Tender for the work of functioning/repair of fire hydrant and fire alarm system installed in District Court Barabanki - 1 Providing laying, testing & commissioning of C class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 2 150 mm dia 3 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 4 200 mm dia 5 100 mm dia 6 80 mm dia 7 50 mm dia 8 Supplying, fixing, testing and commissioning of double flange sluice valve of PN 1.6 rating with non rising spindle,bronze/gun metal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 780 of following sizes as required : 9 150 mm dia 10 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 11 80 mm dia 12 150 mm dia 13 100 mm dia 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : 15 100 mm dia 16 150 mm dia 17 80 mm dia 18 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic(Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 19 30 m 20 S/F of Single headed yard hydrant valve with instantaneous Gunmetal/Stainless steel coupling of IS 5290 (TYPE-A) with blank Gunmetal/Stainless steel cap and chain as required. 21 Single Headed Stainless Steel 22 SITC of C.I. Foot Valve complete with Nuts, Bolts, Washer (Kartar/Sir/Zoloto) 23 100 mm dia 24 150 mm dia 25 80 mm dia 26 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636(type-A) as required : 27 Stainless Steel (Grade 304) 28 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : 29 Stainless Steel (Grade 304) 30 Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 31 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 32 SITC of Hose Cabinet box of 18 SWG M.S. Sheet with Glass Fronted included locking door to accommodate 2 Nos. RRL Hose & 1 Nos. Branch Pipe with Nozzle. 33 Internal 34 External 35 SITC of Pressure Gauge complete in all respect. 36 S/F of GM Ball Valve 50mm dia, complete Make: Sir/Kortar/Kirloskar/Zolato 37 SITC of Air Release Valve complete in all respect. 38 Painting work of MS fire Pipe by applying one coat of AntiCorrosive Primer and two coat of PO Red Paint after cleaning the surface included all cost of material. Skilled labour and T&P, C.P. Complete. 39 150 mm dia 40 80 mm dia 41 Repairing of Main Pump Electrical operated TEFC Type induction motor of 60 HP including suitable Pump 70 Mtr. Head with 2280 LPM Such as Charging and changing of damage part. Completed with labour material, T & P, C.P. etc. complete in all Respect, Test & Trial. - varnish the Motor -base plate - Tyre Coupling - Head -Impeller -Seal -Ballancing -Nut Bolt -Cleaning-Greasing, Painting etc. included all cost of material ,labour, T&P ,C.P. Test and Trial. Complete in all respect 42 Repairing and servicing of Diesel Engine Driven Pump 2280 LPM 70 Mtr. Head 1500 RPM 60 HP Horizental Fire pump with water cooled diesel engine with flexible coupling commen bed plate etc.for mounting the Deisel Engine and Pump Make- Kirlosker. Such as Charging and changing of damage part.- Lube Oil- Engine Oil- Fuel Oil- Lube Oil Filter- Fuel Oil Filter- Air Filter- Fuel Tank- Fire Engine Control Panel- Make-Up Tank for coolent- Over flow diesel pipe- AVM Pad- Flexible pipe- Stainer- Charger- Valve- Nut-Bolt- Cleaning- Greasing, Painting etc. included all cost of material ,labour, T&P ,C.P. Test and Trial. Complete in all respect 43 Rep. And Servicing of Electrical Driver TEFC Type induction motor of 10 HP 70 Mtr. Head with 180 LPM such as Tyre Coupling, Head, Impelor, etc such as changing damage and burn out part. -Moter Winding -base plate - Tyre Coupling - Head -Impeller -Seal -Ballancing -Nut Bolt -Cleaning - Painting etc. included all cost of material ,labour, T&P ,C.P. Test and Trial. Complete in all respect 44 Repairing of Electrical Driver Terrace Pump of 450 LPM with main Pressure of 2.0 Kg/Cm² included Suitable Base plate by Iron Channel,such as changing damage and burn out part. - Winding -Impeller - Stainless steel shaft - Mechanical sheal - Base Plate - Coupling - Coupling