGING PATTERN:DIAMOND GROOVE SHAFT MATERIAL:42CRMO4-DIN17200 VOLUME HARDENED & TEMPERED 280 - 320 BHN SHAFT EXTENSION (ONLY FOR DRIVE TYPE):SINGLE SIDE EXTENSION SHAFT LENGTH:125 MM , BEARINGS CENTRE DISTANCE:1040 MM BEARING DESIGNATION:22228CCK+H3128 , BEARING-HOUSING DESIGNATION:SN528 HUB OR BUSHING TYPE:HUB , SHELL MATERIAL:E250 BR-IS 2062 HUB MATERIAL:E250 BR-IS 2062 , END DIAPHRAM MATERIAL:E250 BR-IS 2062 DIMENSION STANDARD:IS:8531 , DRAWING DRG NO:SQ-03-0185 DRAWING REV NO:0 Item Details : 1. In case of any query, vendor must discuss with AMNS or visit the site before offer submission or manufactuing process 2. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO terms 3. Pulleys are required as per PO Text only. Any variations without the written approval of AMNS will lead to material rejection. 4. Vendor to obtain AMNS clearance for TDS, GA DWG, QAP and other technical parameters before manufacturing 5. Inspection and Test Reports (Physical, Chemical, UT etc.) are required for dispatch clearance to vendor (AMNS Discretion) 6. Pulleys are to be packed for ease of unloading and handling at site. Loose material will not be accepted. 7. Pulleys are required to be covered with impregnated tarpaulin or other material suitable for outdoor yard storage 8. Material to be dispatched as per AMNS Dispatch Clearance Only, non-compliance may result in material rejection Item Note : Page 3 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000127295 Date 13.01.2025 Submission Date 24.01.2025 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Pratibha Jain Contact Email Pratibha.Jain@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 7 28038520 0007 0007 300928324 BEATER,BELT,PULLEY,75MM,1800MM,25MM,1700 Technical Details Name : Nilesh Shah Contact : Email : nileshkumar.shah@amns.in 1 NO BEATER,BELT TYPE:PULLEY , SHAFT DIAMETER AT BEARING:75 MM SHAFT LENGTH:1800 MM SHELL DIMENSION (FACEWIDTHXDIAMETERXTHICKNESS):700 X 630 X 20 MM ROD DIAMETER:25 MM , BEARING CENTRE DISTANCE:1700 BELT WIDTH:1200 MM , HUB OR BUSHING TYPE:HUB SHELL MATERIAL:E250BR-IS2062 , HUB MATERIAL:E250BR-IS2062 SHAFT MATERIAL:FORGED 42CRMO4 - DIN17200 VOLUME HARDENED & TEMPERED TO 250-280 BHN ROD MATERIAL:C45+C , BEARING-HOUSING DESIGNATION:SN517 BEARING DESIGNATION:22217 CK , DRAWING DRG NO:SQ-03-0186 DRAWING REV NO:0 Item Details : 1. In case of any query, vendor must discuss with AMNS or visit the site before offer submission or manufactuing process 2. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO terms 3. Pulleys are required as per PO Text only. Any variations without the written approval of AMNS will lead to material rejection. 4. Vendor to obtain AMNS clearance for TDS, GA DWG, QAP and other technical parameters before manufacturing 5. Inspection and Test Reports (Physical, Chemical, UT etc.) are required for dispatch clearance to vendor (AMNS Discretion) 6. Pulleys are to be packed for ease of unloading and handling at site. Loose material will not be accepted. 7. Pulleys are required to be covered with impregnated tarpaulin or other material suitable for outdoor yard storage 8. Material to be dispatched as per AMNS Dispatch Clearance Only, non-complianc
