Tender For Covering Of Pathway, mohali-Punjab

Tender For Covering Of Pathway; 1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2 All kinds of soil. 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from naturalsources : 8 graded stone aggregate 40 mm nominal sizederived from natural sources) 5 Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level : 6 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 7 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. 8 Thermo-Mechanically Treated bars of grade Fe-500D or more 9 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 11 Electric resistance or induction butt welded tubes 12 Providing and fixing bolts including nuts and washers complete. 13 Providing corrugated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheetscomplete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required. 14 0.80 mm thick with zinc coating not less than 275 gm/m² 15 Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade : 16 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 17 P/f of Construction welded wire mesh having tensile strength of 350-550 N/sqmm and apperature of 20x20mm to be fixed over the purlin to hold the stubble/husk (for insulation) and bind the stubble/husk from the top with binding wire/ suitable mechanism to rest the precoated GI sheet,as desired and all complete(stubble/husk to be provided by the Institute)

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	18-01-2025	Tender EMD/fee	Other	29-01-2025
2	23-01-2025	Correction in BOQ and revise date	Date	30-01-2025

INR 1180 /-

INR 190100.0 /-

INR 94.53 Lakhs /-