Guard - Foundation bolt - Painting etc. included all cost of material ,labour, T&P ,C.P. Test and Trial. Complete in all respect 45 Repairing of main Control Pannel for main Electric Motor 1 No. Diesel Engine & one No. Jockey, Pump with Starter switch, selector, Volt Meter, Amp. Meter, HRC, Fuse main switch, Control Relay, Starter, Indication Lamp such as changing damage and burn out part. -Amp Meter -Voltmeter -Starter Switch -Main Switch -Control Relay -Indication Lamp -iner connection with suitable size copper conductor cable -Earth Termanal - Mounting - ON - OFF Switch -Cleaning and Painting with vermin proof powder coated of approved shadeincluded all cost of material, labour, t&P used, C.P. etc. complete in all respect. 46 Repairing of Automatic starter panel suitable for Terrace pump 5 HP complete in all respect. 47 Repairing of Automatic Priming Arrangement for all Fire Pumps including Necessary Pipe fitting, water level controller, Pump Gase Valve etc. included labour, material T&P used C.P. and Test & Trial Complete. 48 Cleaning of Under Ground Fire sump (100000 Ltr) by Manual Labour, included, Labour, Material T&P, C.P. complete in all respect. 49 Dismantling of Under Ground Damage old Pipe including labour, T & P and C.P. complete in all Respect. 50 Painting work of 20mm dia Heavy Gauge Rigid steel after cleaning the surface by one of PO Red Panel included labour, material, T&P used C.P. complete in all respect. 51 SITC of Manual callbox of ABS Type in Surface/recess with stainless steel chain & hammer assembly complete with glass and push buttan etc as required. complete as required. 52 SITC of fire alarm sounder with facility to make announcement, mounted in M.S.box (16 SWG) wiyh hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. 53 SITC of Response indicatoron surface /recess M.S. box having two LEDs metailic cover with all connections etc. as required. 54 S/R of ionization smoke Detectoer as per specification including making connection with wire (Morley/Appolo / Edward) as per site Required. 55 S/R of Heat Detector Type as per specification including making connection (Morley / Ap/Edused) as per site Required. 56 SITC of 6 Zone fire Alarm local complete is all respect. With Auto Display (Make - Agni) 57 S/R of 6 Zone fire Alarm Main control Panel. Michro Processor Based with Public Address system complete in all respect (Make-Agni / Daksh/Edward 58 S/D of 2x1.5 Sq.mm. Cable fire Retardant PVC insulated copper conductor cable in the exixting surface/recessed steel SteelConduit as required. complete in all respect. 59 S/R of fire extinguisher ABC type 6.00 Kg. capacity (ISI Marked IS:15683& A.C. approved) complete with internal charge and wall bracket alongwith supply of all material and labour complete in all respect. 60 S/R of CO2 type fire extinguisher 4.5 Kg. capacity (ISI marked : 2878 & TAC approved) with intal changed and wall bracket along with supply of all material and labour for Proper complete of work. 61 Refilling of CO2 type fire extinguisher 4.5 Kg capacity complete with including change and wall Bracket I/C all cost of material labour and T&P used. 62 S/F of Fire Bucket round bottom mode of GI Sheet 9-11 Ltrs. capacity duly paited as per fire brigade design. Supported on Hanging Bracket changed and locked, Initially filled with river send, water as per direction of Engineer in Charges. 63 S/O Diesel Oil 64 S/F of 180 AH Heavy Duty Battery Exide Xpress included labour, transportation C.P. etc. complete in all respect. 65 Supply & fixing of ISI mark P.V.C. water tank (I,e. syntex or equvilant) with complete fitting and making base plate form for water tank 10000 Ltr. Capacity including arrangement of filling of tank pipe line etc.(Civil DSR) 66 S/B ofSafe Earthing600 mm x 600mm x6mm GI Plate Verticaly etc complete in all respect 67 S/L 25 mm x 5 mm GI Strip from earth electrodecomplete in all respects. 68 Add: GST @18%
